[PATCH 9/9] usbip: vhci-hcd: Clean up the code by adding a new macro

[Yuyang Du <yuyang.du@xxxxxxxxx>]

Each vhci has 2*VHCI_HC_PORTS ports, in which VHCI_HC_PORTS
ports are HighSpeed (or below), and VHCI_HC_PORTS are SuperSpeed.
This new macro VHCI_PORTS reflects this configuration.

Signed-off-by: Yuyang Du <yuyang.du@xxxxxxxxx>
---
 drivers/usb/usbip/vhci.h       |  5 ++++-
 drivers/usb/usbip/vhci_sysfs.c | 10 +++++-----
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h
index db28eb5..5cfb59e 100644
--- a/drivers/usb/usbip/vhci.h
+++ b/drivers/usb/usbip/vhci.h
@@ -84,6 +84,9 @@ enum hub_speed {
 #define VHCI_HC_PORTS 8
 #endif
 
+/* Each VHCI has 2 hubs (USB2 and USB3), each has VHCI_HC_PORTS ports */
+#define VHCI_PORTS	(VHCI_HC_PORTS*2)
+
 #ifdef CONFIG_USBIP_VHCI_NR_HCS
 #define VHCI_NR_HCS CONFIG_USBIP_VHCI_NR_HCS
 #else
@@ -145,7 +148,7 @@ static inline __u32 port_to_rhport(__u32 port)
 
 static inline int port_to_pdev_nr(__u32 port)
 {
-	return port / (VHCI_HC_PORTS * 2);
+	return port / VHCI_PORTS;
 }
 
 static inline struct vhci_hcd *hcd_to_vhci_hcd(struct usb_hcd *hcd)
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
index 3ad68ff..5778b64 100644
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -92,7 +92,7 @@ static ssize_t status_show_vhci(int pdev_nr, char *out)
 
 		spin_lock(&vdev->ud.lock);
 		port_show_vhci(&out, HUB_SPEED_HIGH,
-			       pdev_nr * VHCI_HC_PORTS * 2 + i, vdev);
+			       pdev_nr * VHCI_PORTS + i, vdev);
 		spin_unlock(&vdev->ud.lock);
 	}
 
@@ -101,7 +101,7 @@ static ssize_t status_show_vhci(int pdev_nr, char *out)
 
 		spin_lock(&vdev->ud.lock);
 		port_show_vhci(&out, HUB_SPEED_SUPER,
-			       pdev_nr * VHCI_HC_PORTS * 2 + VHCI_HC_PORTS + i, vdev);
+			       pdev_nr * VHCI_PORTS + VHCI_HC_PORTS + i, vdev);
 		spin_unlock(&vdev->ud.lock);
 	}
 
@@ -117,7 +117,7 @@ static ssize_t status_show_not_ready(int pdev_nr, char *out)
 
 	for (i = 0; i < VHCI_HC_PORTS; i++) {
 		out += sprintf(out, "hs  %04u %03u ",
-				    (pdev_nr * VHCI_HC_PORTS * 2) + i,
+				    (pdev_nr * VHCI_PORTS) + i,
 				    VDEV_ST_NOTASSIGNED);
 		out += sprintf(out, "000 00000000 0000000000000000 0-0");
 		out += sprintf(out, "\n");
@@ -125,7 +125,7 @@ static ssize_t status_show_not_ready(int pdev_nr, char *out)
 
 	for (i = 0; i < VHCI_HC_PORTS; i++) {
 		out += sprintf(out, "ss  %04u %03u ",
-				    (pdev_nr * VHCI_HC_PORTS * 2) + VHCI_HC_PORTS + i,
+				    (pdev_nr * VHCI_PORTS) + VHCI_HC_PORTS + i,
 				    VDEV_ST_NOTASSIGNED);
 		out += sprintf(out, "000 00000000 0000000000000000 0-0");
 		out += sprintf(out, "\n");
@@ -176,7 +176,7 @@ static ssize_t nports_show(struct device *dev, struct device_attribute *attr,
 	/*
 	 * Half the ports are for SPEED_HIGH and half for SPEED_SUPER, thus the * 2.
 	 */
-	out += sprintf(out, "%d\n", VHCI_HC_PORTS * vhci_num_controllers * 2);
+	out += sprintf(out, "%d\n", VHCI_PORTS * vhci_num_controllers);
 	return out - s;
 }
 static DEVICE_ATTR_RO(nports);
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html