On Sat, Sep 2, 2017 at 12:48 AM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote: > Add MUX_USB_* state constant defines, which can be used by USB > device/host and Type-C polarity/role/altmode mux drivers and consumers > to ensure that they agree on the meaning of the mux_control_select() > state argument. > +/* > + * Mux state values for USB muxes, used for both USB device/host role muxes > + * as well as for Type-C polarity/role/altmode muxes. > + * > + * MUX_USB_POLARITY_INV may be or-ed together with any other mux-state as > + * inverted-polarity (Type-C plugged in upside down) can happen with any > + * other mux-state. > + */ > +#define MUX_USB_POLARITY_INV BIT(0) /* Polarity inverted bit */ > +#define MUX_USB_NONE (1 << 1) /* Mux open / not connected */ > +#define MUX_USB_DEVICE (2 << 1) /* USB device mode */ > +#define MUX_USB_HOST (3 << 1) /* USB host mode */ > +#define MUX_USB_HOST_AND_DP_SRC (4 << 1) /* USB host + 2 lanes Display Port */ > +#define MUX_USB_DP_SRC (5 << 1) /* 4 lanes Display Port source */ > +#define MUX_USB_STATES (6 << 1) I would put OR'ed bits higher. Like allocate 4 (8) bits for states and start special flagst from bit 8 and so on. -- With Best Regards, Andy Shevchenko -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
