[Kernel] usbhid 3-2:1.1: couldn't find an input interrupt endpoint

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

dmesg:
[    2.465370] usbhid 3-2:1.1: couldn't find an input interrupt endpoint

Thanks,
-- 
Cristian
[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Linux version 4.10.0-041000-generic (kernel@gloin) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #201702191831 SMP Sun Feb 19 23:33:19 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.10.0-041000-generic root=UUID=4f4435ca-b877-47a5-9065-3dd624c0514e ro rootflags=subvol=@ quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c42a9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c42aa000-0x00000000c44abfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c44ac000-0x00000000d33eefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d33ef000-0x00000000daeeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031f5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000031f600000-0x000000031f7fffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C/SAMSUNG_NP1234567890, BIOS P14AAJ 04/15/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x31f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask F00000000 write-back
[    0.000000]   8 base 300000000 mask FE0000000 write-back
[    0.000000]   9 base 31F800000 mask FFF800000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff9448000f0100]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff944800097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x263a27000, 0x263a27fff] PGTABLE
[    0.000000] BRK [0x263a28000, 0x263a28fff] PGTABLE
[    0.000000] BRK [0x263a29000, 0x263a29fff] PGTABLE
[    0.000000] BRK [0x263a2a000, 0x263a2afff] PGTABLE
[    0.000000] BRK [0x263a2b000, 0x263a2bfff] PGTABLE
[    0.000000] BRK [0x263a2c000, 0x263a2cfff] PGTABLE
[    0.000000] BRK [0x263a2d000, 0x263a2dfff] PGTABLE
[    0.000000] BRK [0x263a2e000, 0x263a2efff] PGTABLE
[    0.000000] BRK [0x263a2f000, 0x263a2ffff] PGTABLE
[    0.000000] BRK [0x263a30000, 0x263a30fff] PGTABLE
[    0.000000] BRK [0x263a31000, 0x263a31fff] PGTABLE
[    0.000000] BRK [0x263a32000, 0x263a32fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33085000-0x35839fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 0x00000000DAFFE170 000094 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: FACP 0x00000000DAFEE000 00010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DAFF1000 0092DA (v02 SECCSD IVB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAF7B000 000040
[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000DAFF0000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 0x00000000DAFED000 000038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DAFEC000 000098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DAFEB000 00003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: FPDT 0x00000000DAFEA000 000054 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000DAFE9000 0007D7 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFE8000 000AD0 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000DAFE7000 00003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x00000000DAF78000 000055 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFE5000 00027E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000031f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x31f5cd000-0x31f5f7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000031f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000c42a9fff]
[    0.000000]   node   0: [mem 0x00000000c44ac000-0x00000000d33eefff]
[    0.000000]   node   0: [mem 0x00000000dafff000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000031f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031f5fffff]
[    0.000000] On node 0 totalpages: 3089290
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13432 pages used for memmap
[    0.000000]   DMA32 zone: 859630 pages, LIFO batch:31
[    0.000000]   Normal zone: 34776 pages used for memmap
[    0.000000]   Normal zone: 2225664 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc42aa000-0xc44abfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd33ef000-0xdaeeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff944b1f200000 s107800 r8192 d31464 u262144
[    0.000000] pcpu-alloc: s107800 r8192 d31464 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3040862
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.10.0-041000-generic root=UUID=4f4435ca-b877-47a5-9065-3dd624c0514e ro rootflags=subvol=@ quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12031212K/12357160K available (8936K kernel code, 1660K rwdata, 3852K rodata, 2228K init, 2364K bss, 325948K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:524544 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1496.711 MHz processor
[    0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.42 BogoMIPS (lpj=5986844)
[    0.000044] pid_max: default: 32768 minimum: 301
[    0.000059] ACPI: Core revision 20160930
[    0.009360] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.009403] Security Framework initialized
[    0.009404] Yama: becoming mindful.
[    0.009414] AppArmor: AppArmor initialized
[    0.010774] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.015831] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.018048] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018071] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018495] CPU: Physical Processor ID: 0
[    0.018496] CPU: Processor Core ID: 0
[    0.018502] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.018503] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.018505] mce: CPU supports 7 MCE banks
[    0.018516] CPU0: Thermal monitoring enabled (TM1)
[    0.018530] process: using mwait in idle threads
[    0.018534] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.018535] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.018749] Freeing SMP alternatives memory: 32K
[    0.022185] ftrace: allocating 33919 entries in 133 pages
[    0.049194] smpboot: Max logical packages: 4
[    0.049276] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.049735] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.089426] TSC deadline timer enabled
[    0.089430] smpboot: CPU0: Intel(R) Core(TM) i3-2377M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.089508] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.089541] ... version:                3
[    0.089542] ... bit width:              48
[    0.089542] ... generic registers:      4
[    0.089543] ... value mask:             0000ffffffffffff
[    0.089544] ... max period:             00007fffffffffff
[    0.089545] ... fixed-purpose events:   3
[    0.089546] ... event mask:             000000070000000f
[    0.090835] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.090861] smp: Bringing up secondary CPUs ...
[    0.090982] x86: Booting SMP configuration:
[    0.090983] .... node  #0, CPUs:      #1 #2 #3
[    0.331622] smp: Brought up 1 node, 4 CPUs
[    0.331625] smpboot: Total of 4 processors activated (11977.10 BogoMIPS)
[    0.336676] devtmpfs: initialized
[    0.336767] x86/mm: Memory block size: 128MB
[    0.343722] evm: security.selinux
[    0.343723] evm: security.SMACK64
[    0.343723] evm: security.SMACK64EXEC
[    0.343724] evm: security.SMACK64TRANSMUTE
[    0.343725] evm: security.SMACK64MMAP
[    0.343725] evm: security.ima
[    0.343726] evm: security.capability
[    0.343844] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes)
[    0.343947] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.343973] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.344041] pinctrl core: initialized pinctrl subsystem
[    0.344198] RTC time: 15:13:29, date: 02/20/17
[    0.344331] NET: Registered protocol family 16
[    0.359994] cpuidle: using governor ladder
[    0.372007] cpuidle: using governor menu
[    0.372010] PCCT header not found.
[    0.372104] ACPI: bus type PCI registered
[    0.372106] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.372204] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.372254] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.372265] PCI: Using configuration type 1 for base access
[    0.372351] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.384269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.384617] ACPI: Added _OSI(Module Device)
[    0.384619] ACPI: Added _OSI(Processor Device)
[    0.384620] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.384621] ACPI: Added _OSI(Processor Aggregator Device)
[    0.384955] ACPI: Executed 1 blocks of module-level executable AML code
[    0.389914] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.391406] ACPI: Dynamic OEM Table Load:
[    0.391418] ACPI: SSDT 0xFFFF944B109CF800 000784 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.391882] ACPI: Dynamic OEM Table Load:
[    0.391891] ACPI: SSDT 0xFFFF944B10A1D000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.392233] ACPI: Dynamic OEM Table Load:
[    0.392240] ACPI: SSDT 0xFFFF944B10A92A00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.393325] ACPI : EC: EC started
[    0.472254] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.472257] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.472259] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.472260] ACPI: Interpreter enabled
[    0.472296] ACPI: (supports S0 S1 S3 S4 S5)
[    0.472297] ACPI: Using IOAPIC for interrupt routing
[    0.472335] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.540752] ACPI: Power Resource [FN00] (off)
[    0.540889] ACPI: Power Resource [FN01] (off)
[    0.541020] ACPI: Power Resource [FN02] (off)
[    0.541149] ACPI: Power Resource [FN03] (off)
[    0.541278] ACPI: Power Resource [FN04] (off)
[    0.542136] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.542143] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.542338] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.542967] PCI host bridge to bus 0000:00
[    0.542971] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.542973] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.542975] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.542976] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.542979] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.542989] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.543131] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.543145] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.543153] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.543159] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.543335] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.543371] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[    0.543499] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.543569] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.543632] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.543667] pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit]
[    0.543797] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.543941] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.543970] pci 0000:00:1a.0: reg 0x10: [mem 0xf061a000-0xf061a3ff]
[    0.544116] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.544260] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.544291] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[    0.544427] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.544504] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.544567] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.544700] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.544777] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.544843] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.544968] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.545044] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.545106] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.545136] pci 0000:00:1d.0: reg 0x10: [mem 0xf0619000-0xf06193ff]
[    0.545282] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.545407] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.545676] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.545708] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.545723] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.545738] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.545753] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.545768] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.545782] pci 0000:00:1f.2: reg 0x24: [mem 0xf0618000-0xf06187ff]
[    0.545867] pci 0000:00:1f.2: PME# supported from D3hot
[    0.545988] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.546017] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit]
[    0.546058] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.546331] pci 0000:01:00.0: [8086:088e] type 00 class 0x028000
[    0.546390] pci 0000:01:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
[    0.546666] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.546740] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.556223] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.556236] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.556423] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.556512] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.556644] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.556726] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.557157] pci 0000:02:00.0: supports D1 D2
[    0.557159] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.557334] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.568270] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.568276] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.568290] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.584960] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.585039] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.585117] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.585194] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.585269] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.585347] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.585423] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.585500] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.600739] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.600828] ACPI : EC: event unblocked
[    0.601117] ACPI : EC: 0 stale EC events cleared
[    0.601121] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.601123] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.601349] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.601352] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.601356] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.601356] vgaarb: loaded
[    0.601612] SCSI subsystem initialized
[    0.601683] libata version 3.00 loaded.
[    0.601710] ACPI: bus type USB registered
[    0.601733] usbcore: registered new interface driver usbfs
[    0.601748] usbcore: registered new interface driver hub
[    0.601773] usbcore: registered new device driver usb
[    0.601944] PCI: Using ACPI for IRQ routing
[    0.603864] PCI: pci_cache_line_size set to 64 bytes
[    0.603930] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.603932] e820: reserve RAM buffer [mem 0xc42aa000-0xc7ffffff]
[    0.603933] e820: reserve RAM buffer [mem 0xd33ef000-0xd3ffffff]
[    0.603934] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.603935] e820: reserve RAM buffer [mem 0x31f600000-0x31fffffff]
[    0.604076] NetLabel: Initializing
[    0.604077] NetLabel:  domain hash size = 128
[    0.604078] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.604102] NetLabel:  unlabeled traffic allowed by default
[    0.604294] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.604302] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.606329] clocksource: Switched to clocksource hpet
[    0.617540] VFS: Disk quotas dquot_6.6.0
[    0.617578] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.617674] AppArmor: AppArmor Filesystem Enabled
[    0.617744] pnp: PnP ACPI init
[    0.618252] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.618255] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.618257] system 00:00: [io  0x5000-0x5003] has been reserved
[    0.618259] system 00:00: [io  0xffff] has been reserved
[    0.618261] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.618263] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.618265] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.618270] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.618272] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.618274] system 00:00: [io  0x5000-0x500f] could not be reserved
[    0.618280] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.618344] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.618424] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.618428] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.618475] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.618540] pnp 00:04: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.618776] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.618779] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.618781] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.618783] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.618785] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.618787] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.618789] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.618791] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.618793] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.618796] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.618798] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved
[    0.618801] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.619338] pnp: PnP ACPI: found 6 devices
[    0.626584] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.626622] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.626631] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.626645] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.626648] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.626660] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.626671] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.626673] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.626675] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.626677] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[    0.626679] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.626681] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.626683] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.626809] NET: Registered protocol family 2
[    0.627074] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.627435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.627626] TCP: Hash tables configured (established 131072 bind 65536)
[    0.627676] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.627754] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.627876] NET: Registered protocol family 1
[    0.627897] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.628654] PCI: CLS 64 bytes, default 64
[    0.628725] Trying to unpack rootfs image as initramfs...
[    1.685725] Freeing initrd memory: 40660K
[    1.685730] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.685734] software IO TLB [mem 0xcf3ef000-0xd33ef000] (64MB) mapped at [ffff9448cf3ef000-ffff9448d33eefff]
[    1.686041] Scanning for low memory corruption every 60 seconds
[    1.686581] audit: initializing netlink subsys (disabled)
[    1.686627] audit: type=2000 audit(1487603609.672:1): initialized
[    1.687187] Initialise system trusted keyrings
[    1.687288] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    1.689609] zbud: loaded
[    1.690307] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.690607] fuse init (API version 7.26)
[    1.690800] Allocating IMA blacklist keyring.
[    1.692457] Key type asymmetric registered
[    1.692459] Asymmetric key parser 'x509' registered
[    1.692525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.692569] io scheduler noop registered
[    1.692570] io scheduler deadline registered
[    1.692581] io scheduler cfq registered (default)
[    1.693194] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.693195] vesafb: scrolling: redraw
[    1.693197] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.693212] vesafb: framebuffer at 0xe0000000, mapped to 0xffffa46e42800000, using 4160k, total 4160k
[    1.803936] Console: switching to colour frame buffer device 170x48
[    1.914216] fb0: VESA VGA frame buffer device
[    1.914250] intel_idle: MWAIT substates: 0x21120
[    1.914251] intel_idle: v0.4.1 model 0x2A
[    1.914515] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.914761] ACPI: AC Adapter [ADP1] (on-line)
[    1.914871] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.914893] ACPI: Lid Switch [LID0]
[    1.914946] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.914950] ACPI: Power Button [PWRB]
[    1.915002] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.915005] ACPI: Power Button [PWRF]
[    1.916443] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.916826] thermal LNXTHERM:00: registered as thermal_zone0
[    1.916828] ACPI: Thermal Zone [TZ00] (41 C)
[    1.917175] thermal LNXTHERM:01: registered as thermal_zone1
[    1.917177] ACPI: Thermal Zone [TZ01] (30 C)
[    1.917218] GHES: HEST is not enabled!
[    1.917403] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.922662] ACPI: Battery Slot [BAT1] (battery present)
[    1.922698] Linux agpgart interface v0.103
[    1.927096] brd: module loaded
[    1.929046] loop: module loaded
[    1.929299] libphy: Fixed MDIO Bus: probed
[    1.929300] tun: Universal TUN/TAP device driver, 1.6
[    1.929301] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    1.929348] PPP generic driver version 2.4.2
[    1.929402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.929406] ehci-pci: EHCI PCI platform driver
[    1.929587] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.929595] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.929612] ehci-pci 0000:00:1a.0: debug port 2
[    1.933535] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.933554] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061a000
[    1.946336] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.946421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.946424] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.946426] usb usb1: Product: EHCI Host Controller
[    1.946427] usb usb1: Manufacturer: Linux 4.10.0-041000-generic ehci_hcd
[    1.946429] usb usb1: SerialNumber: 0000:00:1a.0
[    1.946727] hub 1-0:1.0: USB hub found
[    1.946737] hub 1-0:1.0: 3 ports detected
[    1.947096] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.947106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.947122] ehci-pci 0000:00:1d.0: debug port 2
[    1.951020] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.951039] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0619000
[    1.966350] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.966448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.966450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.966452] usb usb2: Product: EHCI Host Controller
[    1.966454] usb usb2: Manufacturer: Linux 4.10.0-041000-generic ehci_hcd
[    1.966456] usb usb2: SerialNumber: 0000:00:1d.0
[    1.966751] hub 2-0:1.0: USB hub found
[    1.966761] hub 2-0:1.0: 3 ports detected
[    1.966948] ehci-platform: EHCI generic platform driver
[    1.966970] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.966982] ohci-pci: OHCI PCI platform driver
[    1.966995] ohci-platform: OHCI generic platform driver
[    1.967005] uhci_hcd: USB Universal Host Controller Interface driver
[    1.967234] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.967241] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.968340] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.968348] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.968472] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.968474] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.968476] usb usb3: Product: xHCI Host Controller
[    1.968478] usb usb3: Manufacturer: Linux 4.10.0-041000-generic xhci-hcd
[    1.968480] usb usb3: SerialNumber: 0000:00:14.0
[    1.968755] hub 3-0:1.0: USB hub found
[    1.968768] hub 3-0:1.0: 4 ports detected
[    1.969311] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.969316] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.969361] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.969363] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.969365] usb usb4: Product: xHCI Host Controller
[    1.969366] usb usb4: Manufacturer: Linux 4.10.0-041000-generic xhci-hcd
[    1.969368] usb usb4: SerialNumber: 0000:00:14.0
[    1.969626] hub 4-0:1.0: USB hub found
[    1.969640] hub 4-0:1.0: 4 ports detected
[    1.970261] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    1.976163] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.976169] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.976543] mousedev: PS/2 mouse device common for all mice
[    1.977150] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.977181] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.977190] i2c /dev entries driver
[    1.977264] device-mapper: uevent: version 1.0.3
[    1.977378] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx
[    1.977388] intel_pstate: Intel P-state driver initializing
[    1.977672] ledtrig-cpu: registered to indicate activity on CPUs
[    1.978143] NET: Registered protocol family 10
[    1.983583] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.984007] Segment Routing with IPv6
[    1.984034] NET: Registered protocol family 17
[    1.984047] Key type dns_resolver registered
[    1.984438] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    1.984510] microcode: Microcode Update Driver: v2.2.
[    1.984684] registered taskstats version 1
[    1.984696] Loading compiled-in X.509 certificates
[    1.988592] Loaded X.509 cert 'Build time autogenerated kernel key: 15395107a50a2e7362d75949548d6307a7d9c9f7'
[    1.988622] zswap: loaded using pool lzo/zbud
[    2.007798] Key type big_key registered
[    2.007803] Key type trusted registered
[    2.010356] Key type encrypted registered
[    2.010363] AppArmor: AppArmor sha1 policy hashing enabled
[    2.010367] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.010402] evm: HMAC attrs: 0x1
[    2.010699]   Magic number: 5:237:235
[    2.010748] acpi-fan PNP0C0B:00: hash matches
[    2.010755] acpi PNP0C0B:00: hash matches
[    2.010855] rtc_cmos 00:01: setting system clock to 2017-02-20 15:13:30 UTC (1487603610)
[    2.010996] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.010997] EDD information not available.
[    2.011094] PM: Hibernation image not present or could not be loaded.
[    2.014288] Freeing unused kernel memory: 2228K
[    2.014290] Write protecting the kernel read-only data: 14336k
[    2.014958] Freeing unused kernel memory: 1288K
[    2.015866] Freeing unused kernel memory: 244K
[    2.029144] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.045817] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.045985] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.046008] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.046034] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.047020] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.047086] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.049491] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.049586] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.049609] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.050267] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.094150] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    2.098833] wmi: Mapper loaded
[    2.124040] ahci 0000:00:1f.2: version 3.0
[    2.124399] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    2.124408] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.125005] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.125017] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.125860] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffa46e41935000, e8:03:9a:0f:c4:4f, XID 0c900800 IRQ 26
[    2.125864] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.127669] [drm] Initialized
[    2.138246] scsi host0: ahci
[    2.146295] scsi host1: ahci
[    2.162271] scsi host2: ahci
[    2.170243] scsi host3: ahci
[    2.170466] scsi host4: ahci
[    2.170783] scsi host5: ahci
[    2.170896] ata1: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618100 irq 25
[    2.170900] ata2: SATA max UDMA/133 abar m2048@0xf0618000 port 0xf0618180 irq 25
[    2.170902] ata3: DUMMY
[    2.170904] ata4: DUMMY
[    2.170905] ata5: DUMMY
[    2.170906] ata6: DUMMY
[    2.185979] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    2.194580] [drm] Memory usable by graphics device = 2048M
[    2.194584] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    2.194585] fb: switching to inteldrmfb from VESA VGA
[    2.194617] Console: switching to colour dummy device 80x25
[    2.194776] [drm] Replacing VGA console driver
[    2.200364] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.200365] [drm] Driver supports precise vblank timestamp query.
[    2.203065] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.239256] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.239626] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.239802] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[    2.252565] fbcon: inteldrmfb (fb0) is primary device
[    2.282324] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.306312] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    2.306334] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.430938] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.430941] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.431407] hub 1-1:1.0: USB hub found
[    2.431598] hub 1-1:1.0: 6 ports detected
[    2.452110] usb 3-2: New USB device found, idVendor=0458, idProduct=0186
[    2.452113] usb 3-2: New USB device strings: Mfr=4, Product=40, SerialNumber=0
[    2.452115] usb 3-2: Product: Wired Mouse
[    2.452117] usb 3-2: Manufacturer: KYE SYSTEMS CORP.
[    2.457687] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.457689] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.457977] hub 2-1:1.0: USB hub found
[    2.458055] hub 2-1:1.0: 6 ports detected
[    2.458338] hidraw: raw HID events driver (C) Jiri Kosina
[    2.465370] usbhid 3-2:1.1: couldn't find an input interrupt endpoint
[    2.465390] usbcore: registered new interface driver usbhid
[    2.465390] usbhid: USB HID core driver
[    2.467978] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:0458:0186.0001/input/input7
[    2.468179] hid-generic 0003:0458:0186.0001: input,hidraw0: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:14.0-2/input0
[    2.485582] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.485608] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.486247] ata2.00: ATA-9: SanDisk SSD i100 24GB, 11.50.04, max UDMA/133
[    2.486261] ata2.00: 46905264 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.486859] ata2.00: configured for UDMA/133
[    2.486874] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    2.486876] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.488429] ata1.00: configured for UDMA/133
[    2.488847] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 A6C0 PQ: 0 ANSI: 5
[    2.530575] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.530618] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.530622] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.530642] sd 0:0:0:0: [sda] Write Protect is off
[    2.530646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.530694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.530927] scsi 1:0:0:0: Direct-Access     ATA      SanDisk SSD i100 0.04 PQ: 0 ANSI: 5
[    2.560036] random: fast init done
[    2.578545] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.578692] sd 1:0:0:0: [sdb] 46905264 512-byte logical blocks: (24.0 GB/22.4 GiB)
[    2.578723] sd 1:0:0:0: [sdb] Write Protect is off
[    2.578726] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.578787] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.579677]  sdb: sdb1
[    2.580170] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.611113]  sda: sda2 sda4 < sda5 sda6 sda7 sda8 >
[    2.612383] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.698256] tsc: Refined TSC clocksource calibration: 1496.600 MHz
[    2.698266] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159296d3708, max_idle_ns: 440795218047 ns
[    2.718203] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    2.746231] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    2.858868] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
[    2.858871] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.946837] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1035
[    2.946840] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.946842] usb 1-1.4: Product: WebCam SC-13HDL12131N
[    2.946843] usb 1-1.4: Manufacturer: Generic
[    2.946845] usb 1-1.4: SerialNumber: 200901010001
[    3.014705] Console: switching to colour frame buffer device 170x48
[    3.028572] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[    3.047402] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[    3.051936] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.062716] psmouse serio1: elantech: Elan sample query result 03, 3f, 86
[    3.138826] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    3.722485] clocksource: Switched to clocksource tsc
[    4.498050] raid6: sse2x1   gen()  4000 MB/s
[    4.566037] raid6: sse2x1   xor()  3089 MB/s
[    4.634039] raid6: sse2x2   gen()  4979 MB/s
[    4.702027] raid6: sse2x2   xor()  3562 MB/s
[    4.770028] raid6: sse2x4   gen()  5794 MB/s
[    4.838024] raid6: sse2x4   xor()  4366 MB/s
[    4.838026] raid6: using algorithm sse2x4 gen() 5794 MB/s
[    4.838027] raid6: .... xor() 4366 MB/s, rmw enabled
[    4.838029] raid6: using ssse3x2 recovery algorithm
[    4.840100] xor: automatically using best checksumming function   avx       
[    4.867626] Btrfs loaded, crc32c=crc32c-intel
[    5.506009] BTRFS: device fsid 4f4435ca-b877-47a5-9065-3dd624c0514e devid 1 transid 409378 /dev/sdb1
[    5.539791] BTRFS info (device sdb1): disk space caching is enabled
[    5.539794] BTRFS info (device sdb1): has skinny extents
[    5.563926] BTRFS info (device sdb1): detected SSD devices, enabling SSD mode
[    5.743219] systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
[    5.782906] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.790045] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.790245] systemd[1]: Detected architecture x86-64.
[    5.791187] systemd[1]: Set hostname to <caravena-530U3C-530U4C>.
[    6.027519] systemd[1]: mysql.service: Cannot add dependency job, ignoring: Unit mysql.service is masked.
[    6.028687] systemd[1]: Reached target Remote File Systems.
[    6.028831] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.028853] systemd[1]: Reached target User and Group Name Lookups.
[    6.029063] systemd[1]: Created slice User and Session Slice.
[    6.029129] systemd[1]: Listening on Journal Socket.
[    6.029245] systemd[1]: Listening on Journal Audit Socket.
[    6.092105] lp: driver loaded but no devices found
[    6.104226] ppdev: user-space parallel port driver
[    6.181469] random: crng init done
[    6.278918] BTRFS info (device sdb1): disk space caching is enabled
[    6.313554] systemd-journald[313]: Received request to flush runtime journal from PID 1
[    6.586163] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.595117] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
[    6.595130] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.595134] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[    6.595141] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.595143] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[    6.595149] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.595151] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[    6.595157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.595159] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.679433] Intel(R) Wireless WiFi driver for Linux
[    6.679435] Copyright(c) 2003- 2015 Intel Corporation
[    6.679671] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.694093] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    6.760691] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    6.760694] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    6.760697] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    6.760700] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[    6.761929] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[    6.827186] Bluetooth: Core ver 2.22
[    6.827212] NET: Registered protocol family 31
[    6.827214] Bluetooth: HCI device and connection manager initialized
[    6.827219] Bluetooth: HCI socket layer initialized
[    6.827223] Bluetooth: L2CAP socket layer initialized
[    6.827234] Bluetooth: SCO socket layer initialized
[    6.844624] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    6.848501] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    6.848505] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    6.848506] RAPL PMU: hw unit of domain package 2^-16 Joules
[    6.848508] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    6.884424] usbcore: registered new interface driver btusb
[    6.900175] media: Linux media interface: v0.10
[    6.959479] Linux video capture interface: v2.00
[    7.015761] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL12131N (2232:1035)
[    7.042150] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[    7.042157] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[    7.042161] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[    7.042349] input: WebCam SC-13HDL12131N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
[    7.042482] usbcore: registered new interface driver uvcvideo
[    7.042484] USB Video Class driver (1.1.1)
[    7.088226] intel_rapl: Found RAPL domain package
[    7.088229] intel_rapl: Found RAPL domain core
[    7.088231] intel_rapl: Found RAPL domain uncore
[    7.088239] intel_rapl: RAPL package 0 domain package locked by BIOS
[    7.135365] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.135371] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.135376] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    7.135379] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.135381] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.135384] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[    7.135387] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    7.161954] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.176008] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.176153] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.176293] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.199629] samsung_laptop: detected SABI interface: SwSmi@
[    7.421216] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[    7.584390] usb 2-1.5: USB disconnect, device number 3
[    8.538925] Adding 3999740k swap on /dev/sda5.  Priority:-1 extents:1 across:3999740k FS
[    8.948048] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    9.887708] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   10.159872] audit: type=1400 audit(1487614418.644:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=980 comm="apparmor_parser"
[   10.169425] audit: type=1400 audit(1487614418.652:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=976 comm="apparmor_parser"
[   10.169432] audit: type=1400 audit(1487614418.652:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=976 comm="apparmor_parser"
[   10.169437] audit: type=1400 audit(1487614418.652:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=976 comm="apparmor_parser"
[   10.169440] audit: type=1400 audit(1487614418.652:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=976 comm="apparmor_parser"
[   10.170374] audit: type=1400 audit(1487614418.656:7): apparmor="STATUS" operation="profile_load" name="virt-aa-helper" pid=981 comm="apparmor_parser"
[   10.170417] audit: type=1400 audit(1487614418.656:8): apparmor="STATUS" operation="profile_load" name="system_tor" pid=977 comm="apparmor_parser"
[   10.178162] audit: type=1400 audit(1487614418.664:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=984 comm="apparmor_parser"
[   10.182840] audit: type=1400 audit(1487614418.668:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=982 comm="apparmor_parser"
[   10.182847] audit: type=1400 audit(1487614418.668:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=982 comm="apparmor_parser"
[   10.531707] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.531710] Bluetooth: BNEP filters: protocol multicast
[   10.531716] Bluetooth: BNEP socket layer initialized
[   12.436985] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   12.571933] r8169 0000:02:00.0 enp2s0: link down
[   12.572056] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   12.580250] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   12.584085] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   12.591223] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   12.591325] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   12.881219] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   12.887902] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   12.888004] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   12.970970] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   12.978499] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   12.984799] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   12.985186] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   12.985288] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   13.269929] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   13.276613] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   13.276711] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   13.367404] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   13.416635] Ebtables v2.0 registered
[   13.494731] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   13.724460] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   13.777608] virbr0: port 1(virbr0-nic) entered blocking state
[   13.777611] virbr0: port 1(virbr0-nic) entered disabled state
[   13.777739] device virbr0-nic entered promiscuous mode
[   14.053069] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   14.180149] virbr0: port 1(virbr0-nic) entered blocking state
[   14.180154] virbr0: port 1(virbr0-nic) entered listening state
[   14.290593] virbr0: port 1(virbr0-nic) entered disabled state
[   17.114693] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   17.121386] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   17.121486] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   17.405697] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   17.412396] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   17.412499] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[   17.495679] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   17.549876] wlp1s0: authenticate with 04:18:d6:18:bb:60
[   17.553608] wlp1s0: send auth to 04:18:d6:18:bb:60 (try 1/3)
[   17.556770] wlp1s0: authenticated
[   17.561134] wlp1s0: associate with 04:18:d6:18:bb:60 (try 1/3)
[   17.564748] wlp1s0: RX AssocResp from 04:18:d6:18:bb:60 (capab=0x431 status=0 aid=2)
[   17.567311] wlp1s0: associated
[   17.567396] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  205.787183] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
[  205.948098] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
[  205.948104] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  206.131797] Bluetooth: RFCOMM TTY layer initialized
[  206.131805] Bluetooth: RFCOMM socket layer initialized
[  206.131816] Bluetooth: RFCOMM ver 1.11
[  212.003729] usb 2-1.5: USB disconnect, device number 4
[  216.262625] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[  216.423158] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
[  216.423165] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  234.031594] input: 00:02:02:33:E7:EA as /devices/virtual/input/input12
[  377.520067] usb 3-1: new full-speed USB device number 3 using xhci_hcd
[  377.665188] usb 3-1: New USB device found, idVendor=0fe6, idProduct=9700
[  377.665194] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  377.665197] usb 3-1: Product: USB 2.0 10/100M Ethernet Adaptor
[  377.731170] dm9601 3-1:1.0 eth0: register 'dm9601' at usb-0000:00:14.0-1, Davicom DM96xx USB 10/100 Ethernet, 00:e0:4c:53:44:58
[  377.731361] usbcore: registered new interface driver dm9601
[  377.736239] usbcore: registered new interface driver sr9700
[  377.743954] dm9601 3-1:1.0 enx00e04c534458: renamed from eth0
[  377.802735] IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
[  377.848664] dm9601 3-1:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family DRAM Controller [144d:c0d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family Integrated Graphics Controller [144d:c0d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 3000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Samsung Electronics Co Ltd 7 Series/C210 Series Chipset Family USB xHCI Host Controller [144d:c0d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 25
	Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
	Subsystem: Samsung Electronics Co Ltd 7 Series/C210 Series Chipset Family MEI Controller [144d:c0d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at f0615000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Samsung Electronics Co Ltd 7 Series/C210 Series Chipset Family USB Enhanced Host Controller [144d:c0d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f061a000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
	Subsystem: Samsung Electronics Co Ltd 7 Series/C210 Series Chipset Family High Definition Audio Controller [144d:c0d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at f0610000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: f0500000-f05fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 19
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Prefetchable memory behind bridge: 00000000f0400000-00000000f04fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Samsung Electronics Co Ltd 7 Series/C210 Series Chipset Family USB Enhanced Host Controller [144d:c0d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f0619000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
	Subsystem: Samsung Electronics Co Ltd HM76 Express Chipset LPC Controller [144d:c0d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Samsung Electronics Co Ltd 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [144d:c0d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 26
	Region 0: I/O ports at 3088 [size=8]
	Region 1: I/O ports at 3094 [size=4]
	Region 2: I/O ports at 3080 [size=8]
	Region 3: I/O ports at 3090 [size=4]
	Region 4: I/O ports at 3060 [size=32]
	Region 5: Memory at f0618000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
	Subsystem: Samsung Electronics Co Ltd 7 Series/C210 Series Chipset Family SMBus Controller [144d:c0d7]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 7
	Region 0: Memory at f0614000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at efa0 [size=32]
	Kernel modules: i2c_i801

01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24)
	Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
	Subsystem: Samsung Electronics Co Ltd RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [144d:c0d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	Region 0: I/O ports at 2000 [size=256]
	Region 2: Memory at f0404000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux