Re: [PATCH v4 0/9] usb: musb: tusb6010_omap: Convert to DMAengine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 18, 2017 at 04:11:58PM +0300, Peter Ujfalusi wrote:
> Hi,
> 
> Changes since v3:
> - typos in commit message of patch 3 and 5 fixed
> - long line fixed in patch 5
> - Ack from Vinod is added to the first patch
> - The series depends on: http://marc.info/?l=linux-omap&m=149459699415599&w=2
> 
> Changes since v2:
> - patch 5 from the v1 has been sent separately
>  (usb: musb: tusb6010_omap: Do not reset the other direction's packet size)
> - Added Tested-by from Tony.
> 
> Changes since v1:
> - Fix the port_window support in omap-dma DMAengine driver
> - MUSB_G_NO_SKB_RESERVE quirk flag addition to msub core
> - packet size corruption fix for tusb6010
> - Handle DMA completion for TX also in the DMA callback
> 
> The v1 series was tested with g_cdc where only the DMA was only enabled for TX
> and because of that I have not noticed that the sDMA code was not correct for RX,
> it only worked for TX case.
> 
> The ASYNC mode of tusb6010 is really unstable, we get corrupted TX/RX offset
> register quite easily, but the SYNC mode is stable.
> 
> The series was tested on top of next-20170510 with g_ncm module since with this
> we can use the quirk to avoid skb_reserve and get properly aligned buffers for
> DMA.
> The n810 is using nfsroot.
> 
> The device would not boot to prompt most of the time before patch 5 (packet size
> reset fix).
> With that patch in, the device would boot up fine most of the cases, but will
> fail pretty fast with my stress test [1].
> After the first 9 patch the legacy DMA mode is going to be stable with g_ncm, it
> boots to prompt, and survives the stress test [1].
> 
> The last patch is going the DMAengine conversion and I have run the stress test
> against it over 3 hours (ping-test.sh wrap count is 139).
> 
> [1] Running these in parallel:
> ping -f 192.168.0.2
> ping -f -s 2048 192.168.0.2
> ping-test.sh 192.168.0.2 1
> 
> and (nfsroot) time to time:
> scp root@192.168.0.1:/usr/portage/distfiles/thunderbird-52.1.0.source.tar.xz /
> 
> $ ls -alh /usr/portage/distfiles/thunderbird-52.1.0.source.tar.xz 
> 218M Apr 30 15:46 /usr/portage/distfiles/thunderbird-52.1.0.source.tar.xz
> 
> In essence copy 218M from my host back to the host.
> 
> ping-test.sh (modified version from Tony to show the wrap count):
> #!/bin/bash
> 
> device=$1
> size=$2
> wraps=0
> 
> while [ 1 ]; do
>         #echo "Pinging with size $size"
>         if ! ping -w0 -c1 -s$size $device > /dev/null 2>&1; then
>                 break;
>         fi
>         size=$(expr $size + 1)
> 
>         if [ $size -gt 8192 ]; then
> 	        wraps=$(expr $wraps + 1)
> 		echo "wrapping ($wraps) at $size"
>                 size=1
>         fi
> done
> echo "Test ran up to $size"
> 
> Regards,
> Peter
> 
> CC: dmaengine@xxxxxxxxxxxxxxx
> I only send the cover letter and the DMAengine patch for the dmaengine list, the
> rest can be checked - if there is interest - via lkml
> ---
> Peter Ujfalusi (9):
>   dmaengine: omap-dma: port_window support correction for both direction
>   usb: musb: Add quirk to avoid skb reserve in gadget mode
>   usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
>   usb: musb: tusb6010_omap: Use one musb_ep_select call in
>     tusb_omap_dma_program
>   usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
>   usb: musb: tusb6010_omap: Allocate DMA channels upfront
>   usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
>   ARM: OMAP2+: DMA: Add slave map entries for 24xx external request
>     lines
>   usb: musb: tusb6010_omap: Convert to DMAengine API
> 
>  arch/arm/mach-omap2/dma.c        |  24 +++
>  drivers/dma/omap-dma.c           |  39 ++--
>  drivers/usb/musb/musb_core.c     |   3 +
>  drivers/usb/musb/musb_core.h     |   1 +
>  drivers/usb/musb/tusb6010.c      |  21 +--
>  drivers/usb/musb/tusb6010_omap.c | 379 ++++++++++++++++-----------------------
>  6 files changed, 203 insertions(+), 264 deletions(-)
> 

Applied. Thanks.
-Bin.

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux