On Mon, Jun 12, 2017 at 10:18 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: > Let's get some help from people who understand PCI well. > > Here's the general problem: Kai-Heng has a PCI-based USB host > controller that advertises wakeup capability from D3, but it doesn't > assert PME# from D3 when it should. For "lspci -vv" output, see > > http://marc.info/?l=linux-usb&m=149570231732519&w=2 > > On Mon, 12 Jun 2017, Kai-Heng Feng wrote: > >> On Mon, Jun 12, 2017 at 3:04 PM, Kai-Heng Feng >> <kai.heng.feng@xxxxxxxxxxxxx> wrote: >> > On Fri, Jun 9, 2017 at 10:43 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: >> >> On Fri, 9 Jun 2017, Kai-Heng Feng wrote: >> >> >> >> Is this really the right solution? Maybe it would be better to allow >> >> the controller to go into D3 provided no wakeup signal is needed. You >> >> could do: >> >> >> >> device_set_wakeup_capable(&pdev->dev, 0); >> > >> > This doesn't work. >> > After applying this function, still nothing happens when devices get plugged in. >> > IIUC this function disable the wakeup function, but what I want to do >> > here is to have PME signal works even when runtime PM is enabled. > > This may indicate a bug in either the PCI or USB stacks (or both!). If > a driver requires wakeup capability from runtime suspend but the device > does not provide it, the PCI core should not allow the device to go > into runtime suspend. Or is that the driver's responsibility? > >> > I also saw some legacy PCI PM stuff, so I also tried: >> > device_set_wakeup_capable(&pdev->dev, 1); >> > ...doesn't work either. >> > >> >> >> >> Another alternative is to put the controller into D2 instead of D3, but >> >> (1) I don't know how to do that, and (2) we don't know if wakeup >> >> signalling works any better in D2 than it does in D3. >> > >> > I'll try if D2 works. >> >> Put the device into D2 instead of D3 can make the wakeup signaling >> work, i.e. USB devices can be correctly detected after plugged into >> EHCI port. >> >> Do you think this alternative an acceptable workaround? > > Yes, it is. The difficulty is that I don't know how to tell the PCI > core that the device should go in D2 during runtime suspend instead of > D3. Some sort of quirk may be needed -- perhaps Bjorn can help. > FWIW, this is the diff I used to make the controller transits to D2 instead of D3: diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 563901cd9c06..36663688404a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -922,6 +922,9 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) if (dev->current_state == state) return 0; + if (state > PCI_D2 && (dev->dev_flags & PCI_DEV_FLAGS_MAX_D2)) + state = PCI_D2; + __pci_start_power_transition(dev, state); /* This device is quirked not to be put into D3, so diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 93326974ff4b..a2c1fe62974a 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -181,6 +181,8 @@ static int ehci_pci_setup(struct usb_hcd *hcd) if (pdev->device == 0x7808) { ehci->use_dummy_qh = 1; ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); + + pdev->dev_flags |= PCI_DEV_FLAGS_MAX_D2; } break; case PCI_VENDOR_ID_VIA: diff --git a/include/linux/pci.h b/include/linux/pci.h index 8039f9f0ca05..6f86f2aa8548 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -188,6 +188,7 @@ enum pci_dev_flags { * the direct_complete optimization. */ PCI_DEV_FLAGS_NEEDS_RESUME = (__force pci_dev_flags_t) (1 << 11), + PCI_DEV_FLAGS_MAX_D2 = (__force pci_dev_flags_t) (1 << 12), }; enum pci_irq_reroute_variant { -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
