Rename oc-delay-* to oc-delay-us and make it expect a time value. Furthermore add -ms suffix to power-on-time. There changes were suggested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxxxx> --- Documentation/devicetree/bindings/usb/usb251xb.txt | 10 ++++--- drivers/usb/misc/usb251xb.c | 35 ++++++++++++---------- 2 files changed, 26 insertions(+), 19 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index a5efd10..91499ae 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -31,7 +31,9 @@ Optional properties : (default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered operation if the local power source is removed or unavailable - - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms) + - oc-delay-us : Delay time (in microseconds) for filtering the over-current + sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If + an invalid value is given, the default is used instead. - compound-device : indicated the hub is part of a compound device - port-mapping-mode : enable port mapping mode - string-support : enable string descriptor support (required for manufacturer, @@ -40,9 +42,9 @@ Optional properties : device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - power-on-time : Specifies the time it takes from the time the host initiates - the power-on sequence to a port until the port has adequate power. The - value is given in ms in a 0 - 510 range (default is 100ms). + - power-on-time-ms : Specifies the time it takes from the time the host + initiates the power-on sequence to a port until the port has adequate + power. The value is given in ms in a 0 - 510 range (default is 100ms). Examples: usb2512b@2c { diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 3f9c306..91f66d68 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -375,18 +375,24 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, if (of_get_property(np, "dynamic-power-switching", NULL)) hub->conf_data2 |= BIT(7); - if (of_get_property(np, "oc-delay-100us", NULL)) { - hub->conf_data2 &= ~BIT(5); - hub->conf_data2 &= ~BIT(4); - } else if (of_get_property(np, "oc-delay-4ms", NULL)) { - hub->conf_data2 &= ~BIT(5); - hub->conf_data2 |= BIT(4); - } else if (of_get_property(np, "oc-delay-8ms", NULL)) { - hub->conf_data2 |= BIT(5); - hub->conf_data2 &= ~BIT(4); - } else if (of_get_property(np, "oc-delay-16ms", NULL)) { - hub->conf_data2 |= BIT(5); - hub->conf_data2 |= BIT(4); + if (!of_property_read_u32(np, "oc-delay-us", property_u32)) { + if (*property_u32 == 100) { + /* 100 us*/ + hub->conf_data2 &= ~BIT(5); + hub->conf_data2 &= ~BIT(4); + } else if (*property_u32 == 4000) { + /* 4 ms */ + hub->conf_data2 &= ~BIT(5); + hub->conf_data2 |= BIT(4); + } else if (*property_u32 == 16000) { + /* 16 ms */ + hub->conf_data2 |= BIT(5); + hub->conf_data2 |= BIT(4); + } else { + /* 8 ms (DEFAULT) */ + hub->conf_data2 |= BIT(5); + hub->conf_data2 &= ~BIT(4); + } } if (of_get_property(np, "compound-device", NULL)) @@ -433,9 +439,8 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, } hub->power_on_time = USB251XB_DEF_POWER_ON_TIME; - if (!of_property_read_u32(np, "power-on-time", property_u32)) - hub->power_on_time = min_t(u8, be32_to_cpu(*property_u32) / 2, - 255); + if (!of_property_read_u32(np, "power-on-time-ms", property_u32)) + hub->power_on_time = min_t(u8, *property_u32 / 2, 255); if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1)) hub->lang_id = USB251XB_DEF_LANGUAGE_ID; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
