[PATCH v3 08/14] mux: Add Intel Cherrytrail USB mux driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Intel Cherrytrail SoCs have an internal USB mux for muxing the otg-port
USB data lines between the xHCI host controller and the dwc3 gadget
controller. On some Cherrytrail systems this mux is controlled through
AML code reacting on a GPIO IRQ connected to the USB OTG id pin (through
an _AIE ACPI method) so things just work.

But on other Cherrytrail systems we need to control the mux ourselves
this driver exports the mux through the mux subsys, so that other drivers
can control it if necessary.

This driver also updates the vbus-valid reporting to the dwc3 gadget
controller, as this uses the same registers as the mux. This is needed
for gadget/device mode to work properly (even on systems which control
the mux from their AML code).

Note this depends on the xhci driver registering a platform device
named "intel_cht_usb_mux", which has an IOMEM resource 0 which points
to the Intel Vendor Defined XHCI extended capabilities region.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
-Complete rewrite as a stand-alone platform-driver rather then as a phy
 driver, since this is just a mux, not a phy

Changes in v3:
-Make this a mux subsys driver instead of listening to USB_HOST extcon
 cable events and responding to those

Changes in v4 (of patch, v2 of new mux based series):
-Rename C-file to use - in name
-Add MAINTAINERS entry
-Various code-style fixes

Changes in v3 of new mux based series:
-Various code-style fixes
-Use new init_as_is mux flag
---
 MAINTAINERS                     |   5 +
 drivers/mux/Kconfig             |  11 ++
 drivers/mux/Makefile            |  10 +-
 drivers/mux/intel-cht-usb-mux.c | 251 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 273 insertions(+), 4 deletions(-)
 create mode 100644 drivers/mux/intel-cht-usb-mux.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 04e7a5b9d6bd..6cfa0e5f2d2b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9176,6 +9176,11 @@ F:	include/linux/dt-bindings/mux/
 F:	include/linux/mux/
 F:	drivers/mux/
 
+MULTIPLEXER SUBSYSTEM INTEL CHT USB MUX DRIVER
+M:	Hans de Goede <hdegoede@xxxxxxxxxx>
+S:	Maintained
+F:	drivers/mux/intel-cht-usb-mux.c
+
 MULTISOUND SOUND DRIVER
 M:	Andrew Veliath <andrewtv@xxxxxxx>
 S:	Maintained
diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
index 19e4e904c9bf..ebc04ae7ff30 100644
--- a/drivers/mux/Kconfig
+++ b/drivers/mux/Kconfig
@@ -34,6 +34,17 @@ config MUX_GPIO
 	  To compile the driver as a module, choose M here: the module will
 	  be called mux-gpio.
 
+config MUX_INTEL_CHT_USB_MUX
+	tristate "Intel Cherrytrail USB Multiplexer"
+	depends on ACPI && X86 && EXTCON
+	help
+	  This driver adds support for the internal USB mux for muxing the OTG
+	  USB data lines between the xHCI host controller and the dwc3 gadget
+	  controller found on Intel Cherrytrail SoCs.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called mux-intel-cht-usb-mux.
+
 config MUX_MMIO
 	tristate "MMIO register bitfield-controlled Multiplexer"
 	depends on (OF && MFD_SYSCON) || COMPILE_TEST
diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile
index 0e1e59760e3f..6cf41be2754f 100644
--- a/drivers/mux/Makefile
+++ b/drivers/mux/Makefile
@@ -5,9 +5,11 @@
 mux-core-objs			:= core.o
 mux-adg792a-objs		:= adg792a.o
 mux-gpio-objs			:= gpio.o
+mux-intel-cht-usb-mux-objs	:= intel-cht-usb-mux.o
 mux-mmio-objs			:= mmio.o
 
-obj-$(CONFIG_MULTIPLEXER)	+= mux-core.o
-obj-$(CONFIG_MUX_ADG792A)	+= mux-adg792a.o
-obj-$(CONFIG_MUX_GPIO)		+= mux-gpio.o
-obj-$(CONFIG_MUX_MMIO)		+= mux-mmio.o
+obj-$(CONFIG_MULTIPLEXER)		+= mux-core.o
+obj-$(CONFIG_MUX_ADG792A)		+= mux-adg792a.o
+obj-$(CONFIG_MUX_GPIO)			+= mux-gpio.o
+obj-$(CONFIG_MUX_INTEL_CHT_USB_MUX)	+= mux-intel-cht-usb-mux.o
+obj-$(CONFIG_MUX_MMIO)			+= mux-mmio.o
diff --git a/drivers/mux/intel-cht-usb-mux.c b/drivers/mux/intel-cht-usb-mux.c
new file mode 100644
index 000000000000..726facefd479
--- /dev/null
+++ b/drivers/mux/intel-cht-usb-mux.c
@@ -0,0 +1,251 @@
+/*
+ * Intel Cherrytrail USB OTG MUX driver
+ *
+ * Copyright (c) 2016-2017 Hans de Goede <hdegoede@xxxxxxxxxx>
+ *
+ * Loosely based on android x86 kernel code which is:
+ *
+ * Copyright (C) 2014 Intel Corp.
+ *
+ * Author: Wu, Hao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or (at your option)
+ * any later version.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mux/driver.h>
+#include <linux/mux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+/* register definition */
+#define DUAL_ROLE_CFG0			0x68
+#define SW_VBUS_VALID			(1 << 24)
+#define SW_IDPIN_EN			(1 << 21)
+#define SW_IDPIN			(1 << 20)
+
+#define DUAL_ROLE_CFG1			0x6c
+#define HOST_MODE			(1 << 29)
+
+#define DUAL_ROLE_CFG1_POLL_TIMEOUT	1000
+
+#define DRV_NAME			"intel_cht_usb_mux"
+
+struct intel_cht_usb_data {
+	struct mutex cfg0_lock;
+	void __iomem *base;
+	struct extcon_dev *vbus_extcon;
+	struct notifier_block vbus_nb;
+	struct work_struct vbus_work;
+};
+
+struct intel_cht_extcon_info {
+	const char *hid;
+	int hrv;
+	const char *extcon;
+};
+
+static const struct intel_cht_extcon_info vbus_providers[] = {
+	{ .hid = "INT33F4", .hrv = -1, .extcon = "axp288_extcon" },
+	{ .hid = "INT34D3", .hrv =  3, .extcon = "cht_wcove_pwrsrc" },
+};
+
+static int intel_cht_usb_set_mux(struct mux_control *mux, int state)
+{
+	struct intel_cht_usb_data *data = mux_chip_priv(mux->chip);
+	unsigned long timeout;
+	bool host_mode;
+	u32 val;
+
+	mutex_lock(&data->cfg0_lock);
+
+	/* Set idpin value as requested */
+	val = readl(data->base + DUAL_ROLE_CFG0);
+	if (state == MUX_USB_DEVICE) {
+		val |= SW_IDPIN;
+		host_mode = false;
+	} else {
+		val &= ~SW_IDPIN;
+		host_mode = true;
+	}
+	val |= SW_IDPIN_EN;
+	writel(val, data->base + DUAL_ROLE_CFG0);
+
+	mutex_unlock(&data->cfg0_lock);
+
+	/* In most case it takes about 600ms to finish mode switching */
+	timeout = jiffies + msecs_to_jiffies(DUAL_ROLE_CFG1_POLL_TIMEOUT);
+
+	/* Polling on CFG1 register to confirm mode switch.*/
+	do {
+		val = readl(data->base + DUAL_ROLE_CFG1);
+		if (!!(val & HOST_MODE) == host_mode)
+			return 0;
+
+		/* Interval for polling is set to about 5 - 10 ms */
+		usleep_range(5000, 10000);
+	} while (time_before(jiffies, timeout));
+
+	dev_warn(&mux->chip->dev, "Timeout waiting for mux to switch\n");
+	return -ETIMEDOUT;
+}
+
+static void intel_cht_usb_set_vbus_valid(struct intel_cht_usb_data *data,
+					     bool valid)
+{
+	u32 val;
+
+	mutex_lock(&data->cfg0_lock);
+
+	val = readl(data->base + DUAL_ROLE_CFG0);
+	if (valid)
+		val |= SW_VBUS_VALID;
+	else
+		val &= ~SW_VBUS_VALID;
+
+	val |= SW_IDPIN_EN;
+	writel(val, data->base + DUAL_ROLE_CFG0);
+
+	mutex_unlock(&data->cfg0_lock);
+}
+
+static void intel_cht_usb_vbus_work(struct work_struct *work)
+{
+	struct intel_cht_usb_data *data =
+		container_of(work, struct intel_cht_usb_data, vbus_work);
+	const unsigned int vbus_cables[] = {
+		EXTCON_CHG_USB_SDP, EXTCON_CHG_USB_CDP, EXTCON_CHG_USB_DCP,
+		EXTCON_CHG_USB_ACA, EXTCON_CHG_USB_FAST,
+	};
+	bool vbus_present = false;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vbus_cables); i++) {
+		if (extcon_get_state(data->vbus_extcon, vbus_cables[i]) > 0) {
+			vbus_present = true;
+			break;
+		}
+	}
+
+	intel_cht_usb_set_vbus_valid(data, vbus_present);
+}
+
+static int intel_cht_usb_vbus_extcon_evt(struct notifier_block *nb,
+					     unsigned long event, void *param)
+{
+	struct intel_cht_usb_data *data =
+		container_of(nb, struct intel_cht_usb_data, vbus_nb);
+
+	schedule_work(&data->vbus_work);
+
+	return NOTIFY_OK;
+}
+
+static const struct mux_control_ops intel_cht_usb_ops = {
+	.set = intel_cht_usb_set_mux,
+};
+
+static int intel_cht_usb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_cht_usb_data *data;
+	struct mux_chip *mux_chip;
+	struct resource *res;
+	resource_size_t size;
+	int i, ret;
+
+	mux_chip = devm_mux_chip_alloc(dev, 1, sizeof(*data));
+	if (IS_ERR(mux_chip))
+		return PTR_ERR(mux_chip);
+
+	mux_chip->ops = &intel_cht_usb_ops;
+	mux_chip->mux[0].idle_state = MUX_USB_DEVICE;
+	/* Keep initial state as is, for e.g. booting from an USB disk */
+	mux_chip->mux[0].init_as_is = true;
+	mux_chip->mux[0].states = MUX_USB_STATES;
+	data = mux_chip_priv(mux_chip);
+	mutex_init(&data->cfg0_lock);
+
+	/*
+	 * Besides controlling the mux we also need to control the vbus_valid
+	 * flag for device/gadget mode to work properly. To do this we monitor
+	 * the extcon interface exported by the PMIC drivers for the PMICs used
+	 * with the Cherry Trail SoC.
+	 *
+	 * We try to get the extcon_dev before registering the mux as this
+	 * may lead to us exiting with -EPROBE_DEFER.
+	 */
+	for (i = 0 ; i < ARRAY_SIZE(vbus_providers); i++) {
+		if (!acpi_dev_present(vbus_providers[i].hid, NULL,
+				      vbus_providers[i].hrv))
+			continue;
+
+		data->vbus_extcon = extcon_get_extcon_dev(
+						vbus_providers[i].extcon);
+		if (data->vbus_extcon == NULL)
+			return -EPROBE_DEFER;
+
+		dev_info(dev, "using extcon '%s' for vbus-valid\n",
+			 vbus_providers[i].extcon);
+		break;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	size = (res->end + 1) - res->start;
+	data->base = devm_ioremap_nocache(dev, res->start, size);
+	if (IS_ERR(data->base)) {
+		ret = PTR_ERR(data->base);
+		dev_err(dev, "can't iomap registers: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_mux_chip_register(dev, mux_chip);
+	if (ret < 0)
+		return ret;
+
+	if (data->vbus_extcon) {
+		INIT_WORK(&data->vbus_work, intel_cht_usb_vbus_work);
+		data->vbus_nb.notifier_call = intel_cht_usb_vbus_extcon_evt;
+		ret = devm_extcon_register_notifier_all(dev, data->vbus_extcon,
+							&data->vbus_nb);
+		if (ret) {
+			dev_err(dev, "can't register vbus extcon notifier: %d\n",
+				ret);
+			return ret;
+		}
+
+		/* Sync initial mode */
+		schedule_work(&data->vbus_work);
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id intel_cht_usb_table[] = {
+	{ .name = DRV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, intel_cht_usb_table);
+
+static struct platform_driver intel_cht_usb_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.id_table = intel_cht_usb_table,
+	.probe = intel_cht_usb_probe,
+};
+
+module_platform_driver(intel_cht_usb_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Intel Cherrytrail USB mux driver");
+MODULE_LICENSE("GPL");
-- 
2.14.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux