v3: Fix some checkpatch.pl warnings
For AMD Promontory xHCI host, although you can disable USB 2.0 ports in BIOS
settings, those ports will be enabled anyway after you remove a device on
that port and re-plug it in again. It's a known limitation of the chip.
As a workaround we can clear the PORT_WAKE_BITS.
Signed-off-by: Jiahau Chang <Lars_Chang@xxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-hub.c | 19 ++++++++++++++-----
drivers/usb/host/xhci-pci.c | 13 +++++++++++++
drivers/usb/host/xhci.h | 2 ++
3 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0dde49c..aad32c6 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1218,12 +1218,19 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
- xhci_set_remote_wake_mask(xhci, port_array,
+ if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) && (hcd->speed < HCD_USB3)) {
+ temp = readl(port_array[wIndex]);
+ xhci_dbg(xhci, "skip set port remote wake mask, "
+ "actual port %d status = 0x%x\n",
+ wIndex, temp);
+ } else {
+ xhci_set_remote_wake_mask(xhci, port_array,
wIndex, wake_mask);
- temp = readl(port_array[wIndex]);
- xhci_dbg(xhci, "set port remote wake mask, "
- "actual port %d status = 0x%x\n",
- wIndex, temp);
+ temp = readl(port_array[wIndex]);
+ xhci_dbg(xhci, "set port remote wake mask, "
+ "actual port %d status = 0x%x\n",
+ wIndex, temp);
+ }
break;
case USB_PORT_FEAT_BH_PORT_RESET:
temp |= PORT_WR;
@@ -1461,6 +1468,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
t2 |= PORT_WKOC_E | PORT_WKCONN_E;
t2 &= ~PORT_WKDISC_E;
}
+ if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) && (hcd->speed < HCD_USB3))
+ t2 &= ~PORT_WAKE_BITS;
} else
t2 &= ~PORT_WAKE_BITS;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index fcf1f3f..3b76d53 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -54,6 +54,11 @@
#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
+
static const char hcd_name[] = "xhci_hcd";
static struct hc_driver __read_mostly xhci_pci_hc_driver;
@@ -135,6 +140,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
if (pdev->vendor == PCI_VENDOR_ID_AMD)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+ if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
+ ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
+ (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
+ (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
+ (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
+ xhci->quirks |= XHCI_U2_DISABLE_WAKE;
+
+
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_INTEL_HOST;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 73a28a9..48b262a 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1819,6 +1819,8 @@ struct xhci_hcd {
/* For controller with a broken Port Disable implementation */
#define XHCI_BROKEN_PORT_PED (1 << 25)
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
+#define XHCI_U2_DISABLE_WAKE (1 << 27)
+
unsigned int num_active_eps;
unsigned int limit_active_eps;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
