On 08/09/2017 at 17:35, Romain Izard wrote:
> The contents of the System Clock Status Register (SCSR) needs to be
> restored into the System Clock Enable Register (SCER).
>
> As the bootloader will restore some clocks by itself, the issue can be
> missed as only the USB controller, the LCD controller, the Image Sensor
> controller and the programmable clocks will be impacted.
>
> Fix the obvious typo in the suspend/resume code, as the IMR register
> does not need to be saved twice.
>
> Signed-off-by: Romain Izard <romain.izard.pro@xxxxxxxxx>
Yes, it looks like a typo:
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
I didn't experienced the issue with LCD nor USB though.
Regards,
> ---
> drivers/clk/at91/pmc.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
> index 5c2b26de303e..07dc2861ad3f 100644
> --- a/drivers/clk/at91/pmc.c
> +++ b/drivers/clk/at91/pmc.c
> @@ -86,7 +86,7 @@ static int pmc_suspend(void)
> {
> int i;
>
> - regmap_read(pmcreg, AT91_PMC_IMR, &pmc_cache.scsr);
> + regmap_read(pmcreg, AT91_PMC_SCSR, &pmc_cache.scsr);
> regmap_read(pmcreg, AT91_PMC_PCSR, &pmc_cache.pcsr0);
> regmap_read(pmcreg, AT91_CKGR_UCKR, &pmc_cache.uckr);
> regmap_read(pmcreg, AT91_CKGR_MOR, &pmc_cache.mor);
> @@ -129,7 +129,7 @@ static void pmc_resume(void)
> if (pmc_cache.pllar != tmp)
> pr_warn("PLLAR was not configured properly by the firmware\n");
>
> - regmap_write(pmcreg, AT91_PMC_IMR, pmc_cache.scsr);
> + regmap_write(pmcreg, AT91_PMC_SCER, pmc_cache.scsr);
> regmap_write(pmcreg, AT91_PMC_PCER, pmc_cache.pcsr0);
> regmap_write(pmcreg, AT91_CKGR_UCKR, pmc_cache.uckr);
> regmap_write(pmcreg, AT91_CKGR_MOR, pmc_cache.mor);
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
