There are several inconsistencies in the error handling code.
1. If clk_get() fails, it goes to clk_put().
2. If pdata->phy_init() fails, it does not disable u3d->clk.
3. In case of failure after stopping u3d, it does pdata->phy_deinit()
and clk_disable(u3d->clk) twice.
4. It ignores failures in clk_enable().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
---
drivers/usb/gadget/udc/mv_u3d_core.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index d365449a295a..772049afe166 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1835,13 +1835,18 @@ static int mv_u3d_probe(struct platform_device *dev)
}
/* we will access controller register, so enable the u3d controller */
- clk_enable(u3d->clk);
+ retval = clk_enable(u3d->clk);
+ if (retval) {
+ dev_err(&dev->dev, "clk_enable error %d\n", retval);
+ goto err_u3d_enable;
+ }
if (pdata->phy_init) {
retval = pdata->phy_init(u3d->phy_regs);
if (retval) {
dev_err(&dev->dev, "init phy error %d\n", retval);
- goto err_u3d_enable;
+ clk_disable(u3d->clk);
+ goto err_phy_init;
}
}
@@ -1974,15 +1979,13 @@ static int mv_u3d_probe(struct platform_device *dev)
dma_free_coherent(&dev->dev, u3d->ep_context_size,
u3d->ep_context, u3d->ep_context_dma);
err_alloc_ep_context:
- if (pdata->phy_deinit)
- pdata->phy_deinit(u3d->phy_regs);
- clk_disable(u3d->clk);
+err_phy_init:
err_u3d_enable:
iounmap(u3d->cap_regs);
err_map_cap_regs:
err_get_cap_regs:
-err_get_clk:
clk_put(u3d->clk);
+err_get_clk:
kfree(u3d);
err_alloc_private:
err_pdata:
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
