On Thursday 21 September 2017 12:56 AM, Alexandre Bailon wrote: > A couple of weeks ago, Sekhar reported a warning issue happening in > CPPI 4.1. The teardown sequence was not correctly programmed. > The caused was a couple of difference between the DSPS and the DA8xx. > These differences are the way to program the autoreq, the teardown and > the DMA mode. > This series intends to fix the teardown and to correctly program > the DMA mode. > > This series has been roughly tested. > I have only tried it on the DA580 LCK and the BeagleBone Black. > Only the device mode (msc and ecm) have been tested. Tested-by: Sekhar Nori <nsekhar@xxxxxx> Tested on DA850 LCDK using g_ether (module probe and removal) and g_ether (fast ping traffic test). It will be nice if this can go into v4.14-rc cycle as these are important fixes for DA850 platform. Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
