Re: [PATCH v2 2/3] Documentation: bindings: add DT documentation for u2phy and u2phy grf

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Freitag, 3. März 2017, 00:21:56 CET schrieb Rob Herring:
> On Thu, Mar 02, 2017 at 03:49:04PM +0800, Meng Dongyang wrote:
> > Due to the u2phy registers are separated from general grf, we need to
> > add u2phy grf node and place u2phy node in it. So this patch add u2phy
> > grf node.
> 
> Similar comment on the subject.
> 
> > Changes in v2:
> >  - add u2phy grf specification
> > 
> > Signed-off-by: Meng Dongyang <daniel.meng@xxxxxxxxxxxxxx>
> > ---
> > 
> >  Documentation/devicetree/bindings/soc/rockchip/grf.txt | 15
> >  +++++++++++++++
> >  1 file changed, 15 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
> > b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index
> > 013e71a..6ac23f9 100644
> > --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
> > +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
> > @@ -7,6 +7,9 @@ From RK3368 SoCs, the GRF is divided into two sections,
> > 
> >  - GRF, used for general non-secure system,
> >  - PMUGRF, used for always on system
> > 
> > +On RK3328 SoCs, the GRF is divided into three sections,
> > +except GRF and PMUGRF, add a section for USB2PHYGRF,
> > +
> > 
> >  Required Properties:
> >  
> >  - compatible: GRF should be one of the followings
> > 
> > @@ -19,6 +22,8 @@ Required Properties:
> >  - compatible: PMUGRF should be one of the followings
> >  
> >     - "rockchip,rk3368-pmugrf", "syscon": for rk3368
> >     - "rockchip,rk3399-pmugrf", "syscon": for rk3399
> > 
> > +- compatible: USB2GRF should be one of the followings
> > +   - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
> > 
> >  - reg: physical base address of the controller and length of memory
> >  mapped
> >  
> >    region.
> > 
> > @@ -33,3 +38,13 @@ Example: GRF and PMUGRF of RK3399 SoCs
> > 
> >  		compatible = "rockchip,rk3399-grf", "syscon";
> >  		reg = <0x0 0xff770000 0x0 0x10000>;
> >  	
> >  	};
> > 
> > +
> > +Example: USB2GRF of RK3328 SoCs
> > +
> > +	usb2phy_grf: syscon@ff450000 {
> > +		compatible = "rockchip,rk3328-usb2phy-grf", "syscon",
> > +			     "simple-mfd";
> 
> simple-mfd is not documented. Do you have child nodes?

Yes, this will have child nodes and I guess we don't really need the 
additional example, that only differs in the compatible.


> What makes this a syscon? It has non-PHY registers?

It is still a "General Register Files" block in all of the socs manual
and yes, that special area also contains registers not used by the phy driver.


Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux