Only RTL8153 could set coalesce, so move the default setting for
rtl8152_probe() to r8153_init().
Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
---
drivers/net/usb/r8152.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 565ac5b..f78111c 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3579,6 +3579,19 @@ static void r8153_init(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
rtl_tally_reset(tp);
+
+ switch (tp->udev->speed) {
+ case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
+ tp->coalesce = COALESCE_SUPER;
+ break;
+ case USB_SPEED_HIGH:
+ tp->coalesce = COALESCE_HIGH;
+ break;
+ default:
+ tp->coalesce = COALESCE_SLOW;
+ break;
+ }
}
static int rtl8152_pre_reset(struct usb_interface *intf)
@@ -4524,19 +4537,6 @@ static int rtl8152_probe(struct usb_interface *intf,
tp->mii.reg_num_mask = 0x1f;
tp->mii.phy_id = R8152_PHY_ID;
- switch (udev->speed) {
- case USB_SPEED_SUPER:
- case USB_SPEED_SUPER_PLUS:
- tp->coalesce = COALESCE_SUPER;
- break;
- case USB_SPEED_HIGH:
- tp->coalesce = COALESCE_HIGH;
- break;
- default:
- tp->coalesce = COALESCE_SLOW;
- break;
- }
-
tp->autoneg = AUTONEG_ENABLE;
tp->speed = tp->mii.supports_gmii ? SPEED_1000 : SPEED_100;
tp->duplex = DUPLEX_FULL;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
