From: Oliver Neukum <oliver@xxxxxxxxxx>
This patch implements suspend and resume methods for the
option driver. With my hardware I can even suspend the system
and keep up a connection for a short time.
Signed-off-by: Oliver Neukum <oneukum@xxxxxxx>
Signed-Off-By: Matthias Urlichs <smurf@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/serial/option.c | 86 ++++++++++++++++++++++++++++++++++++++++---
1 files changed, 80 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 61ebddc..d560c0b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -62,6 +62,8 @@ static int option_tiocmget(struct tty_struct *tty, struct file *file);
static int option_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int option_suspend(struct usb_serial *serial, pm_message_t message);
+static int option_resume(struct usb_serial *serial);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
@@ -523,6 +525,8 @@ static struct usb_driver option_driver = {
.name = "option",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
.id_table = option_ids,
.no_dynamic_id = 1,
};
@@ -551,6 +555,8 @@ static struct usb_serial_driver option_1port_device = {
.attach = option_startup,
.shutdown = option_shutdown,
.read_int_callback = option_instat_callback,
+ .suspend = option_suspend,
+ .resume = option_resume,
};
static int debug;
@@ -821,10 +827,10 @@ static void option_instat_callback(struct urb *urb)
req_pkt->bRequestType, req_pkt->bRequest);
}
} else
- dbg("%s: error %d", __func__, status);
+ err("%s: error %d", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
- if (status != -ESHUTDOWN) {
+ if (status != -ESHUTDOWN && status != -ENOENT) {
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
@@ -843,7 +849,6 @@ static int option_write_room(struct tty_struct *tty)
portdata = usb_get_serial_port_data(port);
-
for (i = 0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && !test_bit(i, &portdata->out_busy))
@@ -1105,14 +1110,12 @@ bail_out_error:
return 1;
}
-static void option_shutdown(struct usb_serial *serial)
+static void stop_read_write_urbs(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
struct option_port_private *portdata;
- dbg("%s", __func__);
-
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
@@ -1122,6 +1125,17 @@ static void option_shutdown(struct usb_serial *serial)
for (j = 0; j < N_OUT_URB; j++)
usb_kill_urb(portdata->out_urbs[j]);
}
+}
+
+static void option_shutdown(struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __func__);
+
+ stop_read_write_urbs(serial);
/* Now free them */
for (i = 0; i < serial->num_ports; ++i) {
@@ -1152,6 +1166,66 @@ static void option_shutdown(struct usb_serial *serial)
}
}
+static int option_suspend(struct usb_serial *serial, pm_message_t message)
+{
+ dbg("%s entered", __func__);
+ stop_read_write_urbs(serial);
+
+ return 0;
+}
+
+static int option_resume(struct usb_serial *serial)
+{
+ int err, i, j;
+ struct usb_serial_port *port;
+ struct urb *urb;
+ struct option_port_private *portdata;
+
+ dbg("%s entered", __func__);
+ /* get the interrupt URBs resubmitted unconditionally */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ if (!port->interrupt_in_urb) {
+ dbg("%s: No interrupt URB for port %d\n", __func__, i);
+ continue;
+ }
+ port->interrupt_in_urb->dev = serial->dev;
+ err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+ dbg("Submitted interrupt URB for port %d (result %d)", i, err);
+ if (err < 0) {
+ err("%s: Error %d for interrupt URB of port%d",
+ __func__, err, i);
+ return err;
+ }
+ }
+
+ for (i = 0; i < serial->num_ports; i++) {
+ /* walk all ports */
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+ mutex_lock(&port->mutex);
+
+ /* skip closed ports */
+ if (!port->port.count) {
+ mutex_unlock(&port->mutex);
+ continue;
+ }
+
+ for (j = 0; j < N_IN_URB; j++) {
+ urb = portdata->in_urbs[j];
+ err = usb_submit_urb(urb, GFP_NOIO);
+ if (err < 0) {
+ mutex_unlock(&port->mutex);
+ err("%s: Error %d for bulk URB %d",
+ __func__, err, i);
+ return err;
+ }
+ }
+ mutex_unlock(&port->mutex);
+ }
+ return 0;
+}
+
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
--
1.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
