On 04/13/17 05:33, Alexey Brodkin wrote: > DWC3 driver uses of_usb_get_phy_mode() which is > implemented in drivers/usb/phy/of.c and in bare minimal > configuration it might not be pulled in kernel binary. > > In case of ARC or ARM this could be easily reproduced with > "allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m. > > On building all ends-up with: > ---------------------->8------------------ > Kernel: arch/arm/boot/Image is ready > Kernel: arch/arm/boot/zImage is ready > Building modules, stage 2. > MODPOST 5 modules > ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined! > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 > ---------------------->8------------------ > > Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx> > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> > Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > Cc: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx> > Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> > Cc: Felipe Balbi <balbi@xxxxxxxxxx> > Cc: Felix Fietkau <nbd@xxxxxxxx> > Cc: Jeremy Kerr <jk@xxxxxxxxxx> > Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx > Cc: stable@xxxxxxxxxxxxxxx > --- > drivers/Makefile | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/Makefile b/drivers/Makefile > index 2eced9afba53..8f8bdc9e3d29 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -104,6 +104,7 @@ obj-$(CONFIG_USB_PHY) += usb/ > obj-$(CONFIG_USB) += usb/ > obj-$(CONFIG_PCI) += usb/ > obj-$(CONFIG_USB_GADGET) += usb/ > +obj-$(CONFIG_OF) += usb/ Would CONFIG_USB_SUPPORT make more sense? (And does it work?) > obj-$(CONFIG_SERIO) += input/serio/ > obj-$(CONFIG_GAMEPORT) += input/gameport/ > obj-$(CONFIG_INPUT) += input/ > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html