On Thu, Jul 13, 2017 at 06:25:25PM +0200, Anatolij Gustschin wrote: > On FT232H the interface mode can be configured in the EEPROM, > and the async UART mode is configured by default. The chip is > also in async UART mode if no EEPROM is connected. > > Check the EEPROM configuration and do not bind as serial device > when different interface mode is programmed in the EEPROM. Thanks for the patch. As you may have inferred from my reply to your MFD series, this won't be needed for a while still however. Also note that some people already use asynchronous FIFO mode using this driver (also mentioned in the datasheets as an option) so only binding in UART mode would be too restrictive. Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
