This patch introduces a new parameter to activate USB OTG HS/FS core embedded
phy transceiver. The STM32F4x9 SoC uses the GGPIO register to enable the transceiver.
Also add the dwc2_core_params structure for stm32f4 otg fs.
Signed-off-by: Bruno Herrera <bruherrera@xxxxxxxxx>
---
drivers/usb/dwc2/core.h | 4 ++++
drivers/usb/dwc2/hcd.c | 13 ++++++++++++-
drivers/usb/dwc2/hw.h | 2 ++
drivers/usb/dwc2/params.c | 20 ++++++++++++++++++++
4 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index b9b62f1..ed8ce42 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -423,6 +423,9 @@ enum dwc2_ep0_state {
* needed.
* 0 - No (default)
* 1 - Yes
+ * @activate_transceiver: Activate internal transceiver using GGPIO register.
+ * 0 - Deactivate the transceiver (default)
+ * 1 - Activate the transceiver
* @g_dma: Enables gadget dma usage (default: autodetect).
* @g_dma_desc: Enables gadget descriptor DMA (default: autodetect).
* @g_rx_fifo_size: The periodic rx fifo size for the device, in
@@ -477,6 +480,7 @@ struct dwc2_core_params {
bool uframe_sched;
bool external_id_pin_ctl;
bool hibernation;
+ bool activate_transceiver;
u16 max_packet_count;
u32 max_transfer_size;
u32 ahbcfg;
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index a73722e..190a441 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -121,7 +121,7 @@ static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
- u32 usbcfg, i2cctl;
+ u32 usbcfg, ggpio, i2cctl;
int retval = 0;
/*
@@ -145,6 +145,17 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
return retval;
}
}
+
+ ggpio = dwc2_readl(hsotg->regs + GGPIO);
+ if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN) &&
+ (hsotg->params.activate_transceiver > 0)) {
+ dev_dbg(hsotg->dev, "Activating transceiver\n");
+ /* STM32F4x9 uses the GGPIO register as general core
+ * configuration register.
+ */
+ ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
+ dwc2_writel(ggpio, hsotg->regs + GGPIO);
+ }
}
/*
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index bde7248..9b432c1 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -225,6 +225,8 @@
#define GPVNDCTL HSOTG_REG(0x0034)
#define GGPIO HSOTG_REG(0x0038)
+#define GGPIO_STM32_OTG_GCCFG_PWRDWN (1 << 16)
+
#define GUID HSOTG_REG(0x003c)
#define GSNPSID HSOTG_REG(0x0040)
#define GHWCFG1 HSOTG_REG(0x0044)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 2990c34..a35abba 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -120,6 +120,23 @@ static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
}
+static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *p = &hsotg->params;
+
+ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->speed = DWC2_SPEED_PARAM_FULL;
+ p->host_rx_fifo_size = 128;
+ p->host_nperio_tx_fifo_size = 96;
+ p->host_perio_tx_fifo_size = 96;
+ p->max_packet_count = 256;
+ p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
+ p->i2c_enable = false;
+ p->uframe_sched = false;
+ p->activate_transceiver = true;
+
+}
+
const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
@@ -133,6 +150,9 @@ const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "amlogic,meson-gxbb-usb",
.data = dwc2_set_amlogic_params },
{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
+ { .compatible = "st,stm32f4x9-fsotg",
+ .data = dwc2_set_stm32f4x9_fsotg_params },
+ { .compatible = "st,stm32f4x9-hsotg" },
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
--
2.10.1 (Apple Git-78)
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
