usb 4-2.3: Disable of device-initiated U1 failed.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

dmesg:
[13854.750858] usb 4-2.3: Disable of device-initiated U1 failed.
[13854.754588] usb 4-2.3: Disable of device-initiated U2 failed.

Regards,
-- 
Cristian
[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x46e with crng_init=0
[    0.000000] Linux version 4.13.0-041300rc3-generic (kernel@gloin) (gcc version 6.3.0 20170618 (Ubuntu 6.3.0-19ubuntu1)) #201707301631 SMP Sun Jul 30 20:32:49 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-041300rc3-generic root=UUID=6b614287-8ce5-49c5-b66d-e92fa9568c2b ro rootflags=subvol=@ quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c42a9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c42aa000-0x00000000c44abfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c44ac000-0x00000000d33eefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d33ef000-0x00000000daeeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031f5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000031f600000-0x000000031f7fffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C/SAMSUNG_NP1234567890, BIOS P14AAJ 04/15/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x31f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask F00000000 write-back
[    0.000000]   8 base 300000000 mask FE0000000 write-back
[    0.000000]   9 base 31F800000 mask FFF800000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff935fc00f0100]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff935fc0097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x3e724000, 0x3e724fff] PGTABLE
[    0.000000] BRK [0x3e725000, 0x3e725fff] PGTABLE
[    0.000000] BRK [0x3e726000, 0x3e726fff] PGTABLE
[    0.000000] BRK [0x3e727000, 0x3e727fff] PGTABLE
[    0.000000] BRK [0x3e728000, 0x3e728fff] PGTABLE
[    0.000000] BRK [0x3e729000, 0x3e729fff] PGTABLE
[    0.000000] BRK [0x3e72a000, 0x3e72afff] PGTABLE
[    0.000000] BRK [0x3e72b000, 0x3e72bfff] PGTABLE
[    0.000000] BRK [0x3e72c000, 0x3e72cfff] PGTABLE
[    0.000000] BRK [0x3e72d000, 0x3e72dfff] PGTABLE
[    0.000000] BRK [0x3e72e000, 0x3e72efff] PGTABLE
[    0.000000] BRK [0x3e72f000, 0x3e72ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3223d000-0x35115fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 0x00000000DAFFE170 000094 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: FACP 0x00000000DAFEE000 00010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DAFF1000 0092DA (v02 SECCSD IVB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAF7B000 000040
[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000DAFF0000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 0x00000000DAFED000 000038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DAFEC000 000098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DAFEB000 00003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: FPDT 0x00000000DAFEA000 000054 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000DAFE9000 0007D7 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFE8000 000AD0 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000DAFE7000 00003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x00000000DAF78000 000055 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFE5000 00022E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000031f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x31f5cd000-0x31f5f7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000031f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000c42a9fff]
[    0.000000]   node   0: [mem 0x00000000c44ac000-0x00000000d33eefff]
[    0.000000]   node   0: [mem 0x00000000dafff000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000031f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031f5fffff]
[    0.000000] On node 0 totalpages: 3089290
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13432 pages used for memmap
[    0.000000]   DMA32 zone: 859630 pages, LIFO batch:31
[    0.000000]   Normal zone: 34776 pages used for memmap
[    0.000000]   Normal zone: 2225664 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc42aa000-0xc44abfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd33ef000-0xdaeeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 39 pages/cpu @ffff9362df200000 s119640 r8192 d31912 u262144
[    0.000000] pcpu-alloc: s119640 r8192 d31912 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3040862
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-041300rc3-generic root=UUID=6b614287-8ce5-49c5-b66d-e92fa9568c2b ro rootflags=subvol=@ quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12022792K/12357160K available (9249K kernel code, 2480K rwdata, 4044K rodata, 2320K init, 2388K bss, 334368K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 37524 entries in 147 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1496.541 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.08 BogoMIPS (lpj=5986164)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.013001] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.013042] Security Framework initialized
[    0.013044] Yama: becoming mindful.
[    0.013069] AppArmor: AppArmor initialized
[    0.016746] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.018573] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.018648] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018705] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018996] CPU: Physical Processor ID: 0
[    0.018997] CPU: Processor Core ID: 0
[    0.019004] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.019004] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.019010] mce: CPU supports 7 MCE banks
[    0.019022] CPU0: Thermal monitoring enabled (TM1)
[    0.019034] process: using mwait in idle threads
[    0.019038] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.019039] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.019206] Freeing SMP alternatives memory: 36K
[    0.022589] smpboot: Max logical packages: 4
[    0.022670] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.023156] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062858] TSC deadline timer enabled
[    0.062862] smpboot: CPU0: Intel(R) Core(TM) i3-2377M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.062957] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.062990] ... version:                3
[    0.062991] ... bit width:              48
[    0.062992] ... generic registers:      4
[    0.062993] ... value mask:             0000ffffffffffff
[    0.062994] ... max period:             00007fffffffffff
[    0.062995] ... fixed-purpose events:   3
[    0.062996] ... event mask:             000000070000000f
[    0.063048] Hierarchical SRCU implementation.
[    0.064000] smp: Bringing up secondary CPUs ...
[    0.064000] x86: Booting SMP configuration:
[    0.064000] .... node  #0, CPUs:      #1
[    0.142042] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.142042]  #2 #3
[    0.302034] smp: Brought up 1 node, 4 CPUs
[    0.302034] smpboot: Total of 4 processors activated (11976.56 BogoMIPS)
[    0.304584] devtmpfs: initialized
[    0.304584] x86/mm: Memory block size: 128MB
[    0.305572] evm: security.selinux
[    0.305573] evm: security.SMACK64
[    0.305574] evm: security.SMACK64EXEC
[    0.305575] evm: security.SMACK64TRANSMUTE
[    0.305576] evm: security.SMACK64MMAP
[    0.305576] evm: security.ima
[    0.305577] evm: security.capability
[    0.305599] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes)
[    0.305599] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.305599] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.305599] pinctrl core: initialized pinctrl subsystem
[    0.305599] RTC time: 16:13:33, date: 08/04/17
[    0.305599] NET: Registered protocol family 16
[    0.305599] cpuidle: using governor ladder
[    0.305599] cpuidle: using governor menu
[    0.305599] PCCT header not found.
[    0.305599] ACPI: bus type PCI registered
[    0.305599] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.305599] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.305599] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.305599] PCI: Using configuration type 1 for base access
[    0.305599] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.309465] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.309465] ACPI: Added _OSI(Module Device)
[    0.309465] ACPI: Added _OSI(Processor Device)
[    0.309465] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.309465] ACPI: Added _OSI(Processor Aggregator Device)
[    0.309465] ACPI: Executed 1 blocks of module-level executable AML code
[    0.315238] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.316549] ACPI: Dynamic OEM Table Load:
[    0.316562] ACPI: SSDT 0xFFFF9362D0A8C000 000784 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.316701] ACPI: Dynamic OEM Table Load:
[    0.316701] ACPI: SSDT 0xFFFF9362D09FF000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.316707] ACPI: Dynamic OEM Table Load:
[    0.316707] ACPI: SSDT 0xFFFF9362D0A53A00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.316949] ACPI: EC: EC started
[    0.316950] ACPI: EC: interrupt blocked
[    0.320674] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.320677] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.320679] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.320680] ACPI: Interpreter enabled
[    0.320716] ACPI: (supports S0 S1 S3 S4 S5)
[    0.320718] ACPI: Using IOAPIC for interrupt routing
[    0.320754] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.331520] ACPI: Power Resource [FN00] (off)
[    0.331648] ACPI: Power Resource [FN01] (off)
[    0.331770] ACPI: Power Resource [FN02] (off)
[    0.331890] ACPI: Power Resource [FN03] (off)
[    0.332016] ACPI: Power Resource [FN04] (off)
[    0.332838] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.332845] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.333038] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.333642] PCI host bridge to bus 0000:00
[    0.333646] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.333648] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.333650] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.333652] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.333654] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.333665] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.333801] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.333816] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.333824] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.333830] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.333995] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.334032] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[    0.334133] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.334250] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.334284] pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit]
[    0.334382] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.334512] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.334541] pci 0000:00:1a.0: reg 0x10: [mem 0xf061a000-0xf061a3ff]
[    0.334654] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.334770] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.334806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[    0.334917] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.335041] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.335162] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.335289] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.335404] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.335536] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.335568] pci 0000:00:1d.0: reg 0x10: [mem 0xf0619000-0xf06193ff]
[    0.335678] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.335792] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.336046] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.336075] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.336088] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.336100] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.336112] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.336122] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.336134] pci 0000:00:1f.2: reg 0x24: [mem 0xf0618000-0xf06187ff]
[    0.336198] pci 0000:00:1f.2: PME# supported from D3hot
[    0.336307] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.336339] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit]
[    0.336369] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.336601] pci 0000:01:00.0: [8086:088e] type 00 class 0x028000
[    0.336678] pci 0000:01:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
[    0.336942] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.348057] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.348078] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.348240] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.348375] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.348504] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.348584] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.349008] pci 0000:02:00.0: supports D1 D2
[    0.349010] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.360103] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.360109] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.360120] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.361225] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.361305] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.361382] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.361458] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.361533] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.361608] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.361683] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.361758] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.362576] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.362660] ACPI: EC: interrupt unblocked
[    0.362668] ACPI: EC: event unblocked
[    0.362676] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.362678] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.362773] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.362773] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.362773] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.362773] vgaarb: loaded
[    0.362773] SCSI subsystem initialized
[    0.362773] libata version 3.00 loaded.
[    0.362773] ACPI: bus type USB registered
[    0.362773] usbcore: registered new interface driver usbfs
[    0.362773] usbcore: registered new interface driver hub
[    0.362773] usbcore: registered new device driver usb
[    0.362773] EDAC MC: Ver: 3.0.0
[    0.362773] PCI: Using ACPI for IRQ routing
[    0.365443] PCI: pci_cache_line_size set to 64 bytes
[    0.365509] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.365511] e820: reserve RAM buffer [mem 0xc42aa000-0xc7ffffff]
[    0.365512] e820: reserve RAM buffer [mem 0xd33ef000-0xd3ffffff]
[    0.365513] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.365515] e820: reserve RAM buffer [mem 0x31f600000-0x31fffffff]
[    0.365636] NetLabel: Initializing
[    0.365637] NetLabel:  domain hash size = 128
[    0.365637] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.365664] NetLabel:  unlabeled traffic allowed by default
[    0.365688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.365688] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.366129] clocksource: Switched to clocksource hpet
[    0.379089] VFS: Disk quotas dquot_6.6.0
[    0.379124] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.379253] AppArmor: AppArmor Filesystem Enabled
[    0.379321] pnp: PnP ACPI init
[    0.379817] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.379820] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.379822] system 00:00: [io  0x5000-0x5003] has been reserved
[    0.379824] system 00:00: [io  0xffff] has been reserved
[    0.379826] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.379828] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.379830] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.379832] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.379834] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.379837] system 00:00: [io  0x5000-0x500f] could not be reserved
[    0.379843] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.379881] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.379954] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.379958] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.380000] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.380081] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.380290] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.380293] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.380295] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.380297] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.380299] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.380303] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.380306] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.380308] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.380310] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.380313] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.380315] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved
[    0.380319] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.380892] pnp: PnP ACPI: found 6 devices
[    0.388335] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.388372] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.388382] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.388394] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.388398] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.388410] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.388421] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.388423] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.388425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.388427] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[    0.388429] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.388431] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.388433] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.388565] NET: Registered protocol family 2
[    0.388836] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.389195] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.389389] TCP: Hash tables configured (established 131072 bind 65536)
[    0.389457] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.389535] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.389659] NET: Registered protocol family 1
[    0.389679] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.390449] PCI: CLS 64 bytes, default 64
[    0.390512] Unpacking initramfs...
[    1.630010] Freeing initrd memory: 47972K
[    1.630034] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.630038] software IO TLB [mem 0xcf3ef000-0xd33ef000] (64MB) mapped at [ffff93608f3ef000-ffff9360933eefff]
[    1.630331] Scanning for low memory corruption every 60 seconds
[    1.630797] audit: initializing netlink subsys (disabled)
[    1.630867] audit: type=2000 audit(1501863213.630:1): state=initialized audit_enabled=0 res=1
[    1.631388] Initialise system trusted keyrings
[    1.631399] Key type blacklist registered
[    1.631452] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    1.633233] zbud: loaded
[    1.633801] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.634014] fuse init (API version 7.26)
[    1.635837] Key type asymmetric registered
[    1.635839] Asymmetric key parser 'x509' registered
[    1.635891] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.635939] io scheduler noop registered
[    1.635940] io scheduler deadline registered
[    1.635979] io scheduler cfq registered (default)
[    1.636599] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.636600] vesafb: scrolling: redraw
[    1.636602] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.636617] vesafb: framebuffer at 0xe0000000, mapped to 0xffffb6eec2000000, using 4160k, total 4160k
[    1.747363] Console: switching to colour frame buffer device 170x48
[    1.857693] fb0: VESA VGA frame buffer device
[    1.857730] intel_idle: MWAIT substates: 0x21120
[    1.857732] intel_idle: v0.4.1 model 0x2A
[    1.857937] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.858242] ACPI: AC Adapter [ADP1] (on-line)
[    1.858357] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.858389] ACPI: Lid Switch [LID0]
[    1.858437] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.858472] ACPI: Power Button [PWRB]
[    1.858523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.858550] ACPI: Power Button [PWRF]
[    1.859785] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.860164] thermal LNXTHERM:00: registered as thermal_zone0
[    1.860166] ACPI: Thermal Zone [TZ00] (55 C)
[    1.860503] thermal LNXTHERM:01: registered as thermal_zone1
[    1.860504] ACPI: Thermal Zone [TZ01] (30 C)
[    1.860571] GHES: HEST is not enabled!
[    1.860686] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.860773] ACPI: Battery Slot [BAT1] (battery absent)
[    1.862857] Linux agpgart interface v0.103
[    1.865087] loop: module loaded
[    1.865308] libphy: Fixed MDIO Bus: probed
[    1.865310] tun: Universal TUN/TAP device driver, 1.6
[    1.865360] PPP generic driver version 2.4.2
[    1.865420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.865423] ehci-pci: EHCI PCI platform driver
[    1.865590] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.865598] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.865616] ehci-pci 0000:00:1a.0: debug port 2
[    1.869525] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.869546] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061a000
[    1.884148] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.884240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.884242] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.884244] usb usb1: Product: EHCI Host Controller
[    1.884246] usb usb1: Manufacturer: Linux 4.13.0-041300rc3-generic ehci_hcd
[    1.884248] usb usb1: SerialNumber: 0000:00:1a.0
[    1.884460] hub 1-0:1.0: USB hub found
[    1.884469] hub 1-0:1.0: 3 ports detected
[    1.884812] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.884820] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.884836] ehci-pci 0000:00:1d.0: debug port 2
[    1.888750] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.888769] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0619000
[    1.904126] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.904221] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.904223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.904225] usb usb2: Product: EHCI Host Controller
[    1.904227] usb usb2: Manufacturer: Linux 4.13.0-041300rc3-generic ehci_hcd
[    1.904229] usb usb2: SerialNumber: 0000:00:1d.0
[    1.904434] hub 2-0:1.0: USB hub found
[    1.904443] hub 2-0:1.0: 3 ports detected
[    1.904604] ehci-platform: EHCI generic platform driver
[    1.904628] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.904632] ohci-pci: OHCI PCI platform driver
[    1.904644] ohci-platform: OHCI generic platform driver
[    1.904653] uhci_hcd: USB Universal Host Controller Interface driver
[    1.904881] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.904889] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.905985] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.905993] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.906117] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.906119] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.906121] usb usb3: Product: xHCI Host Controller
[    1.906123] usb usb3: Manufacturer: Linux 4.13.0-041300rc3-generic xhci-hcd
[    1.906124] usb usb3: SerialNumber: 0000:00:14.0
[    1.906269] hub 3-0:1.0: USB hub found
[    1.906280] hub 3-0:1.0: 4 ports detected
[    1.906715] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.906720] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.906792] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.906794] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.906796] usb usb4: Product: xHCI Host Controller
[    1.906797] usb usb4: Manufacturer: Linux 4.13.0-041300rc3-generic xhci-hcd
[    1.906799] usb usb4: SerialNumber: 0000:00:14.0
[    1.906946] hub 4-0:1.0: USB hub found
[    1.906958] hub 4-0:1.0: 4 ports detected
[    1.907430] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    1.913542] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.913549] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.913734] mousedev: PS/2 mouse device common for all mice
[    1.914150] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.914180] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.914189] i2c /dev entries driver
[    1.914257] device-mapper: uevent: version 1.0.3
[    1.914351] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@xxxxxxxxxx
[    1.914358] intel_pstate: Intel P-state driver initializing
[    1.914668] ledtrig-cpu: registered to indicate activity on CPUs
[    1.914710] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.915308] NET: Registered protocol family 10
[    1.920805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.921169] Segment Routing with IPv6
[    1.921200] NET: Registered protocol family 17
[    1.921212] Key type dns_resolver registered
[    1.921675] RAS: Correctable Errors collector initialized.
[    1.921712] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    1.921792] microcode: Microcode Update Driver: v2.2.
[    1.921811] sched_clock: Marking stable (1921786782, 0)->(1926539768, -4752986)
[    1.922089] registered taskstats version 1
[    1.922099] Loading compiled-in X.509 certificates
[    1.926148] Loaded X.509 cert 'Build time autogenerated kernel key: e63ff2b738f07c5700289c3fffe33551c40ff96f'
[    1.926186] zswap: loaded using pool lzo/zbud
[    1.929617] Key type big_key registered
[    1.929627] Key type trusted registered
[    1.931936] Key type encrypted registered
[    1.931942] AppArmor: AppArmor sha1 policy hashing enabled
[    1.931946] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.931980] evm: HMAC attrs: 0x1
[    1.932270]   Magic number: 13:177:236
[    1.932310] acpi-fan PNP0C0B:01: hash matches
[    1.932318] acpi PNP0C0B:01: hash matches
[    1.932417] rtc_cmos 00:01: setting system clock to 2017-08-04 16:13:34 UTC (1501863214)
[    1.932498] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.932499] EDD information not available.
[    1.932573] PM: Hibernation image not present or could not be loaded.
[    1.936841] Freeing unused kernel memory: 2320K
[    1.936843] Write protecting the kernel read-only data: 14336k
[    1.937439] Freeing unused kernel memory: 980K
[    1.937705] Freeing unused kernel memory: 52K
[    1.941786] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.041228] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.041241] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.041928] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffb6eec18bd000, e8:03:9a:0f:c4:4f, XID 0c900800 IRQ 25
[    2.041931] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.068657] ahci 0000:00:1f.2: version 3.0
[    2.069021] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    2.069027] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.081257] scsi host0: ahci
[    2.081508] scsi host1: ahci
[    2.081730] scsi host2: ahci
[    2.081946] scsi host3: ahci
[    2.084104] scsi host4: ahci
[    2.084343] scsi host5: ahci
[    2.084490] ata1: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618100 irq 26
[    2.084495] ata2: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618180 irq 26
[    2.084497] ata3: DUMMY
[    2.084499] ata4: DUMMY
[    2.084500] ata5: DUMMY
[    2.084502] ata6: DUMMY
[    2.094606] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    2.133755] [drm] Memory usable by graphics device = 2048M
[    2.133758] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    2.133760] fb: switching to inteldrmfb from VESA VGA
[    2.133792] Console: switching to colour dummy device 80x25
[    2.134006] [drm] Replacing VGA console driver
[    2.140209] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.140210] [drm] Driver supports precise vblank timestamp query.
[    2.143635] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.154456] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    2.155575] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.155943] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.189276] fbcon: inteldrmfb (fb0) is primary device
[    2.216127] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.232120] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.232148] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    2.364865] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.364868] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.365324] hub 1-1:1.0: USB hub found
[    2.365516] hub 1-1:1.0: 6 ports detected
[    2.380864] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.380866] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.381292] hub 2-1:1.0: USB hub found
[    2.381391] hub 2-1:1.0: 6 ports detected
[    2.399537] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.399584] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.400111] ata2.00: ATA-9: SanDisk SSD i100 24GB, 11.50.04, max UDMA/133
[    2.400115] ata2.00: 46905264 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.400948] ata2.00: Security Log not supported
[    2.401325] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    2.401327] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.401704] ata1.00: ATA Identify Device Log not supported
[    2.401706] ata1.00: Security Log not supported
[    2.401884] ata2.00: Security Log not supported
[    2.401894] ata2.00: configured for UDMA/133
[    2.404010] ata1.00: ATA Identify Device Log not supported
[    2.404012] ata1.00: Security Log not supported
[    2.404021] ata1.00: configured for UDMA/133
[    2.404218] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5
[    2.452366] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.452371] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.452384] sd 0:0:0:0: [sda] Write Protect is off
[    2.452388] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.452390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.452408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.452594] scsi 1:0:0:0: Direct-Access     ATA      SanDisk SSD i100 0.04 PQ: 0 ANSI: 5
[    2.492373] sd 1:0:0:0: [sdb] 46905264 512-byte logical blocks: (24.0 GB/22.4 GiB)
[    2.492383] sd 1:0:0:0: [sdb] Write Protect is off
[    2.492387] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.492405] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.492406] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.493130]  sdb: sdb1
[    2.493527] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.533375] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.543285]  sda: sda2 sda4 < sda5 sda6 sda7 sda8 >
[    2.544404] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.607755] usb 3-1: New USB device found, idVendor=047f, idProduct=c022
[    2.607757] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.607760] usb 3-1: Product: Plantronics C310
[    2.607761] usb 3-1: Manufacturer: Plantronics
[    2.607763] usb 3-1: SerialNumber: 32A26B7A3023464D9CF5091CF1780483
[    2.614156] hidraw: raw HID events driver (C) Jiri Kosina
[    2.636433] usb 4-2: New USB device found, idVendor=2109, idProduct=0813
[    2.636436] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.636437] usb 4-2: Product: USB3.0 Hub             
[    2.636439] usb 4-2: Manufacturer: VIA Labs, Inc.         
[    2.638377] hub 4-2:1.0: USB hub found
[    2.638610] hub 4-2:1.0: 4 ports detected
[    2.652080] tsc: Refined TSC clocksource calibration: 1496.600 MHz
[    2.652102] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159296d3708, max_idle_ns: 440795218047 ns
[    2.652116] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    2.668122] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    2.752133] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[    2.781144] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
[    2.781147] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.844567] Console: switching to colour frame buffer device 170x48
[    2.850268] usbcore: registered new interface driver usbhid
[    2.850269] usbhid: USB HID core driver
[    2.853393] input: Plantronics Plantronics C310 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.3/0003:047F:C022.0001/input/input7
[    2.864872] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.879528] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1035
[    2.879531] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.879533] usb 1-1.4: Product: WebCam SC-13HDL12131N
[    2.879535] usb 1-1.4: Manufacturer: Generic
[    2.879537] usb 1-1.4: SerialNumber: 200901010001
[    2.893871] usb 3-2: New USB device found, idVendor=2109, idProduct=2813
[    2.893875] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.893877] usb 3-2: Product: USB2.0 Hub             
[    2.893879] usb 3-2: Manufacturer: VIA Labs, Inc.         
[    2.894863] hub 3-2:1.0: USB hub found
[    2.895705] hub 3-2:1.0: 4 ports detected
[    2.912351] plantronics 0003:047F:C022.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Plantronics Plantronics C310] on usb-0000:00:14.0-1/input3
[    2.946111] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[    2.960898] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[    2.976193] psmouse serio1: elantech: Elan sample query result 03, 3f, 86
[    3.049475] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    3.252118] usb 3-2.4: new low-speed USB device number 4 using xhci_hcd
[    3.408869] usb 3-2.4: New USB device found, idVendor=046d, idProduct=c077
[    3.408876] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.408879] usb 3-2.4: Product: USB Optical Mouse
[    3.408883] usb 3-2.4: Manufacturer: Logitech
[    3.414276] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.0/0003:046D:C077.0002/input/input8
[    3.414504] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2.4/input0
[    3.676317] clocksource: Switched to clocksource tsc
[    4.084038] raid6: sse2x1   gen()  4008 MB/s
[    4.152046] raid6: sse2x1   xor()  3113 MB/s
[    4.220045] raid6: sse2x2   gen()  4980 MB/s
[    4.288036] raid6: sse2x2   xor()  3624 MB/s
[    4.356040] raid6: sse2x4   gen()  5813 MB/s
[    4.424047] raid6: sse2x4   xor()  4455 MB/s
[    4.424049] raid6: using algorithm sse2x4 gen() 5813 MB/s
[    4.424050] raid6: .... xor() 4455 MB/s, rmw enabled
[    4.424051] raid6: using ssse3x2 recovery algorithm
[    4.426106] xor: automatically using best checksumming function   avx       
[    4.455457] Btrfs loaded, crc32c=crc32c-intel
[    5.105115] BTRFS: device fsid 6b614287-8ce5-49c5-b66d-e92fa9568c2b devid 1 transid 35681 /dev/sdb1
[    5.138063] BTRFS info (device sdb1): disk space caching is enabled
[    5.138066] BTRFS info (device sdb1): has skinny extents
[    5.153820] BTRFS info (device sdb1): detected SSD devices, enabling SSD mode
[    5.379537] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.385615] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[    5.385818] systemd[1]: Detected architecture x86-64.
[    5.386596] systemd[1]: Set hostname to <caravena-530U3C-530U4C>.
[    5.487133] systemd[1]: Listening on Journal Audit Socket.
[    5.487272] systemd[1]: Listening on Journal Socket.
[    5.487349] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.487577] systemd[1]: Created slice User and Session Slice.
[    5.487605] systemd[1]: Reached target User and Group Name Lookups.
[    5.487791] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.487978] systemd[1]: Created slice System Slice.
[    5.543850] lp: driver loaded but no devices found
[    5.552648] ppdev: user-space parallel port driver
[    5.666597] BTRFS info (device sdb1): disk space caching is enabled
[    5.689876] systemd-journald[281]: Received request to flush runtime journal from PID 1
[    5.926856] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.927332] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[    5.927343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.927348] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    5.927356] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.927358] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    5.927365] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.927367] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    5.927374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.927375] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.025172] media: Linux media interface: v0.10
[    6.043938] Intel(R) Wireless WiFi driver for Linux
[    6.043940] Copyright(c) 2003- 2015 Intel Corporation
[    6.044190] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.049744] Linux video capture interface: v2.00
[    6.084017] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    6.088689] Bluetooth: Core ver 2.22
[    6.088716] NET: Registered protocol family 31
[    6.088718] Bluetooth: HCI device and connection manager initialized
[    6.088724] Bluetooth: HCI socket layer initialized
[    6.088729] Bluetooth: L2CAP socket layer initialized
[    6.088739] Bluetooth: SCO socket layer initialized
[    6.170919] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    6.170923] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    6.170926] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    6.170930] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[    6.177767] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL12131N (2232:1035)
[    6.192179] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[    6.192185] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[    6.192188] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[    6.192362] input: WebCam SC-13HDL12131N: WebCam S as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9
[    6.192633] usbcore: registered new interface driver uvcvideo
[    6.192635] USB Video Class driver (1.1.1)
[    6.192876] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    6.192879] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    6.192881] RAPL PMU: hw unit of domain package 2^-16 Joules
[    6.192883] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    6.227198] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    6.241546] usbcore: registered new interface driver btusb
[    6.313753] samsung_laptop: detected SABI interface: SwSmi@
[    6.413871] intel_rapl: Found RAPL domain package
[    6.413873] intel_rapl: Found RAPL domain core
[    6.413874] intel_rapl: Found RAPL domain uncore
[    6.413882] intel_rapl: RAPL package 0 domain package locked by BIOS
[    6.443183] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.490705] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.490710] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.490714] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    6.490717] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.490720] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.490723] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[    6.490727] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    6.512929] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[    6.526071] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.526203] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    6.526326] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    6.561448] usb 3-1: 2:1: cannot get freq at ep 0x1
[    6.573654] usb 3-1: Warning! Unlikely big volume range (=10361), cval->res is probably wrong.
[    6.573659] usb 3-1: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/10361/1
[    6.580987] usbcore: registered new interface driver snd-usb-audio
[    6.754851] usb 2-1.5: USB disconnect, device number 3
[    7.294037] Adding 3999740k swap on /dev/sda5.  Priority:-1 extents:1 across:3999740k FS
[    8.942672] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    9.936289] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   10.037630] audit: type=1400 audit(1501863222.605:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=722 comm="apparmor_parser"
[   10.037638] audit: type=1400 audit(1501863222.605:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=722 comm="apparmor_parser"
[   10.041637] audit: type=1400 audit(1501863222.609:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=723 comm="apparmor_parser"
[   10.044718] audit: type=1400 audit(1501863222.612:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=719 comm="apparmor_parser"
[   10.044725] audit: type=1400 audit(1501863222.612:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"
[   10.044730] audit: type=1400 audit(1501863222.612:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=719 comm="apparmor_parser"
[   10.044735] audit: type=1400 audit(1501863222.612:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
[   10.045494] audit: type=1400 audit(1501863222.613:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=725 comm="apparmor_parser"
[   10.049670] audit: type=1400 audit(1501863222.617:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=724 comm="apparmor_parser"
[   10.049677] audit: type=1400 audit(1501863222.617:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=724 comm="apparmor_parser"
[   10.365719] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.365723] Bluetooth: BNEP filters: protocol multicast
[   10.365729] Bluetooth: BNEP socket layer initialized
[   10.830193] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   10.951946] r8169 0000:02:00.0 enp2s0: link down
[   10.952026] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   10.962794] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   10.986900] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   11.290243] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   11.373521] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   11.399217] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   11.702233] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   11.784784] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   11.895279] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   12.749860] usb 3-1: 1:1: cannot get freq at ep 0x81
[   12.752002] usb 3-1: 2:1: cannot get freq at ep 0x1
[   15.357717] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   15.665706] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   15.749050] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   15.878300] wlp1s0: authenticate with 4c:fa:ca:57:14:f4
[   15.881198] wlp1s0: send auth to 4c:fa:ca:57:14:f4 (try 1/3)
[   15.949772] wlp1s0: authenticated
[   15.950049] wlp1s0: waiting for beacon from 4c:fa:ca:57:14:f4
[   16.052056] wlp1s0: associate with 4c:fa:ca:57:14:f4 (try 1/3)
[   16.063691] wlp1s0: RX AssocResp from 4c:fa:ca:57:14:f4 (capab=0x1411 status=0 aid=4)
[   16.082281] wlp1s0: associated
[   16.082366] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   16.153812] wlp1s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 4c:fa:ca:57:14:f4
[   29.410905] random: crng init done
[   30.887911] rfkill: input handler disabled
[  118.451556] r8169 0000:02:00.0: invalid large VPD tag 7f at offset 0
[  131.318904] usb 4-2.3: new SuperSpeed USB device number 3 using xhci_hcd
[  131.347895] usb 4-2.3: New USB device found, idVendor=090c, idProduct=1000
[  131.347902] usb 4-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  131.347906] usb 4-2.3: Product: USB DISK
[  131.347909] usb 4-2.3: Manufacturer: SMI Corporation
[  131.377150] usb-storage 4-2.3:1.0: USB Mass Storage device detected
[  131.377337] scsi host6: usb-storage 4-2.3:1.0
[  131.377510] usbcore: registered new interface driver usb-storage
[  131.381193] usbcore: registered new interface driver uas
[  132.593456] scsi 6:0:0:0: Direct-Access     SMI      USB DISK         1100 PQ: 0 ANSI: 6
[  132.614987] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  132.615417] sd 6:0:0:0: [sdc] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[  132.615943] sd 6:0:0:0: [sdc] Write Protect is off
[  132.615951] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[  132.616470] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  132.620573]  sdc: sdc1
[  132.622775] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3187.876216] perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 4343.740020] perf: interrupt took too long (3191 > 3158), lowering kernel.perf_event_max_sample_rate to 62500
[ 4771.592294] kauditd_printk_skb: 8 callbacks suppressed
[ 4771.592298] audit: type=1400 audit(1501867984.498:20): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/flatpak/exports/share/icons/hicolor/16x16/apps/" pid=6399 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4771.594671] audit: type=1400 audit(1501867984.500:21): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/flatpak/exports/share/icons/hicolor/24x24/apps/" pid=6399 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4771.595798] audit: type=1400 audit(1501867984.501:22): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/flatpak/exports/share/icons/hicolor/32x32/apps/" pid=6399 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4771.597833] audit: type=1400 audit(1501867984.503:23): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/flatpak/exports/share/icons/hicolor/48x48/apps/" pid=6399 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4771.602424] audit: type=1400 audit(1501867984.508:24): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/flatpak/exports/share/icons/hicolor/256x256/apps/" pid=6399 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4771.603898] audit: type=1400 audit(1501867984.509:25): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/flatpak/exports/share/icons/hicolor/512x512/apps/" pid=6399 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4771.605938] audit: type=1400 audit(1501867984.511:26): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/flatpak/exports/share/icons/hicolor/symbolic/apps/" pid=6399 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4771.606849] audit: type=1400 audit(1501867984.512:27): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/flatpak/exports/share/icons/" pid=6399 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 5619.626941] perf: interrupt took too long (3989 > 3988), lowering kernel.perf_event_max_sample_rate to 50000
[ 7823.024117] perf: interrupt took too long (5008 > 4986), lowering kernel.perf_event_max_sample_rate to 39750
[ 9770.755336] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
[ 9770.911967] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
[ 9770.911974] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9771.097194] Bluetooth: RFCOMM TTY layer initialized
[ 9771.097211] Bluetooth: RFCOMM socket layer initialized
[ 9771.097228] Bluetooth: RFCOMM ver 1.11
[11761.420003] perf: interrupt took too long (6279 > 6260), lowering kernel.perf_event_max_sample_rate to 31750
[13854.750858] usb 4-2.3: Disable of device-initiated U1 failed.
[13854.754588] usb 4-2.3: Disable of device-initiated U2 failed.
[13855.438280] usb 4-2.3: USB disconnect, device number 3
[13857.147213] usb 3-2.4: USB disconnect, device number 4
[13858.349034] usb 3-2: USB disconnect, device number 3
[13858.492086] usb 4-2: USB disconnect, device number 2
[13904.621007] usb 3-4: new low-speed USB device number 5 using xhci_hcd
[13904.764604] usb 3-4: New USB device found, idVendor=046d, idProduct=c077
[13904.764611] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[13904.764615] usb 3-4: Product: USB Optical Mouse
[13904.764618] usb 3-4: Manufacturer: Logitech
[13904.767788] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C077.0003/input/input13
[13904.825591] hid-generic 0003:046D:C077.0003: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4/input0
[13939.393783] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd
[13939.414950] usb 4-2: New USB device found, idVendor=13fd, idProduct=3940
[13939.414957] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13939.414961] usb 4-2: Product: BD-MLT UJ240AS  
[13939.414964] usb 4-2: Manufacturer: MATSHITA
[13939.414968] usb 4-2: SerialNumber: 574A3131202032303534393820202020
[13939.415776] usb-storage 4-2:1.0: USB Mass Storage device detected
[13939.415948] usb-storage 4-2:1.0: Quirks match for vid 13fd pid 3940: 2000000
[13939.417257] scsi host6: usb-storage 4-2:1.0
[13940.447258] scsi 6:0:0:0: CD-ROM            MATSHITA BD-MLT UJ240AS   1.12 PQ: 0 ANSI: 0
[13940.473449] sr 6:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[13940.473458] cdrom: Uniform CD-ROM driver Revision: 3.20
[13940.476223] sr 6:0:0:0: Attached scsi CD-ROM sr0
[13940.476476] sr 6:0:0:0: Attached scsi generic sg2 type 5
[14103.308776] capability: warning: `growisofs' uses 32-bit capabilities (legacy support in use)

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux