Fix a division-by-zero in set_termios when debugging is enabled and a
high-enough speed has been requested so that the divisor value becomes
zero.
Instead of just fixing the offending debug statement, cap the baud rate
at the base as a zero divisor value also appears to crash the firmware.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@xxxxxxxxxxxxxxx> # 2.6.12
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/io_ti.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 87798e625d6c..6cefb9cb133d 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2336,8 +2336,11 @@ static void change_port_settings(struct tty_struct *tty,
if (!baud) {
/* pick a default, any default... */
baud = 9600;
- } else
+ } else {
+ /* Avoid a zero divisor. */
+ baud = min(baud, 461550);
tty_encode_baud_rate(tty, baud, baud);
+ }
edge_port->baud_rate = baud;
config->wBaudRate = (__u16)((461550L + baud/2) / baud);
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
