Hello
On Sun, Jul 30, 2017 at 07:53:03AM +0800, gustavo panizzo wrote:
Hi
On Mon, Jul 24, 2017 at 12:53:27PM +0300, Felipe Balbi wrote:
Hi,
gustavo panizzo <gfa@xxxxxxxxxxxx> writes:
On Wed, Jul 12, 2017 at 02:08:04PM +0800, Baolin Wang wrote:
Hi,
On 12 July 2017 at 11:52, gustavo panizzo <gfa@xxxxxxxxxxxx> wrote:
The dwc3 could not release resources when the module is built-in
because this module does not have shutdown method. This causes the USB
3.0 hub is not able to detect after warm boot.
Original patch by Brian Kim, updated and submitted upstream by gustavo
panizzo.
Also see https://bugs.debian.org/843448
Signed-off-by: Brian Kim <brian.kim@xxxxxxxxxxxxxx>
Signed-off-by: gustavo panizzo <gfa@xxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 326b302fc440..f92dfe213d89 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1259,6 +1259,38 @@ static int dwc3_probe(struct platform_device
*pdev)
return ret;
}
+static void dwc3_shutdown(struct platform_device *pdev)
+{
+ struct dwc3 *dwc = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev,
IORESOURCE_MEM, 0);
+
+ pm_runtime_get_sync(&pdev->dev);
+ /*
+ * restore res->start back to its original value so that, in case
the
+ * probe is deferred, we don't end up getting error in request
the
+ * memory region the next time probe is called.
+ */
+ res->start -= DWC3_GLOBALS_REGS_START;
+
+ dwc3_debugfs_exit(dwc);
+ dwc3_core_exit_mode(dwc);
+ dwc3_event_buffers_cleanup(dwc);
What about dwc3_event_buffers_cleanup? should I remove it from
dwc3_shutdown()?
It is already in dwc3_core_exit()
I think so. We should avoid duplicate code.
+ dwc3_free_event_buffers(dwc);
+
+ usb_phy_set_suspend(dwc->usb2_phy, 1);
+ usb_phy_set_suspend(dwc->usb3_phy, 1);
+
+ phy_power_off(dwc->usb2_generic_phy);
+ phy_power_off(dwc->usb3_generic_phy);
We've done these in dwc3_core_exit().
This is the patch after testing on a Odroid XU4, on top of linux-next
964bcc1b4f57028d56dace7d9bc5924f2eb43f36 which translates to 4.13.0-rc1-next-20170717+
I tested this patch for a week without problems with heavy USB and NIC usage.
Please consider merging it
Author: Brian Kim <brian.kim@xxxxxxxxxxxxxx>
Date: Wed Jul 12 11:26:55 2017 +0800
usb: dwc3: Fix the USB 3.0 hub detection bug after warm boot
The dwc3 could not release resources when the module is built-in
because this module does not have shutdown method. This causes the USB
3.0 hub is not able to detect after warm boot.
Original patch by Brian Kim, updated and submitted upstream by gustavo
panizzo.
Also see https://bugs.debian.org/843448
Signed-off-by: Brian Kim <brian.kim@xxxxxxxxxxxxxx>
Signed-off-by: gustavo panizzo <gfa@xxxxxxxxxxxx>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 326b302fc440..09de37d47ee7 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1259,6 +1259,32 @@ static int dwc3_probe(struct platform_device *pdev)
return ret;
}
+static void dwc3_shutdown(struct platform_device *pdev)
+{
+ struct dwc3 *dwc = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ pm_runtime_get_sync(&pdev->dev);
+ /*
+ * restore res->start back to its original value so that, in case the
+ * probe is deferred, we don't end up getting error in request the
+ * memory region the next time probe is called.
+ */
+ res->start -= DWC3_GLOBALS_REGS_START;
+
+ dwc3_debugfs_exit(dwc);
+ dwc3_core_exit_mode(dwc);
+ dwc3_event_buffers_cleanup(dwc);
+ dwc3_free_event_buffers(dwc);
+
+ dwc3_core_exit(dwc);
+ dwc3_ulpi_exit(dwc);
+
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+}
+
static int dwc3_remove(struct platform_device *pdev)
{
struct dwc3 *dwc = platform_get_drvdata(pdev);
@@ -1488,6 +1514,7 @@ MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
.remove = dwc3_remove,
+ .shutdown = dwc3_shutdown,
.driver = {
.name = "dwc3",
.of_match_table = of_match_ptr(of_dwc3_match),
Patch applies cleanly on top of c6be5a0e3cebc145127d46a58350e05d2bcf6323 from linux-next
Can you _please_ merge it?
Author: gustavo panizzo <gfa@xxxxxxxxxxxx>
Date: Wed Jul 12 11:26:55 2017 +0800
usb: dwc3: Fix the USB 3.0 hub detection bug after warm boot
The dwc3 could not release resources when the module is built-in
because this module does not have shutdown method. This causes the USB
3.0 hub is not able to detect after warm boot.
Original patch by Brian Kim, updated and submitted upstream by gustavo
panizzo.
if the original patch is from Brian, then 'Author' should be
Brian. Please fix it.
sure, i just didn't want to attribute something he didn't write
I also don't get why all of a sudden we need to implement
->shutdown(). Why is it that we never needed it before and we need it now?
Commit c499ff71ff2a281366c6ec7a904c547d806cbcd1 broke USB3 for the
Odroid XU4, this 2 patches fix the USB3
https://github.com/hardkernel/linux/commit/74b9605e5587b30912d6b6093e9d7fb06d043c33
https://github.com/hardkernel/linux/commit/2166ffd004e04a61887eb2a39f8639dc12140c58
Hardkernel didn't upstreamed them, after investigation in Debian #843448
the 2 patches were identified.
The first patch is being upstreamed by Jochen Sprickerhof
http://marc.info/?l=linux-usb&m=149945465112440&w=2
I'm taking care of the second patch
Care to bisect to find the first commit which started causing this
problem?
c499ff71ff2a281366c6ec7a904c547d806cbcd1
--
balbi
--
IRC: gfa
GPG: 0X44BB1BA79F6C6333
--
IRC: gfa
GPG: 0X44BB1BA79F6C6333
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
