I'm having this issue on kernel 4.11.0 and 4.11.1. It usually happens after a while of ordinary USB use. Afterwards, USB does not work. If I rmmod all the modules and reinsert them, it works for a while, but even sooner after it stops working again. [48112.422418] ------------[ cut here ]------------ [48112.422441] WARNING: CPU: 0 PID: 14420 at drivers/usb/host/xhci-ring.c:1390 handle_cmd_completion+0xb17/0xc00 [xhci_hcd] [48112.422446] Modules linked in: xt_hashlimit ip6_udp_tunnel udp_tunnel rfcomm pl2303 hid_lenovo bnep cdc_mbim cdc_ncm qcserial cdc_wdm usb_wwan usbnet usbserial mii uvcvideo videobuf2_vmalloc videobuf2_memops [48112.422480] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [48112.422481] videobuf2_v4l2 videobuf2_core cdc_acm videodev btusb btintel usbhid bluetooth af_packet nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter xt_hl nf_conntrack_ipv6 nf_defrag_ipv6 xt_multiport 8021q xt_conntrack nf_conntrack ip6table_filter ip6_tables algif_skcipher joydev mousedev snd_hda_codec_realtek snd_hda_codec_generic arc4 iwlmvm mac80211 rtsx_pci_sdmmc mmc_core intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iwlwifi snd_hda_intel ahci irqbypass snd_hda_codec crc32_pclmul snd_hwdep xhci_pci xhci_hcd libahci crc32c_intel snd_hda_core mei_me cfg80211 usbcore snd_pcm rtsx_pci ie31200_edac input_leds mfd_core e1000e libata usb_common mei snd_timer psmouse edac_core intel_pch_thermal thinkpad_acpi snd soundcore led_class rfkill tpm_tis tpm_tis_core evdev [48112.422556] tpm sch_fq_codel [48112.422565] CPU: 0 PID: 14420 Comm: kworker/0:7 Tainted: P W O 4.11.1-gentoo #1 [48112.422567] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET65W (1.38 ) 02/09/2017 [48112.422577] Workqueue: events xhci_handle_command_timeout [xhci_hcd] [48112.422580] Call Trace: [48112.422583] <IRQ> [48112.422589] ? dump_stack+0x46/0x5e [48112.422595] ? __warn+0xb9/0xe0 [48112.422603] ? handle_cmd_completion+0xb17/0xc00 [xhci_hcd] [48112.422609] ? try_to_wake_up+0x22e/0x390 [48112.422617] ? xhci_irq+0x38f/0x1460 [xhci_hcd] [48112.422624] ? run_timer_softirq.part.2+0x4c/0xa0 [48112.422629] ? expire_timers+0x6e/0xe0 [48112.422634] ? __handle_irq_event_percpu+0x36/0x190 [48112.422637] ? handle_irq_event_percpu+0x1b/0x50 [48112.422640] ? handle_irq_event+0x22/0x40 [48112.422644] ? handle_edge_irq+0x65/0x120 [48112.422649] ? handle_irq+0x11/0x20 [48112.422653] ? do_IRQ+0x3c/0xc0 [48112.422658] ? common_interrupt+0x7f/0x7f [48112.422660] </IRQ> [48112.422664] ? _raw_spin_unlock_irqrestore+0x5/0x10 [48112.422671] ? xhci_handle_command_timeout+0xf4/0x1b0 [xhci_hcd] [48112.422684] ? process_one_work+0x1d9/0x450 [48112.422689] ? worker_thread+0x42/0x4b0 [48112.422695] ? process_one_work+0x450/0x450 [48112.422698] ? kthread+0x112/0x130 [48112.422702] ? kthread_create_on_node+0x40/0x40 [48112.422705] ? ret_from_fork+0x23/0x30 [48112.422709] ---[ end trace eb9505885b6e349e ]--- [48113.446247] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command. [48113.446250] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host. [48113.446348] xhci_hcd 0000:00:14.0: HC died; cleaning up -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
