On 17-03-12 23:16:25, Philippe Reynes wrote:
> The ethtool api {get|set}_settings is deprecated.
> We move this driver to new api {get|set}_link_ksettings.
>
> As I don't have the hardware, I'd be very pleased if someone may test this
> patch.
I've got some old adapters around and will drop you a line when i test the
patch.
Petko
> Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
> ---
> drivers/net/usb/rtl8150.c | 35 ++++++++++++++++++++---------------
> 1 files changed, 20 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
> index c81c791..daaa88a 100644
> --- a/drivers/net/usb/rtl8150.c
> +++ b/drivers/net/usb/rtl8150.c
> @@ -791,47 +791,52 @@ static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinf
> usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
> }
>
> -static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
> +static int rtl8150_get_link_ksettings(struct net_device *netdev,
> + struct ethtool_link_ksettings *ecmd)
> {
> rtl8150_t *dev = netdev_priv(netdev);
> short lpa, bmcr;
> + u32 supported;
>
> - ecmd->supported = (SUPPORTED_10baseT_Half |
> + supported = (SUPPORTED_10baseT_Half |
> SUPPORTED_10baseT_Full |
> SUPPORTED_100baseT_Half |
> SUPPORTED_100baseT_Full |
> SUPPORTED_Autoneg |
> SUPPORTED_TP | SUPPORTED_MII);
> - ecmd->port = PORT_TP;
> - ecmd->transceiver = XCVR_INTERNAL;
> - ecmd->phy_address = dev->phy;
> + ecmd->base.port = PORT_TP;
> + ecmd->base.phy_address = dev->phy;
> get_registers(dev, BMCR, 2, &bmcr);
> get_registers(dev, ANLP, 2, &lpa);
> if (bmcr & BMCR_ANENABLE) {
> u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
> SPEED_100 : SPEED_10);
> - ethtool_cmd_speed_set(ecmd, speed);
> - ecmd->autoneg = AUTONEG_ENABLE;
> + ecmd->base.speed = speed;
> + ecmd->base.autoneg = AUTONEG_ENABLE;
> if (speed == SPEED_100)
> - ecmd->duplex = (lpa & LPA_100FULL) ?
> + ecmd->base.duplex = (lpa & LPA_100FULL) ?
> DUPLEX_FULL : DUPLEX_HALF;
> else
> - ecmd->duplex = (lpa & LPA_10FULL) ?
> + ecmd->base.duplex = (lpa & LPA_10FULL) ?
> DUPLEX_FULL : DUPLEX_HALF;
> } else {
> - ecmd->autoneg = AUTONEG_DISABLE;
> - ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
> - SPEED_100 : SPEED_10));
> - ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
> + ecmd->base.autoneg = AUTONEG_DISABLE;
> + ecmd->base.speed = ((bmcr & BMCR_SPEED100) ?
> + SPEED_100 : SPEED_10);
> + ecmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
> DUPLEX_FULL : DUPLEX_HALF;
> }
> +
> + ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
> + supported);
> +
> return 0;
> }
>
> static const struct ethtool_ops ops = {
> .get_drvinfo = rtl8150_get_drvinfo,
> - .get_settings = rtl8150_get_settings,
> - .get_link = ethtool_op_get_link
> + .get_link = ethtool_op_get_link,
> + .get_link_ksettings = rtl8150_get_link_ksettings,
> };
>
> static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
> --
> 1.7.4.4
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
