On Wed, Oct 04, 2017 at 08:10:59AM +0200, Takashi Iwai wrote:
> On Tue, 03 Oct 2017 19:42:21 +0200,
> Greg Kroah-Hartman wrote:
> >
> > On Tue, Oct 03, 2017 at 12:50:08PM -0400, Alan Stern wrote:
> > > On Tue, 3 Oct 2017, Takashi Iwai wrote:
> > >
> > > > > It's a dev_WARN because it indicates a potentially serious error in the
> > > > > driver: The driver has submitted an interrupt URB to a bulk endpoint.
> > > > > That may not sound bad, but the same check gets triggered if a driver
> > > > > submits a bulk URB to an isochronous endpoint, or any other invalid
> > > > > combination.
> > > > >
> > > > > Most likely the explanation here is that the driver doesn't bother to
> > > > > check the endpoint type because it expects the endpoint will always be
> > > > > interrupt. But that is not a safe strategy. USB devices and their
> > > > > firmware should not be trusted unnecessarily.
> > > > >
> > > > > The best fix is, like you said, to add a sanity check in the caller.
> > > >
> > > > OK, but then do we have some handy helper for the check?
> > > > As other bug reports by syzkaller suggest, there are a few other
> > > > drivers that do the same, submitting a urb with naive assumption of
> > > > the fixed EP for specific devices. In the end we'll need to put the
> > > > very same checks there in multiple places.
> > >
> > > Perhaps we could add a helper routine that would take a list of
> > > expected endpoint types and check that the actual endpoints match the
> > > types. But of course, all the drivers you're talking about would have
> > > to add a call to this helper routine.
> >
> > We have almost this type of function, usb_find_common_endpoints(),
> > what's wrong with using that? Johan has already swept the tree and
> > added a lot of these checks, odds are no one looked at the sound/
> > subdir...
>
> Well, what I had in my mind is just a snippet from usb_submit_urb(),
> something like:
>
> bool usb_sanity_check_urb_pipe(struct urb *urb)
> {
> struct usb_host_endpoint *ep;
> int xfertype;
> static const int pipetypes[4] = {
> PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
> };
>
> ep = usb_pipe_endpoint(urb->dev, urb->pipe);
> xfertype = usb_endpoint_type(&ep->desc);
> return usb_pipetype(urb->pipe) != pipetypes[xfertype];
> }
>
> And calling this before usb_submit_urb() in each place that assigns
> the fixed EP as device-specific quirks.
> Does it make sense?
Yes, kind of, but checking the endpoint type/direction is what you are
expecting it to be as you "know" what the type should be for each
driver as it is unique.
Anyway, a "real" patch might make more sense to me.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
