On Mon, 17 Apr 2017, Andreas Hartmann wrote:
> > Good start, but there are five (!) other places in this driver where
> > the same bug occurs, at lines 904, 1350, 1577, 2088, and 2157. Would
> > you like to fix them too?
> >
> > Maybe it would be easier for the driver to allocate a single 512-byte
> > buffer at the start, and use it for all of these I/O requests.
>
> Yes, it doesn't work yet:
Okay, please try this patch instead.
Alan Stern
Index: usb-4.x/drivers/usb/storage/ene_ub6250.c
===================================================================
--- usb-4.x.orig/drivers/usb/storage/ene_ub6250.c
+++ usb-4.x/drivers/usb/storage/ene_ub6250.c
@@ -446,6 +446,10 @@ struct ms_lib_ctrl {
#define SD_BLOCK_LEN 9
struct ene_ub6250_info {
+
+ /* I/O bounce buffer */
+ u8 *bbuf;
+
/* for 6250 code */
struct SD_STATUS SD_Status;
struct MS_STATUS MS_Status;
@@ -493,8 +497,11 @@ static int ene_load_bincode(struct us_da
static void ene_ub6250_info_destructor(void *extra)
{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra;
+
if (!extra)
return;
+ kfree(info->bbuf);
}
static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
@@ -860,8 +867,9 @@ static int ms_read_readpage(struct us_da
u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
int result;
- u8 ExtBuf[4];
u32 bn = PhyBlockAddr * 0x20 + PageNum;
result = ene_load_bincode(us, MS_RW_PATTERN);
@@ -901,7 +909,7 @@ static int ms_read_readpage(struct us_da
bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16);
bcb->CDB[6] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -910,9 +918,9 @@ static int ms_read_readpage(struct us_da
ExtraDat->status0 = 0x10; /* Not yet,fireware support */
ExtraDat->status1 = 0x00; /* Not yet,fireware support */
- ExtraDat->ovrflg = ExtBuf[0];
- ExtraDat->mngflg = ExtBuf[1];
- ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+ ExtraDat->ovrflg = bbuf[0];
+ ExtraDat->mngflg = bbuf[1];
+ ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]);
return USB_STOR_TRANSPORT_GOOD;
}
@@ -1332,8 +1340,9 @@ static int ms_lib_read_extra(struct us_d
u8 PageNum, struct ms_lib_type_extdat *ExtraDat)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
int result;
- u8 ExtBuf[4];
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
@@ -1347,7 +1356,7 @@ static int ms_lib_read_extra(struct us_d
bcb->CDB[2] = (unsigned char)(PhyBlock>>16);
bcb->CDB[6] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1355,9 +1364,9 @@ static int ms_lib_read_extra(struct us_d
ExtraDat->intr = 0x80; /* Not yet, waiting for fireware support */
ExtraDat->status0 = 0x10; /* Not yet, waiting for fireware support */
ExtraDat->status1 = 0x00; /* Not yet, waiting for fireware support */
- ExtraDat->ovrflg = ExtBuf[0];
- ExtraDat->mngflg = ExtBuf[1];
- ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+ ExtraDat->ovrflg = bbuf[0];
+ ExtraDat->mngflg = bbuf[1];
+ ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]);
return USB_STOR_TRANSPORT_GOOD;
}
@@ -1558,9 +1567,9 @@ static int ms_lib_scan_logicalblocknumbe
u16 PhyBlock, newblk, i;
u16 LogStart, LogEnde;
struct ms_lib_type_extdat extdat;
- u8 buf[0x200];
u32 count = 0, index = 0;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) {
ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde);
@@ -1574,14 +1583,16 @@ static int ms_lib_scan_logicalblocknumbe
}
if (count == PhyBlock) {
- ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf);
+ ms_lib_read_extrablock(us, PhyBlock, 0, 0x80,
+ bbuf);
count += 0x80;
}
index = (PhyBlock % 0x80) * 4;
- extdat.ovrflg = buf[index];
- extdat.mngflg = buf[index+1];
- extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]);
+ extdat.ovrflg = bbuf[index];
+ extdat.mngflg = bbuf[index+1];
+ extdat.logadr = memstick_logaddr(bbuf[index+2],
+ bbuf[index+3]);
if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
ms_lib_setacquired_errorblock(us, PhyBlock);
@@ -2064,9 +2075,9 @@ static int ene_ms_init(struct us_data *u
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result;
- u8 buf[0x200];
u16 MSP_BlockSize, MSP_UserAreaBlocks;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
printk(KERN_INFO "transport --- ENE_MSInit\n");
@@ -2085,13 +2096,13 @@ static int ene_ms_init(struct us_data *u
bcb->CDB[0] = 0xF1;
bcb->CDB[1] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD) {
printk(KERN_ERR "Execution MS Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
/* the same part to test ENE */
- info->MS_Status = *(struct MS_STATUS *)&buf[0];
+ info->MS_Status = *(struct MS_STATUS *) bbuf;
if (info->MS_Status.Insert && info->MS_Status.Ready) {
printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert);
@@ -2100,15 +2111,15 @@ static int ene_ms_init(struct us_data *u
printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG);
printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
if (info->MS_Status.IsMSPro) {
- MSP_BlockSize = (buf[6] << 8) | buf[7];
- MSP_UserAreaBlocks = (buf[10] << 8) | buf[11];
+ MSP_BlockSize = (bbuf[6] << 8) | bbuf[7];
+ MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
} else {
ms_card_init(us); /* Card is MS (to ms.c)*/
}
usb_stor_dbg(us, "MS Init Code OK !!\n");
} else {
- usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]);
+ usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
@@ -2118,9 +2129,9 @@ static int ene_ms_init(struct us_data *u
static int ene_sd_init(struct us_data *us)
{
int result;
- u8 buf[0x200];
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
usb_stor_dbg(us, "transport --- ENE_SDInit\n");
/* SD Init Part-1 */
@@ -2154,17 +2165,17 @@ static int ene_sd_init(struct us_data *u
bcb->Flags = US_BULK_FLAG_IN;
bcb->CDB[0] = 0xF1;
- result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
- info->SD_Status = *(struct SD_STATUS *)&buf[0];
+ info->SD_Status = *(struct SD_STATUS *) bbuf;
if (info->SD_Status.Insert && info->SD_Status.Ready) {
struct SD_STATUS *s = &info->SD_Status;
- ene_get_card_status(us, (unsigned char *)&buf);
+ ene_get_card_status(us, bbuf);
usb_stor_dbg(us, "Insert = %x\n", s->Insert);
usb_stor_dbg(us, "Ready = %x\n", s->Ready);
usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC);
@@ -2172,7 +2183,7 @@ static int ene_sd_init(struct us_data *u
usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed);
usb_stor_dbg(us, "WtP = %x\n", s->WtP);
} else {
- usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]);
+ usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
return USB_STOR_TRANSPORT_GOOD;
@@ -2182,13 +2193,15 @@ static int ene_sd_init(struct us_data *u
static int ene_init(struct us_data *us)
{
int result;
- u8 misc_reg03 = 0;
+ u8 misc_reg03;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+ u8 *bbuf = info->bbuf;
- result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+ result = ene_get_card_type(us, REG_CARD_STATUS, bbuf);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
+ misc_reg03 = bbuf[0];
if (misc_reg03 & 0x01) {
if (!info->SD_Status.Ready) {
result = ene_sd_init(us);
@@ -2305,8 +2318,9 @@ static int ene_ub6250_probe(struct usb_i
const struct usb_device_id *id)
{
int result;
- u8 misc_reg03 = 0;
+ u8 misc_reg03;
struct us_data *us;
+ struct ene_ub6250_info *info;
result = usb_stor_probe1(&us, intf, id,
(id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list,
@@ -2315,11 +2329,16 @@ static int ene_ub6250_probe(struct usb_i
return result;
/* FIXME: where should the code alloc extra buf ? */
- if (!us->extra) {
- us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
- if (!us->extra)
- return -ENOMEM;
- us->extra_destructor = ene_ub6250_info_destructor;
+ us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
+ if (!us->extra)
+ return -ENOMEM;
+ us->extra_destructor = ene_ub6250_info_destructor;
+
+ info = (struct ene_ub6250_info *)(us->extra);
+ info->bbuf = kmalloc(512, GFP_KERNEL);
+ if (!info->bbuf) {
+ kfree(us->extra);
+ return -ENOMEM;
}
us->transport_name = "ene_ub6250";
@@ -2331,12 +2350,13 @@ static int ene_ub6250_probe(struct usb_i
return result;
/* probe card type */
- result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+ result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_disconnect(intf);
return USB_STOR_TRANSPORT_ERROR;
}
+ misc_reg03 = info->bbuf[0];
if (!(misc_reg03 & 0x01)) {
pr_info("ums_eneub6250: This driver only supports SD/MS cards. "
"It does not support SM cards.\n");
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
