This enables the platform-roothub for the xhci-plat driver. This allows specifying a PHY for each port via devicetree. All PHYs will then be enabled/disabled by the platform-roothub driver. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Using only the top-level "phy" properties does not work here since one can only specify one "usb2-phy" and one "usb3-phy", while actually at least two "usb2-phy" have to be specified. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 7 +++++ drivers/usb/host/Kconfig | 1 + drivers/usb/host/xhci-plat.c | 35 ++++++++++++++++++++-- drivers/usb/host/xhci.h | 2 ++ 4 files changed, 43 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 2d80b60eeabe..31b4f681e9ca 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -29,6 +29,13 @@ Optional properties: - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism +sub-nodes: +- optionally there can be a node for the root-hub, see usb-roothub.txt in the + current directory +- one or more nodes with reg 1-31 for each port to which a device is connected. + See usb-device.txt in the current directory for more information. + + Example: usb@f0931000 { compatible = "generic-xhci"; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index b8b05c786b2a..3bdc49e89c0f 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -36,6 +36,7 @@ config USB_XHCI_PCI config USB_XHCI_PLATFORM tristate "Generic xHCI driver for a platform device" select USB_XHCI_RCAR if ARCH_RENESAS + select USB_PLATFORM_ROOTHUB ---help--- Adds an xHCI host driver for a generic platform device, which provides a memory space and an irq. diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index c04144b25a67..daf5bbcc310a 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -21,6 +21,7 @@ #include <linux/slab.h> #include <linux/acpi.h> +#include "platform-roothub.h" #include "xhci.h" #include "xhci-plat.h" #include "xhci-mvebu.h" @@ -285,9 +286,19 @@ static int xhci_plat_probe(struct platform_device *pdev) goto put_usb3_hcd; } + xhci->platform_roothub = platform_roothub_init(sysdev); + if (IS_ERR(xhci->platform_roothub)) { + ret = PTR_ERR(xhci->platform_roothub); + goto disable_usb_phy; + } + + ret = platform_roothub_power_on(xhci->platform_roothub); + if (ret) + goto exit_plat_roothub; + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) - goto disable_usb_phy; + goto disable_plat_roothub; if (HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; @@ -311,6 +322,12 @@ static int xhci_plat_probe(struct platform_device *pdev) dealloc_usb2_hcd: usb_remove_hcd(hcd); +disable_plat_roothub: + platform_roothub_power_off(xhci->platform_roothub); + +exit_plat_roothub: + platform_roothub_exit(xhci->platform_roothub); + disable_usb_phy: usb_phy_shutdown(hcd->usb_phy); @@ -342,6 +359,9 @@ static int xhci_plat_remove(struct platform_device *dev) usb_remove_hcd(xhci->shared_hcd); usb_phy_shutdown(hcd->usb_phy); + platform_roothub_power_off(xhci->platform_roothub); + platform_roothub_exit(xhci->platform_roothub); + usb_remove_hcd(hcd); usb_put_hcd(xhci->shared_hcd); @@ -374,7 +394,14 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk)) clk_disable_unprepare(xhci->clk); - return ret; + if (ret) + return ret; + + ret = platform_roothub_power_off(xhci->platform_roothub); + if (ret) + return ret; + + return 0; } static int __maybe_unused xhci_plat_resume(struct device *dev) @@ -386,6 +413,10 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk)) clk_prepare_enable(xhci->clk); + ret = platform_roothub_power_on(xhci->platform_roothub); + if (ret) + return ret; + ret = xhci_priv_resume_quirk(hcd); if (ret) return ret; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index e3e935291ed6..76118e254a54 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1725,6 +1725,8 @@ struct xhci_hcd { int msix_count; /* optional clock */ struct clk *clk; + /* optional platform root-hub */ + struct platform_roothub *platform_roothub; /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html