If request was already started, this means we had to
stop the transfer. With that we also need to ignore
all TRBs used by the request, however TRBs can only
be modified after completion of END_TRANSFER
command. So what we have to do here is wait for
END_TRANSFER completion and only after that jump
over TRBs by clearing HWO and incrementing dequeue
pointer.
Note that we have 2 possible types of transfers
here:
i) Linear buffer request
ii) SG-list based request
SG-list based requests will have r->num_pending_sgs
set to a valid number (> 0). Linear requests,
normally use a single TRB.
For each of these two cases, if r->unaligned flag is
set, one extra TRB has been used to align transfer
size to wMaxPacketSize.
All of these cases need to be taken into
consideration so we don't mess up our TRB ring
pointers.
Tested-by: Janusz Dziedzic <januszx.dziedzic@xxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
---
Will be sent on pull request after -rc1 is tagged
drivers/usb/dwc3/gadget.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4db97ecae885..f875b3f4b0ec 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1342,6 +1342,68 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
if (r == req) {
/* wait until it is processed */
dwc3_stop_active_transfer(dwc, dep->number, true);
+
+ /*
+ * If request was already started, this means we had to
+ * stop the transfer. With that we also need to ignore
+ * all TRBs used by the request, however TRBs can only
+ * be modified after completion of END_TRANSFER
+ * command. So what we do here is that we wait for
+ * END_TRANSFER completion and only after that, we jump
+ * over TRBs by clearing HWO and incrementing dequeue
+ * pointer.
+ *
+ * Note that we have 2 possible types of transfers here:
+ *
+ * i) Linear buffer request
+ * ii) SG-list based request
+ *
+ * SG-list based requests will have r->num_pending_sgs
+ * set to a valid number (> 0). Linear requests,
+ * normally use a single TRB.
+ *
+ * For each of these two cases, if r->unaligned flag is
+ * set, one extra TRB has been used to align transfer
+ * size to wMaxPacketSize.
+ *
+ * All of these cases need to be taken into
+ * consideration so we don't mess up our TRB ring
+ * pointers.
+ */
+ wait_event_lock_irq(dep->wait_end_transfer,
+ !(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
+ dwc->lock);
+
+ if (!r->trb)
+ goto out1;
+
+ if (r->num_pending_sgs) {
+ struct dwc3_trb *trb;
+ int i = 0;
+
+ for (i = 0; i < r->num_pending_sgs; i++) {
+ trb = r->trb + i;
+ trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+ dwc3_ep_inc_deq(dep);
+ }
+
+ if (r->unaligned) {
+ trb = r->trb + r->num_pending_sgs + 1;
+ trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+ dwc3_ep_inc_deq(dep);
+ }
+ } else {
+ struct dwc3_trb *trb = r->trb;
+
+ trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+ dwc3_ep_inc_deq(dep);
+
+ if (r->unaligned) {
+ trb = r->trb + 1;
+ trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+ dwc3_ep_inc_deq(dep);
+ }
+ }
goto out1;
}
dev_err(dwc->dev, "request %p was not queued to %s\n",
@@ -1352,6 +1414,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
out1:
/* giveback the request */
+ dep->queued_requests--;
dwc3_gadget_giveback(dep, req, -ECONNRESET);
out0:
--
2.11.0.295.gd7dffce1ce
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
