It has been noticed that the dwc2 udc state reporting doesn't seem to work (at least on HiKey boards). Where after the initial setup, the sysfs /sys/class/udc/f72c0000.usb/state file would report "configured" no matter the state of the OTG port. This patch adds a call so that we report to the UDC layer when the gadget device is disconnected. Cc: Wei Xu <xuwei5@xxxxxxxxxxxxx> Cc: Guodong Xu <guodong.xu@xxxxxxxxxx> Cc: Amit Pundir <amit.pundir@xxxxxxxxxx> Cc: YongQin Liu <yongqin.liu@xxxxxxxxxx> Cc: John Youn <johnyoun@xxxxxxxxxxxx> Cc: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx> Cc: Chen Yu <chenyu56@xxxxxxxxxx> Cc: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: linux-usb@xxxxxxxxxxxxxxx Reported-by: Amit Pundir <amit.pundir@xxxxxxxxxx> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx> --- drivers/usb/dwc2/gadget.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 7fd0e38..603c216 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3202,6 +3202,8 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg) call_gadget(hsotg, disconnect); hsotg->lx_state = DWC2_L3; + + usb_gadget_set_state(&hsotg->gadget, USB_STATE_NOTATTACHED); } /** -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
