On 8/13/2017 3:04 PM, Alexandre Bailon wrote:
The way to configure the DMA mode on DA8xx is different from DSPS.
Add a new function to configure DMA mode on DA8xx and use a callback
to call the right function based on the platform.
Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
---
drivers/usb/musb/musb_cppi41.c | 40 +++++++++++++++++++++++++++++++++++++---
1 file changed, 37 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index dbff0e0a4ff5..7284ec7ecff7 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -26,6 +26,7 @@
#define MUSB_DMA_NUM_CHANNELS 15
Perhaps this needs parametrizing too? DA8xx only has 4 channels IIRC...
+#define DA8XX_USB_MODE_REG 0x10
Drop this _REG suffix please.
#define DA8XX_USB_AUTOREQ_REG 0x14
#define DA8XX_USB_TEARDOWN_REG 0x1c
[...]
@@ -413,14 +444,15 @@ static bool cppi41_configure_channel(struct dma_channel *channel,
} else {
musb_writel(musb->ctrl_base,
RNDIS_REG(cppi41_channel->port_num), 0);
- cppi41_set_dma_mode(cppi41_channel,
+ controller->set_dma_mode(cppi41_channel,
EP_MODE_DMA_TRANSPARENT);
cppi41_set_autoreq_mode(cppi41_channel,
EP_MODE_AUTOREQ_NONE);
}
} else {
/* fallback mode */
- cppi41_set_dma_mode(cppi41_channel, EP_MODE_DMA_TRANSPARENT);
+ controller->set_dma_mode(cppi41_channel,
+ EP_MODE_DMA_TRANSPARENT);
Inconsistent indentation -- you used 2 extra tabs above and 3 here.
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
