On Tue, Sep 26, 2017 at 08:45:17AM +0800, Li Jun wrote: > port-type is required for any typec port; default-role is only required > for drp; power source capable needs src-pdos; power sink capable needs > snk-pdos, max-snk-mv, max-snk-ma, op-snk-mw. > > Signed-off-by: Li Jun <jun.li@xxxxxxx> > --- > Documentation/devicetree/bindings/usb/typec.txt | 46 +++++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/typec.txt b/Documentation/devicetree/bindings/usb/typec.txt > new file mode 100644 > index 0000000..36d4467 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/typec.txt > @@ -0,0 +1,46 @@ > +Generic typec and power delivery properties > +------------------------------------------- > + > +Required properties: > +- port-type: should be one of "source", "sink" or "dual". > +- default-role: preferred power role if drp, should be "sink" or "source". > +- src-pdos: An array of u32 with each entry providing supported power > + source data object(PDO), the detailed bit definitions of > + PDO can be found in "Universal Serial Bus Power Delivery > + Specification" chapter 6.4.1.2 Source_Capabilities Message, > + the order of each entry(PDO) should follow the PD spec chapter > + 6.4.1. Required only for power source and power dual role with > + power delivery support. > +- snk-pdos: An array of u32 with each entry providing supported power > + sink data object(PDO), the detailed bit definitions of PDO > + can be found in "Universal Serial Bus Power Delivery > + Specification" chapter 6.4.1.3 Sink Capabilities Message, > + the order of each entry(PDO) should follow the PD spec chapter > + 6.4.1. Required only for power sink and power dual role with > + power delivery support. Wouldn't it be better to supply a property per detail and let the drivers construct the pdos as needed? > +- max-snk-mv: The max voltage the sink can support in millivoltage, required > + only for power sink and power dual role with power delivery > + support. > +- max-snk-ma: The max current the sink can support in milliampere, required > + only for power sink and power dual role with power delivery > + support. > +- op-snk-mw: Sink required operating power in milliwatts, if source offered > + power is less then it, Capability Mismatch is set, required > + only for power sink and power dual role with power delivery > + support. I'm a little bit concerned about these. Has any OF/DT guys reviewed them? We should also keep in mind that the same properties should also be possible to use with ACPI. That may not be a problem as such, but we should consult the ACPI guys as well. Thanks, -- heikki -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
