Driver currently resumes and increments pm usage_count
of its child device (dwc3 main) from its runtime_resume
handler. This requires dwc3 runtime_resume to perform
pm_runtime_put to decrement the pm usage_count. However
runtime_put from dwc3 happens for non pci drivers
(e.g. dwc3-if-simple.c) as well which results in dwc3
pm usage_count becoming negative after couple of
runtime suspend resume iterations. Fix this by
performing runtime_get/put from dwc3-pci driver only
using workqueue.
Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index fc556a4..87dedb9 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1378,7 +1378,6 @@ static int dwc3_runtime_resume(struct device *dev)
}
pm_runtime_mark_last_busy(dev);
- pm_runtime_put(dev);
return 0;
}
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 84a2ceb..e354acc 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/workqueue.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
@@ -61,6 +62,7 @@ struct dwc3_pci {
u8 uuid[16];
unsigned int has_dsm_for_pm:1;
+ struct work_struct wakeup_work;
};
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
@@ -174,6 +176,22 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
return 0;
}
+#ifdef CONFIG_PM
+static void dwc3_pci_resume_work(struct work_struct *work)
+{
+ struct dwc3_pci *dwc = container_of(work, struct dwc3_pci, wakeup_work);
+ struct platform_device *dwc3 = dwc->dwc3;
+ int ret;
+
+ ret = pm_runtime_get_sync(&dwc3->dev);
+ if (ret)
+ return;
+
+ pm_runtime_mark_last_busy(&dwc3->dev);
+ pm_runtime_put_sync_autosuspend(&dwc3->dev);
+}
+#endif
+
static int dwc3_pci_probe(struct pci_dev *pci,
const struct pci_device_id *id)
{
@@ -233,6 +251,9 @@ static int dwc3_pci_probe(struct pci_dev *pci,
device_set_run_wake(dev, true);
pci_set_drvdata(pci, dwc);
pm_runtime_put(dev);
+#ifdef CONFIG_PM
+ INIT_WORK(&dwc->wakeup_work, dwc3_pci_resume_work);
+#endif
return 0;
err:
@@ -244,6 +265,9 @@ static void dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *dwc = pci_get_drvdata(pci);
+#ifdef CONFIG_PM
+ cancel_work_sync(&dwc->wakeup_work);
+#endif
device_init_wakeup(&pci->dev, false);
pm_runtime_get(&pci->dev);
platform_device_unregister(dwc->dwc3);
@@ -319,14 +343,15 @@ static int dwc3_pci_runtime_suspend(struct device *dev)
static int dwc3_pci_runtime_resume(struct device *dev)
{
struct dwc3_pci *dwc = dev_get_drvdata(dev);
- struct platform_device *dwc3 = dwc->dwc3;
int ret;
ret = dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
if (ret)
return ret;
- return pm_runtime_get(&dwc3->dev);
+ queue_work(pm_wq, &dwc->wakeup_work);
+
+ return 0;
}
#endif /* CONFIG_PM */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
