Hello, dmesg: [ 6.580403] usb 3-1: 2:1: cannot get freq at ep 0x1 [...] [ 6.630781] usb 3-1: Warning! Unlikely big volume range (=10361), cval->res is probably wrong. [ 6.630787] usb 3-1: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/10361/1 [...] [ 12.291407] usb 3-1: 2:1: cannot get freq at ep 0x1 [ 12.298306] usb 3-1: 1:1: cannot get freq at ep 0x81 Regards, -- Cristian
[ 0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Linux version 4.12.4-041204-generic (kernel@tangerine) (gcc version 6.3.0 20170618 (Ubuntu 6.3.0-19ubuntu1) ) #201707271932 SMP Thu Jul 27 23:33:55 UTC 2017 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.12.4-041204-generic root=UUID=6b614287-8ce5-49c5-b66d-e92fa9568c2b ro rootflags=subvol=@ quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c42a9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c42aa000-0x00000000c44abfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c44ac000-0x00000000d33eefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d33ef000-0x00000000daeeefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031f5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000031f600000-0x000000031f7fffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C/SAMSUNG_NP1234567890, BIOS P14AAJ 04/15/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x31f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask F00000000 write-back [ 0.000000] 8 base 300000000 mask FE0000000 write-back [ 0.000000] 9 base 31F800000 mask FFF800000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff9757400f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff975740097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x207f21000, 0x207f21fff] PGTABLE [ 0.000000] BRK [0x207f22000, 0x207f22fff] PGTABLE [ 0.000000] BRK [0x207f23000, 0x207f23fff] PGTABLE [ 0.000000] BRK [0x207f24000, 0x207f24fff] PGTABLE [ 0.000000] BRK [0x207f25000, 0x207f25fff] PGTABLE [ 0.000000] BRK [0x207f26000, 0x207f26fff] PGTABLE [ 0.000000] BRK [0x207f27000, 0x207f27fff] PGTABLE [ 0.000000] BRK [0x207f28000, 0x207f28fff] PGTABLE [ 0.000000] BRK [0x207f29000, 0x207f29fff] PGTABLE [ 0.000000] BRK [0x207f2a000, 0x207f2afff] PGTABLE [ 0.000000] BRK [0x207f2b000, 0x207f2bfff] PGTABLE [ 0.000000] BRK [0x207f2c000, 0x207f2cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3246f000-0x3522efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 0x00000000DAFFE170 000094 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: FACP 0x00000000DAFEE000 00010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000DAFF1000 0092DA (v02 SECCSD IVB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF7B000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTL 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 0x00000000DAFF0000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 0x00000000DAFED000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000DAFEC000 000098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000DAFEB000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: FPDT 0x00000000DAFEA000 000054 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 0x00000000DAFE9000 0007D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFE8000 000AD0 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000DAFE7000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000DAF78000 000055 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFE5000 00027E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x31f5cd000-0x31f5f7fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000031f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000c42a9fff] [ 0.000000] node 0: [mem 0x00000000c44ac000-0x00000000d33eefff] [ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000031f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031f5fffff] [ 0.000000] On node 0 totalpages: 3089290 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13432 pages used for memmap [ 0.000000] DMA32 zone: 859630 pages, LIFO batch:31 [ 0.000000] Normal zone: 34776 pages used for memmap [ 0.000000] Normal zone: 2225664 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc42aa000-0xc44abfff] [ 0.000000] PM: Registered nosave memory: [mem 0xd33ef000-0xdaeeefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff975a5f200000 s119384 r8192 d32168 u262144 [ 0.000000] pcpu-alloc: s119384 r8192 d32168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3040862 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.4-041204-generic root=UUID=6b614287-8ce5-49c5-b66d-e92fa9568c2b ro rootflags=subvol=@ quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12023928K/12357160K available (9111K kernel code, 2530K rwdata, 3976K rodata, 2260K init, 2392K bss, 333232K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 37000 entries in 145 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:524544 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1496.459 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.91 BogoMIPS (lpj=5985836) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170303 [ 0.013107] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.013150] Security Framework initialized [ 0.013152] Yama: becoming mindful. [ 0.013175] AppArmor: AppArmor initialized [ 0.014494] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.019493] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.021725] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021748] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.022138] CPU: Physical Processor ID: 0 [ 0.022139] CPU: Processor Core ID: 0 [ 0.022145] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.022146] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.022152] mce: CPU supports 7 MCE banks [ 0.022163] CPU0: Thermal monitoring enabled (TM1) [ 0.022175] process: using mwait in idle threads [ 0.022179] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.022180] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.022386] Freeing SMP alternatives memory: 32K [ 0.026054] smpboot: Max logical packages: 4 [ 0.026135] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.026616] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066314] TSC deadline timer enabled [ 0.066318] smpboot: CPU0: Intel(R) Core(TM) i3-2377M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.066411] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.066443] ... version: 3 [ 0.066444] ... bit width: 48 [ 0.066445] ... generic registers: 4 [ 0.066446] ... value mask: 0000ffffffffffff [ 0.066447] ... max period: 00007fffffffffff [ 0.066448] ... fixed-purpose events: 3 [ 0.066449] ... event mask: 000000070000000f [ 0.067691] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.067719] smp: Bringing up secondary CPUs ... [ 0.067836] x86: Booting SMP configuration: [ 0.067837] .... node #0, CPUs: #1 #2 #3 [ 0.306034] smp: Brought up 1 node, 4 CPUs [ 0.306034] smpboot: Total of 4 processors activated (11975.70 BogoMIPS) [ 0.308174] sched_clock: Marking stable (308000000, 0)->(308176208, -176208) [ 0.308764] devtmpfs: initialized [ 0.308836] x86/mm: Memory block size: 128MB [ 0.313125] evm: security.selinux [ 0.313126] evm: security.SMACK64 [ 0.313127] evm: security.SMACK64EXEC [ 0.313128] evm: security.SMACK64TRANSMUTE [ 0.313129] evm: security.SMACK64MMAP [ 0.313129] evm: security.ima [ 0.313130] evm: security.capability [ 0.313252] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes) [ 0.313343] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.313359] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.313456] pinctrl core: initialized pinctrl subsystem [ 0.313590] RTC time: 17:35:19, date: 08/02/17 [ 0.313718] NET: Registered protocol family 16 [ 0.314042] cpuidle: using governor ladder [ 0.314089] cpuidle: using governor menu [ 0.314092] PCCT header not found. [ 0.314161] ACPI: bus type PCI registered [ 0.314162] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.314256] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.314276] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.314287] PCI: Using configuration type 1 for base access [ 0.314378] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.316428] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.316764] ACPI: Added _OSI(Module Device) [ 0.316766] ACPI: Added _OSI(Processor Device) [ 0.316767] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.316768] ACPI: Added _OSI(Processor Aggregator Device) [ 0.317084] ACPI: Executed 1 blocks of module-level executable AML code [ 0.322069] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.325436] ACPI: Dynamic OEM Table Load: [ 0.325448] ACPI: SSDT 0xFFFF975A509DB800 000784 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.325901] ACPI: Dynamic OEM Table Load: [ 0.325910] ACPI: SSDT 0xFFFF975A50A2B400 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.326228] ACPI: Dynamic OEM Table Load: [ 0.326235] ACPI: SSDT 0xFFFF975A50A4C000 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.327312] ACPI : EC: EC started [ 0.327313] ACPI : EC: interrupt blocked [ 0.329456] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC [ 0.329459] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.329462] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions [ 0.329462] ACPI: Interpreter enabled [ 0.329499] ACPI: (supports S0 S1 S3 S4 S5) [ 0.329500] ACPI: Using IOAPIC for interrupt routing [ 0.329536] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.340459] ACPI: Power Resource [FN00] (off) [ 0.340583] ACPI: Power Resource [FN01] (off) [ 0.340705] ACPI: Power Resource [FN02] (off) [ 0.340827] ACPI: Power Resource [FN03] (off) [ 0.340956] ACPI: Power Resource [FN04] (off) [ 0.341783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.341789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.341986] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.342599] PCI host bridge to bus 0000:00 [ 0.342603] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.342604] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.342606] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.342608] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.342611] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.342621] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.342755] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.342769] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.342777] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.342783] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.342953] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.342987] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit] [ 0.343113] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.343183] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.343238] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.343274] pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit] [ 0.343401] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.343530] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.343559] pci 0000:00:1a.0: reg 0x10: [mem 0xf061a000-0xf061a3ff] [ 0.343704] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.343826] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.343859] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit] [ 0.343997] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.344074] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.344127] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.344264] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.344340] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.344397] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.344533] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.344610] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.344668] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.344697] pci 0000:00:1d.0: reg 0x10: [mem 0xf0619000-0xf06193ff] [ 0.344838] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.344966] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.345231] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.345262] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.345277] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.345292] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.345308] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.345322] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.345335] pci 0000:00:1f.2: reg 0x24: [mem 0xf0618000-0xf06187ff] [ 0.345418] pci 0000:00:1f.2: PME# supported from D3hot [ 0.345529] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.345553] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit] [ 0.345595] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.345859] pci 0000:01:00.0: [8086:088e] type 00 class 0x028000 [ 0.345924] pci 0000:01:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit] [ 0.346201] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.346273] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.357000] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.357010] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.357184] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.357292] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.357425] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.357508] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.357944] pci 0000:02:00.0: supports D1 D2 [ 0.357946] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.358118] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.369052] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.369057] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.369071] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.370175] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.370255] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.370333] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.370409] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.370484] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.370560] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.370635] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.370710] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.371531] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.371616] ACPI : EC: interrupt unblocked [ 0.371624] ACPI : EC: event unblocked [ 0.371632] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.371634] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events [ 0.371755] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.371758] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.371763] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.371763] vgaarb: loaded [ 0.372013] SCSI subsystem initialized [ 0.372082] libata version 3.00 loaded. [ 0.372106] ACPI: bus type USB registered [ 0.372128] usbcore: registered new interface driver usbfs [ 0.372138] usbcore: registered new interface driver hub [ 0.372164] usbcore: registered new device driver usb [ 0.372246] EDAC MC: Ver: 3.0.0 [ 0.372439] PCI: Using ACPI for IRQ routing [ 0.374407] PCI: pci_cache_line_size set to 64 bytes [ 0.374471] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.374473] e820: reserve RAM buffer [mem 0xc42aa000-0xc7ffffff] [ 0.374475] e820: reserve RAM buffer [mem 0xd33ef000-0xd3ffffff] [ 0.374476] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.374477] e820: reserve RAM buffer [mem 0x31f600000-0x31fffffff] [ 0.374598] NetLabel: Initializing [ 0.374599] NetLabel: domain hash size = 128 [ 0.374600] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.374624] NetLabel: unlabeled traffic allowed by default [ 0.374792] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.374800] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.376828] clocksource: Switched to clocksource hpet [ 0.392031] VFS: Disk quotas dquot_6.6.0 [ 0.392063] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.392172] AppArmor: AppArmor Filesystem Enabled [ 0.392240] pnp: PnP ACPI init [ 0.392753] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.392756] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.392758] system 00:00: [io 0x5000-0x5003] has been reserved [ 0.392761] system 00:00: [io 0xffff] has been reserved [ 0.392763] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.392765] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.392767] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.392769] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 0.392771] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.392773] system 00:00: [io 0x5000-0x500f] could not be reserved [ 0.392780] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.392816] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.392918] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.392922] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.392962] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.393024] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.393236] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.393238] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.393241] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.393243] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.393245] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.393247] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.393249] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.393251] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.393254] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.393256] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.393258] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved [ 0.393262] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.393819] pnp: PnP ACPI: found 6 devices [ 0.401207] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.401246] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.401255] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.401269] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.401273] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.401284] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.401296] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.401298] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.401300] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.401302] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window] [ 0.401304] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.401306] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.401308] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.401441] NET: Registered protocol family 2 [ 0.401709] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.402066] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.402261] TCP: Hash tables configured (established 131072 bind 65536) [ 0.402329] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.402405] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.402526] NET: Registered protocol family 1 [ 0.402548] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.403306] PCI: CLS 64 bytes, default 64 [ 0.403370] Unpacking initramfs... [ 1.624920] Freeing initrd memory: 46848K [ 1.624966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.624971] software IO TLB [mem 0xcf3ef000-0xd33ef000] (64MB) mapped at [ffff97580f3ef000-ffff9758133eefff] [ 1.625255] Scanning for low memory corruption every 60 seconds [ 1.625720] audit: initializing netlink subsys (disabled) [ 1.625779] audit: type=2000 audit(1501695320.620:1): state=initialized audit_enabled=0 res=1 [ 1.626297] Initialise system trusted keyrings [ 1.626309] Key type blacklist registered [ 1.626361] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.628088] zbud: loaded [ 1.628741] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.628941] fuse init (API version 7.26) [ 1.630974] Key type asymmetric registered [ 1.630976] Asymmetric key parser 'x509' registered [ 1.630998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.631042] io scheduler noop registered [ 1.631043] io scheduler deadline registered [ 1.631087] io scheduler cfq registered (default) [ 1.631710] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 1.631711] vesafb: scrolling: redraw [ 1.631713] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.631726] vesafb: framebuffer at 0xe0000000, mapped to 0xffffb07402800000, using 4160k, total 4160k [ 1.742546] Console: switching to colour frame buffer device 170x48 [ 1.852941] fb0: VESA VGA frame buffer device [ 1.852991] intel_idle: MWAIT substates: 0x21120 [ 1.852993] intel_idle: v0.4.1 model 0x2A [ 1.853196] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.853527] ACPI: AC Adapter [ADP1] (on-line) [ 1.853642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.853666] ACPI: Lid Switch [LID0] [ 1.853711] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.853715] ACPI: Power Button [PWRB] [ 1.853759] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.853762] ACPI: Power Button [PWRF] [ 1.855026] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.855387] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.855388] ACPI: Thermal Zone [TZ00] (66 C) [ 1.855723] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.855725] ACPI: Thermal Zone [TZ01] (30 C) [ 1.855790] GHES: HEST is not enabled! [ 1.855969] ACPI: Battery Slot [BAT1] (battery absent) [ 1.855971] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.857985] Linux agpgart interface v0.103 [ 1.860673] loop: module loaded [ 1.860898] libphy: Fixed MDIO Bus: probed [ 1.860899] tun: Universal TUN/TAP device driver, 1.6 [ 1.860950] PPP generic driver version 2.4.2 [ 1.861030] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.861033] ehci-pci: EHCI PCI platform driver [ 1.861215] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.861223] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.861240] ehci-pci 0000:00:1a.0: debug port 2 [ 1.865154] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.865173] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061a000 [ 1.881097] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.881189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.881191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.881193] usb usb1: Product: EHCI Host Controller [ 1.881195] usb usb1: Manufacturer: Linux 4.12.4-041204-generic ehci_hcd [ 1.881196] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.881474] hub 1-0:1.0: USB hub found [ 1.881485] hub 1-0:1.0: 3 ports detected [ 1.881820] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.881828] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.881845] ehci-pci 0000:00:1d.0: debug port 2 [ 1.885755] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.885773] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0619000 [ 1.901086] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.901160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.901162] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.901165] usb usb2: Product: EHCI Host Controller [ 1.901166] usb usb2: Manufacturer: Linux 4.12.4-041204-generic ehci_hcd [ 1.901168] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.901449] hub 2-0:1.0: USB hub found [ 1.901460] hub 2-0:1.0: 3 ports detected [ 1.901619] ehci-platform: EHCI generic platform driver [ 1.901641] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.901646] ohci-pci: OHCI PCI platform driver [ 1.901664] ohci-platform: OHCI generic platform driver [ 1.901674] uhci_hcd: USB Universal Host Controller Interface driver [ 1.901892] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.901899] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.902998] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 1.903006] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.903129] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.903132] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.903133] usb usb3: Product: xHCI Host Controller [ 1.903135] usb usb3: Manufacturer: Linux 4.12.4-041204-generic xhci-hcd [ 1.903137] usb usb3: SerialNumber: 0000:00:14.0 [ 1.903372] hub 3-0:1.0: USB hub found [ 1.903386] hub 3-0:1.0: 4 ports detected [ 1.903892] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.903898] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.903946] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.903949] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.903951] usb usb4: Product: xHCI Host Controller [ 1.903952] usb usb4: Manufacturer: Linux 4.12.4-041204-generic xhci-hcd [ 1.903954] usb usb4: SerialNumber: 0000:00:14.0 [ 1.904191] hub 4-0:1.0: USB hub found [ 1.904205] hub 4-0:1.0: 4 ports detected [ 1.904775] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 1.910905] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.910911] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.911264] mousedev: PS/2 mouse device common for all mice [ 1.911841] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.911872] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.911880] i2c /dev entries driver [ 1.911952] device-mapper: uevent: version 1.0.3 [ 1.912055] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx [ 1.912062] intel_pstate: Intel P-state driver initializing [ 1.912305] ledtrig-cpu: registered to indicate activity on CPUs [ 1.912346] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized [ 1.912810] NET: Registered protocol family 10 [ 1.918448] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.918634] Segment Routing with IPv6 [ 1.918663] NET: Registered protocol family 17 [ 1.918676] Key type dns_resolver registered [ 1.919112] RAS: Correctable Errors collector initialized. [ 1.919152] microcode: sig=0x206a7, pf=0x10, revision=0x29 [ 1.919239] microcode: Microcode Update Driver: v2.2. [ 1.919421] registered taskstats version 1 [ 1.919431] Loading compiled-in X.509 certificates [ 1.923453] Loaded X.509 cert 'Build time autogenerated kernel key: 87ede054dcd4345a5eeb9ef0c4b0ea4a416d4e06' [ 1.923480] zswap: loaded using pool lzo/zbud [ 1.941369] Key type big_key registered [ 1.941376] Key type trusted registered [ 1.943741] Key type encrypted registered [ 1.943746] AppArmor: AppArmor sha1 policy hashing enabled [ 1.943749] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.943781] evm: HMAC attrs: 0x1 [ 1.944078] Magic number: 13:992:591 [ 1.944217] rtc_cmos 00:01: setting system clock to 2017-08-02 17:35:21 UTC (1501695321) [ 1.944303] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.944303] EDD information not available. [ 1.944377] PM: Hibernation image not present or could not be loaded. [ 1.949369] Freeing unused kernel memory: 2260K [ 1.949371] Write protecting the kernel read-only data: 14336k [ 1.950022] Freeing unused kernel memory: 1112K [ 1.950543] Freeing unused kernel memory: 120K [ 1.954086] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.969379] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.969509] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.969523] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.970370] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.970420] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.973163] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.973265] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.973287] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.974059] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.974162] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.026825] wmi: Mapper loaded [ 2.067465] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.067477] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.068235] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffb074018bd000, e8:03:9a:0f:c4:4f, XID 0c900800 IRQ 25 [ 2.068239] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.072654] ahci 0000:00:1f.2: version 3.0 [ 2.072907] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 2.072911] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 2.085033] scsi host0: ahci [ 2.085251] scsi host1: ahci [ 2.085405] scsi host2: ahci [ 2.085548] scsi host3: ahci [ 2.085679] scsi host4: ahci [ 2.085814] scsi host5: ahci [ 2.085877] ata1: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618100 irq 26 [ 2.085880] ata2: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618180 irq 26 [ 2.085882] ata3: DUMMY [ 2.085883] ata4: DUMMY [ 2.085884] ata5: DUMMY [ 2.085885] ata6: DUMMY [ 2.112112] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.138987] [drm] Memory usable by graphics device = 2048M [ 2.138990] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 2.138992] fb: switching to inteldrmfb from VESA VGA [ 2.139024] Console: switching to colour dummy device 80x25 [ 2.139156] [drm] Replacing VGA console driver [ 2.145129] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.145131] [drm] Driver supports precise vblank timestamp query. [ 2.148645] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.159229] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 [ 2.160198] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.160556] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.193297] fbcon: inteldrmfb (fb0) is primary device [ 2.217108] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.229111] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 2.229129] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.365891] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.365894] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.366354] hub 1-1:1.0: USB hub found [ 2.366534] hub 1-1:1.0: 6 ports detected [ 2.377684] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.377687] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.378114] hub 2-1:1.0: USB hub found [ 2.378272] hub 2-1:1.0: 6 ports detected [ 2.400529] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.400555] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.401101] ata2.00: ATA-9: SanDisk SSD i100 24GB, 11.50.04, max UDMA/133 [ 2.401103] ata2.00: 46905264 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.401557] ata2.00: configured for UDMA/133 [ 2.402315] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 2.402319] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.404206] ata1.00: configured for UDMA/133 [ 2.404647] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5 [ 2.441373] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.441375] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.441377] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.441395] sd 0:0:0:0: [sda] Write Protect is off [ 2.441399] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.441429] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.441810] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 0.04 PQ: 0 ANSI: 5 [ 2.481405] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.481700] sd 1:0:0:0: [sdb] 46905264 512-byte logical blocks: (24.0 GB/22.4 GiB) [ 2.481740] sd 1:0:0:0: [sdb] Write Protect is off [ 2.481745] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.481861] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.482780] sdb: sdb1 [ 2.483315] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.531904] sda: sda2 sda4 < sda5 sda6 sda7 sda8 > [ 2.532591] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.604269] usb 3-1: New USB device found, idVendor=047f, idProduct=c022 [ 2.604271] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.604274] usb 3-1: Product: Plantronics C310 [ 2.604275] usb 3-1: Manufacturer: Plantronics [ 2.604277] usb 3-1: SerialNumber: 32A26B7A3023464D9CF5091CF1780483 [ 2.610622] hidraw: raw HID events driver (C) Jiri Kosina [ 2.653144] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 2.657327] tsc: Refined TSC clocksource calibration: 1496.600 MHz [ 2.657337] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159296d3708, max_idle_ns: 440795218047 ns [ 2.665138] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.672931] random: fast init done [ 2.721156] usb 3-2: new low-speed USB device number 3 using xhci_hcd [ 2.777940] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da [ 2.777943] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.846907] usbcore: registered new interface driver usbhid [ 2.846908] usbhid: USB HID core driver [ 2.850011] input: Plantronics Plantronics C310 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.3/0003:047F:C022.0001/input/input7 [ 2.864919] usb 3-2: New USB device found, idVendor=046d, idProduct=c077 [ 2.864924] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.864927] usb 3-2: Product: USB Optical Mouse [ 2.864930] usb 3-2: Manufacturer: Logitech [ 2.870398] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C077.0002/input/input8 [ 2.879431] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1035 [ 2.879433] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.879435] usb 1-1.4: Product: WebCam SC-13HDL12131N [ 2.879436] usb 1-1.4: Manufacturer: Generic [ 2.879438] usb 1-1.4: SerialNumber: 200901010001 [ 2.895394] Console: switching to colour frame buffer device 170x48 [ 2.909540] plantronics 0003:047F:C022.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Plantronics Plantronics C310] on usb-0000:00:14.0-1/input3 [ 2.909584] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 2.916061] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.950592] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 2.965579] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 2.980738] psmouse serio1: elantech: Elan sample query result 03, 3f, 86 [ 3.056715] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 3.681315] clocksource: Switched to clocksource tsc [ 4.205192] raid6: sse2x1 gen() 4015 MB/s [ 4.273205] raid6: sse2x1 xor() 3101 MB/s [ 4.341215] raid6: sse2x2 gen() 4985 MB/s [ 4.409214] raid6: sse2x2 xor() 3603 MB/s [ 4.477218] raid6: sse2x4 gen() 5813 MB/s [ 4.545229] raid6: sse2x4 xor() 4400 MB/s [ 4.545231] raid6: using algorithm sse2x4 gen() 5813 MB/s [ 4.545233] raid6: .... xor() 4400 MB/s, rmw enabled [ 4.545234] raid6: using ssse3x2 recovery algorithm [ 4.547297] xor: automatically using best checksumming function avx [ 4.577170] Btrfs loaded, crc32c=crc32c-intel [ 5.227524] BTRFS: device fsid 6b614287-8ce5-49c5-b66d-e92fa9568c2b devid 1 transid 34319 /dev/sdb1 [ 5.261224] BTRFS info (device sdb1): disk space caching is enabled [ 5.261227] BTRFS info (device sdb1): has skinny extents [ 5.276860] BTRFS info (device sdb1): detected SSD devices, enabling SSD mode [ 5.505420] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.511274] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid) [ 5.511476] systemd[1]: Detected architecture x86-64. [ 5.512287] systemd[1]: Set hostname to <caravena-530U3C-530U4C>. [ 5.614904] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.615051] systemd[1]: Listening on udev Control Socket. [ 5.615074] systemd[1]: Reached target Remote File Systems. [ 5.615111] systemd[1]: Listening on udev Kernel Socket. [ 5.615154] systemd[1]: Listening on Syslog Socket. [ 5.615207] systemd[1]: Listening on Journal Socket. [ 5.615284] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.679635] lp: driver loaded but no devices found [ 5.687269] ppdev: user-space parallel port driver [ 5.802538] BTRFS info (device sdb1): disk space caching is enabled [ 5.826875] systemd-journald[286]: Received request to flush runtime journal from PID 1 [ 6.075895] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.085713] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170303/utaddress-247) [ 6.085725] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.085729] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247) [ 6.085737] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.085739] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247) [ 6.085746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.085748] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247) [ 6.085755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.085756] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.188537] media: Linux media interface: v0.10 [ 6.195542] Bluetooth: Core ver 2.22 [ 6.195565] NET: Registered protocol family 31 [ 6.195566] Bluetooth: HCI device and connection manager initialized [ 6.195571] Bluetooth: HCI socket layer initialized [ 6.195575] Bluetooth: L2CAP socket layer initialized [ 6.195584] Bluetooth: SCO socket layer initialized [ 6.209229] Linux video capture interface: v2.00 [ 6.233964] random: crng init done [ 6.249777] usbcore: registered new interface driver btusb [ 6.253704] Intel(R) Wireless WiFi driver for Linux [ 6.253706] Copyright(c) 2003- 2015 Intel Corporation [ 6.253931] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.274204] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 6.303281] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL12131N (2232:1035) [ 6.308056] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 6.308059] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 6.308061] RAPL PMU: hw unit of domain package 2^-16 Joules [ 6.308062] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 6.328892] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 6.328896] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 6.328899] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 6.328903] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [ 6.330950] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 6.363896] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized! [ 6.363901] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized! [ 6.363905] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized! [ 6.368531] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 6.417157] input: WebCam SC-13HDL12131N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9 [ 6.419479] usbcore: registered new interface driver uvcvideo [ 6.419482] USB Video Class driver (1.1.1) [ 6.460735] samsung_laptop: detected SABI interface: SwSmi@ [ 6.580403] usb 3-1: 2:1: cannot get freq at ep 0x1 [ 6.609270] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.609275] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.609279] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 6.609282] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.609284] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.609288] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 6.609291] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 6.630781] usb 3-1: Warning! Unlikely big volume range (=10361), cval->res is probably wrong. [ 6.630787] usb 3-1: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/10361/1 [ 6.642991] intel_rapl: Found RAPL domain package [ 6.642993] intel_rapl: Found RAPL domain core [ 6.642995] intel_rapl: Found RAPL domain uncore [ 6.643002] intel_rapl: RAPL package 0 domain package locked by BIOS [ 6.645790] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.657852] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 6.657984] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 6.658109] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 6.671757] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 6.685975] usbcore: registered new interface driver snd-usb-audio [ 7.716095] Adding 3999740k swap on /dev/sda5. Priority:-1 extents:1 across:3999740k FS [ 9.314704] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 9.587521] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 9.676228] audit: type=1400 audit(1501695329.231:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=715 comm="apparmor_parser" [ 9.676234] audit: type=1400 audit(1501695329.231:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=715 comm="apparmor_parser" [ 9.680676] audit: type=1400 audit(1501695329.235:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=716 comm="apparmor_parser" [ 9.683132] audit: type=1400 audit(1501695329.238:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=712 comm="apparmor_parser" [ 9.683137] audit: type=1400 audit(1501695329.238:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=712 comm="apparmor_parser" [ 9.683139] audit: type=1400 audit(1501695329.238:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=712 comm="apparmor_parser" [ 9.683142] audit: type=1400 audit(1501695329.238:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=712 comm="apparmor_parser" [ 9.684245] audit: type=1400 audit(1501695329.239:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=718 comm="apparmor_parser" [ 9.687410] audit: type=1400 audit(1501695329.242:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=717 comm="apparmor_parser" [ 9.687415] audit: type=1400 audit(1501695329.242:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=717 comm="apparmor_parser" [ 10.072955] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.072958] Bluetooth: BNEP filters: protocol multicast [ 10.072963] Bluetooth: BNEP socket layer initialized [ 10.496247] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 10.605889] r8169 0000:02:00.0 enp2s0: link down [ 10.606183] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 10.617338] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 10.619500] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 10.626234] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 10.626345] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 10.917875] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 10.924610] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 10.924709] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 11.007266] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 11.013917] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 11.020639] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 11.020739] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 11.301444] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 11.308183] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 11.308291] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 11.391173] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 11.521338] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 12.291407] usb 3-1: 2:1: cannot get freq at ep 0x1 [ 12.298306] usb 3-1: 1:1: cannot get freq at ep 0x81 [ 14.997085] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 15.003828] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 15.003930] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 15.286281] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 15.293026] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled [ 15.293137] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0 [ 15.375685] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 15.487729] wlp1s0: authenticate with 4c:fa:ca:57:14:f4 [ 15.490815] wlp1s0: send auth to 4c:fa:ca:57:14:f4 (try 1/3) [ 15.549673] wlp1s0: authenticated [ 15.550298] wlp1s0: associate with 4c:fa:ca:57:14:f4 (try 1/3) [ 15.560567] wlp1s0: RX AssocResp from 4c:fa:ca:57:14:f4 (capab=0x1411 status=0 aid=1) [ 15.579304] wlp1s0: associated [ 15.579382] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 15.651308] wlp1s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 4c:fa:ca:57:14:f4 [ 25.088285] Bluetooth: RFCOMM TTY layer initialized [ 25.088294] Bluetooth: RFCOMM socket layer initialized [ 25.088303] Bluetooth: RFCOMM ver 1.11 [ 3359.864643] perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 4177.528030] perf: interrupt took too long (3168 > 3158), lowering kernel.perf_event_max_sample_rate to 63000 [ 5120.795507] perf: interrupt took too long (3992 > 3960), lowering kernel.perf_event_max_sample_rate to 50000
