On Mon, 22 May 2017, Tony Lindgren wrote: > This driver is no longer needed and can be removed. The reason why > it's safe to remove this driver is that most omap devices don't have a > USB low-speed or full-speed compatible PHY installed and configured > with drivers/mfd/omap-usb-host.c. This means that devices like > beagleboard and pandaboard need to use a high-speed USB hub in order > to use devices like keyboard and mice. > > Currently the only known configured for a full-speed PHY is the > mdm6600 modem on droid 4 and I've verified it works just fine with > ohci-platform. > > Cc: Roger Quadros <rogerq@xxxxxx> > Cc: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx> > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> > --- > drivers/usb/host/Kconfig | 6 +- > drivers/usb/host/Makefile | 1 - > drivers/usb/host/ohci-omap3.c | 211 ------------------------------------------ > 3 files changed, 5 insertions(+), 213 deletions(-) > delete mode 100644 drivers/usb/host/ohci-omap3.c > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -473,8 +473,12 @@ config USB_OHCI_HCD_AT91 > config USB_OHCI_HCD_OMAP3 > tristate "OHCI support for OMAP3 and later chips" > depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5) > + select USB_OHCI_HCD_PLATFORM > default y > - ---help--- > + help > + This option is deprecated now and the driver was removed, use > + USB_OHCI_HCD_PLATFORM instead. > + > Enables support for the on-chip OHCI controller on > OMAP3 and later chips. > ... Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
