Hello Alan,
many thanks for your response.
Well, I am following the whole discussion from the very start and for my
taste it is too superficial - don't know whether this is the right
wording. Please get me right. We need some kind of implementation
specification or a sample way on how to implement stuff. At some point I
honestly lost track, thus I was asking for a summary so in the end the
result is what we want. If it is clear to everyone what shall be done it
should not be kind of a big deal to quickly sum it up which I/we would
highly appreciate.
Many thanks
Eric
Am 02.08.2017 16:16, schrieb Alan Tull:
On Wed, Aug 2, 2017 at 6:36 AM, Eric Schwarz <eas@xxxxxxxxxxxxxxxxxxx>
wrote:
Dear all,
DENX Software Engineering develops and brings this driver to mainline
on
behalf of us (ARRI*).
Since there was a lot of discussion around this patch series I would
highly
appreciate if someone could sum up what needs to be changed in detail
in
order to get this driver into the mainline as I am used it from the
other
"line-by-line" reviews. I understood that the approach is not generic
enough
- please correct me if I am wrong on that point. We somehow need a
commitment that if we change it to another way that the whole
discussion
does not start from scratch.
Many thanks
Eric
Hi Eric,
Patchwork collects all email response to patchsets posted on this
mailing list [1] so that could be helpful for you here.
Alan
[1] https://patchwork.kernel.org/project/linux-fpga/list/?submitter=769
* I am just writing from my private e-mail address since Outlook
obviously
renders all my mails as HTML despite what I am configuring.
[1]... http://www.arri.com
Am 06.07.2017 22:49, schrieb Anatolij Gustschin:
This series adds support for fast passive parallel (FPP) Altera
FPGA configuration using FTDI FT232H chip in FT245-FIFO mode.
It has been used to configure Arria 10 FPGAs.
Patch 1 adds an FT232H MFD driver with common functions that
can be used for FT232H USB-GPIO/I2C/SPI master adapter drivers.
Currently it is used for FT232H GPIO support (in patch 2) and
for FT245 FIFO transfers in FPP FPGA manager driver in patch 3.
Driver support for FT232H USB-I2C/SPI master adapters can be
added later.
Patch 2 adds a simple GPIO driver supporting four FT232H CBUS GPIOs.
Patch 3 adds an FPGA Manager driver for Altera FPP FPGA configuration
via FT232H FT245-FIFO interface.
Anatolij Gustschin (3):
mfd: Add support for FTDI FT232H devices
gpio: Add FT232H CBUS GPIO driver
fpga manager: Add FT232H driver for Altera FPP
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile | 1 +
drivers/fpga/ftdi-fifo-fpp.c | 569
++++++++++++++++++++++++++++++++++++++++++
drivers/gpio/Kconfig | 11 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-ftdi-cbus.c | 251 +++++++++++++++++++
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ftdi-ft232h.c | 470 ++++++++++++++++++++++++++++++++++
include/linux/mfd/ftdi/ftdi.h | 71 ++++++
10 files changed, 1391 insertions(+)
create mode 100644 drivers/fpga/ftdi-fifo-fpp.c
create mode 100644 drivers/gpio/gpio-ftdi-cbus.c
create mode 100644 drivers/mfd/ftdi-ft232h.c
create mode 100644 include/linux/mfd/ftdi/ftdi.h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
