Per tcpci spec 4.4.5.2 ROLE_CONTROL description: "the TCPM shall
write B6 (DRP) =1b and the starting value of Rp/Rd to B3..0 (CC1/CC2)
to indicate DRP autonomous toggling mode to the TCPC", so add CC1/CC2
setting, also we should issue COMMAND.Look4Connection to start it.
Signed-off-by: Li Jun <jun.li@xxxxxxx>
---
drivers/staging/typec/tcpci.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/tcpci.c
index 851d026..cea67f9 100644
--- a/drivers/staging/typec/tcpci.c
+++ b/drivers/staging/typec/tcpci.c
@@ -109,6 +109,7 @@ static int tcpci_start_drp_toggling(struct tcpc_dev *tcpc,
{
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
unsigned int reg = TCPC_ROLE_CTRL_DRP;
+ int ret;
switch (cc) {
default:
@@ -126,7 +127,19 @@ static int tcpci_start_drp_toggling(struct tcpc_dev *tcpc,
break;
}
- return regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
+ if (cc == TYPEC_CC_RD)
+ reg |= (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) |
+ (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT);
+ else
+ reg |= (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) |
+ (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT);
+
+ ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
+ if (ret < 0)
+ return ret;
+
+ return regmap_write(tcpci->regmap, TCPC_COMMAND,
+ TCPC_CMD_LOOK4CONNECTION);
}
static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
--
2.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
