[PATCH] dma-mapping: skip USB devices when configuring DMA during probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



USB devices use the DMA mask and offset of the controller, which have
already been setup when a device is probed. Note that modifying the mask
of a USB device would change the mask for the controller (and all
devices on the bus) as the mask is literally shared.

Since commit 2bf698671205 ("USB: of: fix root-hub device-tree node
handling"), of_dma_configure() would be called also for root hubs, which
use the device node of the controller. A separate bug that makes
of_dma_configure() generate a 30-bit DMA mask from the RPI3's
"dma-ranges" would thus set a broken mask also for the controller. This
in turn leads to USB devices failing to enumerate when control transfers
fail:

	dwc2 3f980000.usb: Cannot do DMA to address 0x000000003a166a00

Fix this, and similar future problems, by simply skipping USB devices
when dma_configure() is called during probe.

Fixes: 09515ef5ddad ("of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices")
Cc: stable <stable@xxxxxxxxxxxxxxx>	# 4.12
Cc: Robin Murphy <robin.murphy@xxxxxxx>
Cc: Sricharan R <sricharan@xxxxxxxxxxxxxx>
Cc: Stefan Wahren <stefan.wahren@xxxxxxxx>
Reported-by: Hans Verkuil <hverkuil@xxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
 drivers/base/dma-mapping.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
index b555ff9dd8fc..c6cde7e79599 100644
--- a/drivers/base/dma-mapping.c
+++ b/drivers/base/dma-mapping.c
@@ -13,6 +13,7 @@
 #include <linux/gfp.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
+#include <linux/usb.h>
 #include <linux/vmalloc.h>
 
 /*
@@ -345,6 +346,10 @@ int dma_configure(struct device *dev)
 	enum dev_dma_attr attr;
 	int ret = 0;
 
+	/* USB devices share the controller's mask. */
+	if (dev->bus == &usb_bus_type)
+		return 0;
+
 	if (dev_is_pci(dev)) {
 		bridge = pci_get_host_bridge_device(to_pci_dev(dev));
 		dma_dev = bridge;
@@ -369,6 +374,9 @@ int dma_configure(struct device *dev)
 
 void dma_deconfigure(struct device *dev)
 {
+	if (dev->bus == &usb_bus_type)
+		return;
+
 	of_dma_deconfigure(dev);
 	acpi_dma_deconfigure(dev);
 }
-- 
2.13.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux