I had seen some odd behavior with HiKey's usb-gadget interface that I finally seemed to have chased down. Basically every other time I plugged in the OTG port, the gadget interface would properly initialize. The other times, I'd get a big WARN_ON in dwc2_hsotg_init_fifo() about the fifo_map not being clear. Ends up if we don't disconnect the gadget state, the fifo-map doesn't get cleared properly, which causes WARN_ON messages and also results in the device not properly being setup as a gadget every other time the OTG port is connected. So this patch adds a call to dwc2_hsotg_disconnect() in the reset path so the state is properly cleared. With it, the gadget interface initializes properly on every plug in. Cc: Wei Xu <xuwei5@xxxxxxxxxxxxx> Cc: Guodong Xu <guodong.xu@xxxxxxxxxx> Cc: Amit Pundir <amit.pundir@xxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: John Youn <johnyoun@xxxxxxxxxxxx> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx> Cc: Chen Yu <chenyu56@xxxxxxxxxx> Cc: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: linux-usb@xxxxxxxxxxxxxxx Acked-by: John Youn <johnyoun@xxxxxxxxxxxx> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx> --- v2: Minor typo fix suggested by Sergei Shtylyov --- drivers/usb/dwc2/hcd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index a73722e..91ed5b6 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3264,6 +3264,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work) dwc2_core_init(hsotg, false); dwc2_enable_global_interrupts(hsotg); spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_disconnect(hsotg); dwc2_hsotg_core_init_disconnected(hsotg, false); spin_unlock_irqrestore(&hsotg->lock, flags); dwc2_hsotg_core_connect(hsotg); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
