[PATCH] USB: gadgetfs: Fix crash caused by inadequate synchronization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The gadgetfs driver (drivers/usb/gadget/legacy/inode.c) was written
before the UDC and composite frameworks were adopted; it is a legacy
driver.  As such, it expects that once bound to a UDC controller, it
will not be unbound until it unregisters itself.

However, the UDC framework does unbind function drivers while they are
still registered.  When this happens, it can cause the gadgetfs driver
to misbehave or crash.  For example, userspace can cause a crash by
opening the device file and doing an ioctl call before setting up a
configuration (found by Andrey Konovalov using the syzkaller fuzzer).

This patch adds checks and synchronization to prevent these bad
behaviors.  It adds a udc_usage counter that the driver increments at
times when it is using a gadget interface without holding the private
spinlock.  The unbind routine waits for this counter to go to 0 before
returning, thereby ensuring that the UDC is no longer in use.

The patch also adds a check in the dev_ioctl() routine to make sure
the driver is bound to a UDC before dereferencing the gadget pointer,
and it makes destroy_ep_files() synchronize with the endpoint I/O
routines, to prevent the user from accessing an endpoint data
structure after it has been removed.

Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Reported-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
Tested-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
CC: <stable@xxxxxxxxxxxxxxx>

---


[as1841]


 drivers/usb/gadget/legacy/inode.c |   41 +++++++++++++++++++++++++++++++++-----
 1 file changed, 36 insertions(+), 5 deletions(-)

Index: usb-4.x/drivers/usb/gadget/legacy/inode.c
===================================================================
--- usb-4.x.orig/drivers/usb/gadget/legacy/inode.c
+++ usb-4.x/drivers/usb/gadget/legacy/inode.c
@@ -28,7 +28,7 @@
 #include <linux/aio.h>
 #include <linux/uio.h>
 #include <linux/refcount.h>
-
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/moduleparam.h>
 
@@ -116,6 +116,7 @@ enum ep0_state {
 struct dev_data {
 	spinlock_t			lock;
 	refcount_t			count;
+	int				udc_usage;
 	enum ep0_state			state;		/* P: lock */
 	struct usb_gadgetfs_event	event [N_EVENT];
 	unsigned			ev_next;
@@ -513,9 +514,9 @@ static void ep_aio_complete(struct usb_e
 		INIT_WORK(&priv->work, ep_user_copy_worker);
 		schedule_work(&priv->work);
 	}
-	spin_unlock(&epdata->dev->lock);
 
 	usb_ep_free_request(ep, req);
+	spin_unlock(&epdata->dev->lock);
 	put_ep(epdata);
 }
 
@@ -939,9 +940,11 @@ ep0_read (struct file *fd, char __user *
 			struct usb_request	*req = dev->req;
 
 			if ((retval = setup_req (ep, req, 0)) == 0) {
+				++dev->udc_usage;
 				spin_unlock_irq (&dev->lock);
 				retval = usb_ep_queue (ep, req, GFP_KERNEL);
 				spin_lock_irq (&dev->lock);
+				--dev->udc_usage;
 			}
 			dev->state = STATE_DEV_CONNECTED;
 
@@ -1131,6 +1134,7 @@ ep0_write (struct file *fd, const char _
 			retval = setup_req (dev->gadget->ep0, dev->req, len);
 			if (retval == 0) {
 				dev->state = STATE_DEV_CONNECTED;
+				++dev->udc_usage;
 				spin_unlock_irq (&dev->lock);
 				if (copy_from_user (dev->req->buf, buf, len))
 					retval = -EFAULT;
@@ -1142,6 +1146,7 @@ ep0_write (struct file *fd, const char _
 						GFP_KERNEL);
 				}
 				spin_lock_irq(&dev->lock);
+				--dev->udc_usage;
 				if (retval < 0) {
 					clean_req (dev->gadget->ep0, dev->req);
 				} else
@@ -1243,9 +1248,21 @@ static long dev_ioctl (struct file *fd,
 	struct usb_gadget	*gadget = dev->gadget;
 	long ret = -ENOTTY;
 
-	if (gadget->ops->ioctl)
+	spin_lock_irq(&dev->lock);
+	if (dev->state == STATE_DEV_OPENED ||
+			dev->state == STATE_DEV_UNBOUND) {
+		/* Not bound to a UDC */
+	} else if (gadget->ops->ioctl) {
+		++dev->udc_usage;
+		spin_unlock_irq(&dev->lock);
+
 		ret = gadget->ops->ioctl (gadget, code, value);
 
+		spin_lock_irq(&dev->lock);
+		--dev->udc_usage;
+	}
+	spin_unlock_irq(&dev->lock);
+
 	return ret;
 }
 
@@ -1463,10 +1480,12 @@ delegate:
 				if (value < 0)
 					break;
 
+				++dev->udc_usage;
 				spin_unlock (&dev->lock);
 				value = usb_ep_queue (gadget->ep0, dev->req,
 							GFP_KERNEL);
 				spin_lock (&dev->lock);
+				--dev->udc_usage;
 				if (value < 0) {
 					clean_req (gadget->ep0, dev->req);
 					break;
@@ -1490,8 +1509,12 @@ delegate:
 		req->length = value;
 		req->zero = value < w_length;
 
+		++dev->udc_usage;
 		spin_unlock (&dev->lock);
 		value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL);
+		spin_lock(&dev->lock);
+		--dev->udc_usage;
+		spin_unlock(&dev->lock);
 		if (value < 0) {
 			DBG (dev, "ep_queue --> %d\n", value);
 			req->status = 0;
@@ -1518,21 +1541,24 @@ static void destroy_ep_files (struct dev
 		/* break link to FS */
 		ep = list_first_entry (&dev->epfiles, struct ep_data, epfiles);
 		list_del_init (&ep->epfiles);
+		spin_unlock_irq (&dev->lock);
+
 		dentry = ep->dentry;
 		ep->dentry = NULL;
 		parent = d_inode(dentry->d_parent);
 
 		/* break link to controller */
+		mutex_lock(&ep->lock);
 		if (ep->state == STATE_EP_ENABLED)
 			(void) usb_ep_disable (ep->ep);
 		ep->state = STATE_EP_UNBOUND;
 		usb_ep_free_request (ep->ep, ep->req);
 		ep->ep = NULL;
+		mutex_unlock(&ep->lock);
+
 		wake_up (&ep->wait);
 		put_ep (ep);
 
-		spin_unlock_irq (&dev->lock);
-
 		/* break link to dcache */
 		inode_lock(parent);
 		d_delete (dentry);
@@ -1603,6 +1629,11 @@ gadgetfs_unbind (struct usb_gadget *gadg
 
 	spin_lock_irq (&dev->lock);
 	dev->state = STATE_DEV_UNBOUND;
+	while (dev->udc_usage > 0) {
+		spin_unlock_irq(&dev->lock);
+		usleep_range(1000, 2000);
+		spin_lock_irq(&dev->lock);
+	}
 	spin_unlock_irq (&dev->lock);
 
 	destroy_ep_files (dev);

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux