The boot log:
Feb 19 06:00:53 halley syslog-ng[1855]: syslog-ng starting up; version='2.1.3' Feb 19 06:00:53 halley [ 0.000000] Linux version 2.6.29-rc4 (root@halley) (gcc version 4.1.2 20070214 ( (gdc 0.24, using dmd 1.020)) (Gentoo 4.1.2 p1.3)) #3 PREEMPT Sun Feb 15 18:03:41 EET 2009 Feb 19 06:00:53 halley [ 0.000000] Command line: root=/dev/sda6 Feb 19 06:00:53 halley [ 0.000000] KERNEL supported cpus: Feb 19 06:00:53 halley [ 0.000000] Intel GenuineIntel Feb 19 06:00:53 halley [ 0.000000] AMD AuthenticAMD Feb 19 06:00:53 halley [ 0.000000] Centaur CentaurHauls Feb 19 06:00:53 halley [ 0.000000] BIOS-provided physical RAM map: Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 0000000000100000 - 000000006cb70000 (usable) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 000000006cb70000 - 000000006cb80000 (ACPI NVS) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 000000006cb80000 - 000000006fd4f000 (usable) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 000000006fd4f000 - 000000006fdcf000 (reserved) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 000000006fdcf000 - 000000006fecf000 (ACPI NVS) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 000000006fecf000 - 000000006feff000 (ACPI data) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 000000006feff000 - 000000006ff00000 (usable) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 19 06:00:53 halley [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Feb 19 06:00:53 halley [ 0.000000] DMI 2.4 present. Feb 19 06:00:53 halley [ 0.000000] last_pfn = 0x6ff00 max_arch_pfn = 0x100000000 Feb 19 06:00:53 halley [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Feb 19 06:00:53 halley [ 0.000000] init_memory_mapping: 0000000000000000-000000006ff00000 Feb 19 06:00:53 halley [ 0.000000] 0000000000 - 006fe00000 page 2M Feb 19 06:00:53 halley [ 0.000000] 006fe00000 - 006ff00000 page 4k Feb 19 06:00:53 halley [ 0.000000] kernel direct mapping tables up to 6ff00000 @ 8000-c000 Feb 19 06:00:53 halley [ 0.000000] last_map_addr: 6ff00000 end: 6ff00000 Feb 19 06:00:53 halley [ 0.000000] ACPI: RSDP 000F6980, 0014 (r0 HP ) Feb 19 06:00:53 halley [ 0.000000] ACPI: RSDT 6FEFE038, 003C (r1 HPQOEM SLIC-MPC 3 1000013) Feb 19 06:00:53 halley [ 0.000000] ACPI: FACP 6FEFD000, 0074 (r1 HP 0944 3 HP 1) Feb 19 06:00:53 halley [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) Feb 19 06:00:53 halley [ 0.000000] ACPI: DSDT 6FEE4000, 15827 (r1 HP 0944 1 HP 1) Feb 19 06:00:53 halley [ 0.000000] ACPI: FACS 6FEA1000, 0040 Feb 19 06:00:53 halley [ 0.000000] ACPI: APIC 6FEFC000, 0084 (r1 HP 0944 1 HP 1) Feb 19 06:00:53 halley [ 0.000000] ACPI: MCFG 6FEFB000, 003C (r1 HP 0944 1 HP 1) Feb 19 06:00:53 halley [ 0.000000] ACPI: SLIC 6FEFA000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) Feb 19 06:00:53 halley [ 0.000000] ACPI: HPET 6FEE2000, 0038 (r1 HP 0944 1 HP 1) Feb 19 06:00:53 halley [ 0.000000] ACPI: SSDT 6FEE1000, 016C (r1 AMD PowerNow 1 AMD 1) Feb 19 06:00:53 halley [ 0.000000] ACPI: Local APIC address 0xfee00000 Feb 19 06:00:53 halley [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 006ff00000] Feb 19 06:00:53 halley [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Feb 19 06:00:53 halley [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] Feb 19 06:00:53 halley [ 0.000000] #2 [0000200000 - 00006eef30] TEXT DATA BSS ==> [0000200000 - 00006eef30] Feb 19 06:00:53 halley [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] Feb 19 06:00:53 halley [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] Feb 19 06:00:53 halley [ 0.000000] [ffffe20000000000-ffffe200019fffff] PMD -> [ffff880001200000-ffff880002bfffff] on node 0 Feb 19 06:00:53 halley [ 0.000000] Zone PFN ranges: Feb 19 06:00:53 halley [ 0.000000] DMA 0x00000000 -> 0x00001000 Feb 19 06:00:53 halley [ 0.000000] DMA32 0x00001000 -> 0x00100000 Feb 19 06:00:53 halley [ 0.000000] Normal 0x00100000 -> 0x00100000 Feb 19 06:00:53 halley [ 0.000000] Movable zone start PFN for each node Feb 19 06:00:53 halley [ 0.000000] early_node_map[4] active PFN ranges Feb 19 06:00:53 halley [ 0.000000] 0: 0x00000000 -> 0x0000009f Feb 19 06:00:53 halley [ 0.000000] 0: 0x00000100 -> 0x0006cb70 Feb 19 06:00:53 halley [ 0.000000] 0: 0x0006cb80 -> 0x0006fd4f Feb 19 06:00:53 halley [ 0.000000] 0: 0x0006feff -> 0x0006ff00 Feb 19 06:00:53 halley [ 0.000000] On node 0 totalpages: 457951 Feb 19 06:00:53 halley [ 0.000000] DMA zone: 56 pages used for memmap Feb 19 06:00:53 halley [ 0.000000] DMA zone: 1363 pages reserved Feb 19 06:00:53 halley [ 0.000000] DMA zone: 2580 pages, LIFO batch:0 Feb 19 06:00:53 halley [ 0.000000] DMA32 zone: 6213 pages used for memmap Feb 19 06:00:53 halley [ 0.000000] DMA32 zone: 447739 pages, LIFO batch:31 Feb 19 06:00:53 halley [ 0.000000] ACPI: PM-Timer IO Port: 0x408 Feb 19 06:00:53 halley [ 0.000000] ACPI: Local APIC address 0xfee00000 Feb 19 06:00:53 halley [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Feb 19 06:00:53 halley [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled) Feb 19 06:00:53 halley [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) Feb 19 06:00:53 halley [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) Feb 19 06:00:53 halley [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Feb 19 06:00:53 halley [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Feb 19 06:00:53 halley [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) Feb 19 06:00:53 halley [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) Feb 19 06:00:53 halley [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) Feb 19 06:00:53 halley [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 Feb 19 06:00:53 halley [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Feb 19 06:00:53 halley [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Feb 19 06:00:53 halley [ 0.000000] ACPI: IRQ0 used by override. Feb 19 06:00:53 halley [ 0.000000] ACPI: IRQ2 used by override. Feb 19 06:00:53 halley [ 0.000000] ACPI: IRQ9 used by override. Feb 19 06:00:53 halley [ 0.000000] Using ACPI (MADT) for SMP configuration information Feb 19 06:00:53 halley [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 Feb 19 06:00:53 halley [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Feb 19 06:00:53 halley [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000 Feb 19 06:00:53 halley [ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 Feb 19 06:00:53 halley [ 0.000000] PM: Registered nosave memory: 000000006cb70000 - 000000006cb80000 Feb 19 06:00:53 halley [ 0.000000] PM: Registered nosave memory: 000000006fd4f000 - 000000006fdcf000 Feb 19 06:00:53 halley [ 0.000000] PM: Registered nosave memory: 000000006fdcf000 - 000000006fecf000 Feb 19 06:00:53 halley [ 0.000000] PM: Registered nosave memory: 000000006fecf000 - 000000006feff000 Feb 19 06:00:53 halley [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 6ff00000:70100000) Feb 19 06:00:53 halley [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 450319 Feb 19 06:00:53 halley [ 0.000000] Kernel command line: root=/dev/sda6 Feb 19 06:00:53 halley [ 0.000000] Initializing CPU#0 Feb 19 06:00:53 halley [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Feb 19 06:00:53 halley [ 0.000000] Fast TSC calibration using PIT Feb 19 06:00:53 halley [ 0.000000] Detected 2000.068 MHz processor. Feb 19 06:00:53 halley [ 0.004000] Console: colour VGA+ 80x25 Feb 19 06:00:53 halley [ 0.004000] console [tty0] enabled Feb 19 06:00:53 halley [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Feb 19 06:00:53 halley [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Feb 19 06:00:53 halley [ 0.004000] Checking aperture... Feb 19 06:00:53 halley [ 0.004000] No AGP bridge found Feb 19 06:00:53 halley [ 0.004000] Memory: 1796252k/1833984k available (2712k kernel code, 2180k absent, 34944k reserved, 1543k data, 332k init) Feb 19 06:00:53 halley [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Feb 19 06:00:53 halley [ 0.004000] hpet clockevent registered Feb 19 06:00:53 halley [ 0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer Feb 19 06:00:53 halley [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.13 BogoMIPS (lpj=8000260) Feb 19 06:00:53 halley [ 0.004147] Mount-cache hash table entries: 256 Feb 19 06:00:53 halley [ 0.004323] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Feb 19 06:00:53 halley [ 0.004448] CPU: L2 Cache: 512K (64 bytes/line) Feb 19 06:00:53 halley [ 0.004506] tseg: 006ff00000 Feb 19 06:00:53 halley [ 0.004516] using C1E aware idle routine Feb 19 06:00:53 halley [ 0.004573] CPU: AMD Sempron(tm) SI-40 stepping 01 Feb 19 06:00:53 halley [ 0.004713] ACPI: Core revision 20081204 Feb 19 06:00:53 halley [ 0.020061] Setting APIC routing to flat Feb 19 06:00:53 halley [ 0.020584] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 19 06:00:53 halley [ 0.064001] net_namespace: 952 bytes Feb 19 06:00:53 halley [ 0.064001] Time: 4:00:40 Date: 02/19/09 Feb 19 06:00:53 halley [ 0.064001] NET: Registered protocol family 16 Feb 19 06:00:53 halley [ 0.064001] TOM: 0000000080000000 aka 2048M Feb 19 06:00:53 halley [ 0.064001] Fam 10h mmconf [e0000000, efffffff] Feb 19 06:00:53 halley [ 0.064001] ACPI: bus type pci registered Feb 19 06:00:53 halley [ 0.064001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Feb 19 06:00:53 halley [ 0.064001] PCI: MCFG area at e0000000 reserved in E820 Feb 19 06:00:53 halley [ 0.076173] PCI: Using MMCONFIG at e0000000 - efffffff Feb 19 06:00:53 halley [ 0.076313] PCI: Using configuration type 1 for base access Feb 19 06:00:53 halley [ 0.078226] bio: create slab <bio-0> at 0 Feb 19 06:00:53 halley [ 0.079166] ACPI: EC: Look up EC in DSDT Feb 19 06:00:53 halley [ 0.109236] ACPI: EC: non-query interrupt received, switching to interrupt mode Feb 19 06:00:53 halley [ 0.140190] ACPI: Interpreter enabled Feb 19 06:00:53 halley [ 0.140315] ACPI: (supports S0 S3 S4 S5) Feb 19 06:00:53 halley [ 0.140516] ACPI: Using IOAPIC for interrupt routing Feb 19 06:00:53 halley [ 0.157588] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 Feb 19 06:00:53 halley [ 0.157718] ACPI: EC: driver started in interrupt mode Feb 19 06:00:53 halley [ 0.158091] ACPI: No dock devices found. Feb 19 06:00:53 halley [ 0.158222] ACPI: PCI Root Bridge [PCI0] (0000:00) Feb 19 06:00:53 halley [ 0.158542] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold Feb 19 06:00:53 halley [ 0.158604] pci 0000:00:04.0: PME# disabled Feb 19 06:00:53 halley [ 0.158708] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold Feb 19 06:00:53 halley [ 0.158769] pci 0000:00:09.0: PME# disabled Feb 19 06:00:53 halley [ 0.158884] pci 0000:00:11.0: reg 10 io port: [0x5018-0x501f] Feb 19 06:00:53 halley [ 0.158891] pci 0000:00:11.0: reg 14 io port: [0x5024-0x5027] Feb 19 06:00:53 halley [ 0.158899] pci 0000:00:11.0: reg 18 io port: [0x5010-0x5017] Feb 19 06:00:53 halley [ 0.158906] pci 0000:00:11.0: reg 1c io port: [0x5020-0x5023] Feb 19 06:00:53 halley [ 0.158914] pci 0000:00:11.0: reg 20 io port: [0x5000-0x500f] Feb 19 06:00:53 halley [ 0.158922] pci 0000:00:11.0: reg 24 32bit mmio: [0x92409000-0x924093ff] Feb 19 06:00:53 halley [ 0.158982] pci 0000:00:12.0: reg 10 32bit mmio: [0x92408000-0x92408fff] Feb 19 06:00:53 halley [ 0.159045] pci 0000:00:12.1: reg 10 32bit mmio: [0x92407000-0x92407fff] Feb 19 06:00:53 halley [ 0.159127] pci 0000:00:12.2: reg 10 32bit mmio: [0x92409500-0x924095ff] Feb 19 06:00:53 halley [ 0.159189] pci 0000:00:12.2: supports D1 D2 Feb 19 06:00:53 halley [ 0.159191] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot Feb 19 06:00:53 halley [ 0.159254] pci 0000:00:12.2: PME# disabled Feb 19 06:00:53 halley [ 0.159346] pci 0000:00:13.0: reg 10 32bit mmio: [0x92406000-0x92406fff] Feb 19 06:00:53 halley [ 0.159415] pci 0000:00:13.1: reg 10 32bit mmio: [0x92405000-0x92405fff] Feb 19 06:00:53 halley [ 0.159505] pci 0000:00:13.2: reg 10 32bit mmio: [0x92409400-0x924094ff] Feb 19 06:00:53 halley [ 0.159571] pci 0000:00:13.2: supports D1 D2 Feb 19 06:00:53 halley [ 0.159572] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot Feb 19 06:00:53 halley [ 0.159646] pci 0000:00:13.2: PME# disabled Feb 19 06:00:53 halley [ 0.159867] pci 0000:00:14.2: reg 10 64bit mmio: [0x92400000-0x92403fff] Feb 19 06:00:53 halley [ 0.159922] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold Feb 19 06:00:53 halley [ 0.160036] pci 0000:00:14.2: PME# disabled Feb 19 06:00:53 halley [ 0.160235] pci 0000:00:14.5: reg 10 32bit mmio: [0x92404000-0x92404fff] Feb 19 06:00:53 halley [ 0.160519] pci 0000:01:05.0: reg 10 32bit mmio: [0x80000000-0x8fffffff] Feb 19 06:00:53 halley [ 0.160524] pci 0000:01:05.0: reg 14 io port: [0x4000-0x40ff] Feb 19 06:00:53 halley [ 0.160529] pci 0000:01:05.0: reg 18 32bit mmio: [0x92300000-0x9230ffff] Feb 19 06:00:53 halley [ 0.160539] pci 0000:01:05.0: reg 24 32bit mmio: [0x92200000-0x922fffff] Feb 19 06:00:53 halley [ 0.160557] pci 0000:01:05.0: supports D1 D2 Feb 19 06:00:53 halley [ 0.160677] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] Feb 19 06:00:53 halley [ 0.160681] pci 0000:00:01.0: bridge 32bit mmio: [0x92200000-0x923fffff] Feb 19 06:00:53 halley [ 0.160687] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff] Feb 19 06:00:53 halley [ 0.160838] pci 0000:02:00.0: reg 10 64bit mmio: [0x91100000-0x91103fff] Feb 19 06:00:53 halley [ 0.160848] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff] Feb 19 06:00:53 halley [ 0.160937] pci 0000:02:00.0: supports D1 D2 Feb 19 06:00:53 halley [ 0.160939] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold Feb 19 06:00:53 halley [ 0.161095] pci 0000:02:00.0: PME# disabled Feb 19 06:00:53 halley [ 0.161245] pci 0000:00:04.0: bridge io port: [0x2000-0x3fff] Feb 19 06:00:53 halley [ 0.161248] pci 0000:00:04.0: bridge 32bit mmio: [0x91100000-0x921fffff] Feb 19 06:00:53 halley [ 0.161254] pci 0000:00:04.0: bridge 64bit mmio pref: [0x90000000-0x90ffffff] Feb 19 06:00:53 halley [ 0.161313] pci 0000:00:09.0: bridge 32bit mmio: [0x91000000-0x910fffff] Feb 19 06:00:53 halley [ 0.161383] pci 0000:00:14.4: transparent bridge Feb 19 06:00:53 halley [ 0.161457] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff] Feb 19 06:00:53 halley [ 0.161481] pci_bus 0000:00: on NUMA node 0 Feb 19 06:00:53 halley [ 0.161490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Feb 19 06:00:53 halley [ 0.161598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] Feb 19 06:00:53 halley [ 0.161679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] Feb 19 06:00:53 halley [ 0.161778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB9_._PRT] Feb 19 06:00:53 halley [ 0.161894] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] Feb 19 06:00:53 halley [ 0.175622] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Feb 19 06:00:53 halley [ 0.176492] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Feb 19 06:00:53 halley [ 0.177356] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Feb 19 06:00:53 halley [ 0.178210] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Feb 19 06:00:53 halley [ 0.179069] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Feb 19 06:00:53 halley [ 0.179929] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Feb 19 06:00:53 halley [ 0.180700] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Feb 19 06:00:53 halley [ 0.181491] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Feb 19 06:00:53 halley [ 0.182197] ACPI: Power Resource [APPR] (off) Feb 19 06:00:53 halley [ 0.182431] ACPI: Power Resource [PFN0] (off) Feb 19 06:00:53 halley [ 0.182656] ACPI: Power Resource [PFN1] (off) Feb 19 06:00:53 halley [ 0.182879] ACPI: Power Resource [PFN2] (off) Feb 19 06:00:53 halley [ 0.183102] ACPI: Power Resource [PFN3] (off) Feb 19 06:00:53 halley [ 0.183536] SCSI subsystem initialized Feb 19 06:00:53 halley [ 0.183685] libata version 3.00 loaded. Feb 19 06:00:53 halley [ 0.183815] PCI: Using ACPI for IRQ routing Feb 19 06:00:53 halley [ 0.196073] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 Feb 19 06:00:53 halley [ 0.196320] hpet0: 4 comparators, 32-bit 14.318180 MHz counter Feb 19 06:00:53 halley [ 0.200071] hpet: hpet2 irq 24 for MSI Feb 19 06:00:53 halley [ 0.219963] pnp: PnP ACPI init Feb 19 06:00:53 halley [ 0.220026] ACPI: bus type pnp registered Feb 19 06:00:53 halley [ 0.223957] pnp: PnP ACPI: found 11 devices Feb 19 06:00:53 halley [ 0.224083] ACPI: ACPI bus type pnp unregistered Feb 19 06:00:53 halley [ 0.224153] system 00:04: ioport range 0x400-0x4cf has been reserved Feb 19 06:00:53 halley [ 0.224215] system 00:04: ioport range 0x4d0-0x4d1 has been reserved Feb 19 06:00:53 halley [ 0.224276] system 00:04: ioport range 0x4d6-0x4d6 has been reserved Feb 19 06:00:53 halley [ 0.224336] system 00:04: ioport range 0x680-0x6ff has been reserved Feb 19 06:00:53 halley [ 0.224396] system 00:04: ioport range 0x77a-0x77a has been reserved Feb 19 06:00:53 halley [ 0.224457] system 00:04: ioport range 0xc00-0xc01 has been reserved Feb 19 06:00:53 halley [ 0.224517] system 00:04: ioport range 0xc14-0xc14 has been reserved Feb 19 06:00:53 halley [ 0.224577] system 00:04: ioport range 0xc50-0xc52 has been reserved Feb 19 06:00:53 halley [ 0.224638] system 00:04: ioport range 0xc6c-0xc6c has been reserved Feb 19 06:00:53 halley [ 0.224699] system 00:04: ioport range 0xc6f-0xc6f has been reserved Feb 19 06:00:53 halley [ 0.224760] system 00:04: ioport range 0xcd0-0xcdb has been reserved Feb 19 06:00:53 halley [ 0.225472] system 00:04: ioport range 0x220-0x227 has been reserved Feb 19 06:00:53 halley [ 0.225531] system 00:04: ioport range 0x260-0x273 has been reserved Feb 19 06:00:53 halley [ 0.225592] system 00:04: ioport range 0x800-0x800 has been reserved Feb 19 06:00:53 halley [ 0.225652] system 00:04: ioport range 0x804-0x804 has been reserved Feb 19 06:00:53 halley [ 0.225712] system 00:04: ioport range 0x87f-0x87f has been reserved Feb 19 06:00:53 halley [ 0.225772] system 00:04: ioport range 0xcdc-0xcdf has been reserved Feb 19 06:00:53 halley [ 0.225834] system 00:04: ioport range 0xb00-0xb0f has been reserved Feb 19 06:00:53 halley [ 0.225897] system 00:04: ioport range 0xb20-0xb3f has been reserved Feb 19 06:00:53 halley [ 0.225958] system 00:04: ioport range 0x200-0x27f could not be reserved Feb 19 06:00:53 halley [ 0.226022] system 00:05: iomem range 0x0-0x9ffff could not be reserved Feb 19 06:00:53 halley [ 0.226089] system 00:05: iomem range 0xec000-0xfffff could not be reserved Feb 19 06:00:53 halley [ 0.226160] system 00:05: iomem range 0x100000-0x7fffffff could not be reserved Feb 19 06:00:53 halley [ 0.226323] system 00:05: iomem range 0xe0000000-0xefffffff has been reserved Feb 19 06:00:53 halley [ 0.226394] system 00:05: iomem range 0xfeb00000-0xfeb00fff has been reserved Feb 19 06:00:53 halley [ 0.226467] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved Feb 19 06:00:53 halley [ 0.226540] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved Feb 19 06:00:53 halley [ 0.226613] system 00:05: iomem range 0xffe00000-0xffffffff has been reserved Feb 19 06:00:53 halley [ 0.232164] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 Feb 19 06:00:53 halley [ 0.232227] pci 0000:00:01.0: IO window: 0x4000-0x4fff Feb 19 06:00:53 halley [ 0.232291] pci 0000:00:01.0: MEM window: 0x92200000-0x923fffff Feb 19 06:00:53 halley [ 0.232352] pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff Feb 19 06:00:53 halley [ 0.232504] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 Feb 19 06:00:53 halley [ 0.232565] pci 0000:00:04.0: IO window: 0x2000-0x3fff Feb 19 06:00:53 halley [ 0.232627] pci 0000:00:04.0: MEM window: 0x91100000-0x921fffff Feb 19 06:00:53 halley [ 0.232689] pci 0000:00:04.0: PREFETCH window: 0x00000090000000-0x00000090ffffff Feb 19 06:00:53 halley [ 0.232840] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 Feb 19 06:00:53 halley [ 0.232900] pci 0000:00:09.0: IO window: disabled Feb 19 06:00:53 halley [ 0.232962] pci 0000:00:09.0: MEM window: 0x91000000-0x910fffff Feb 19 06:00:53 halley [ 0.233024] pci 0000:00:09.0: PREFETCH window: disabled Feb 19 06:00:53 halley [ 0.233086] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80 Feb 19 06:00:53 halley [ 0.233148] pci 0000:00:14.4: IO window: 0x1000-0x1fff Feb 19 06:00:53 halley [ 0.233212] pci 0000:00:14.4: MEM window: disabled Feb 19 06:00:53 halley [ 0.233275] pci 0000:00:14.4: PREFETCH window: disabled Feb 19 06:00:53 halley [ 0.233347] pci 0000:00:01.0: setting latency timer to 64 Feb 19 06:00:53 halley [ 0.233354] pci 0000:00:04.0: setting latency timer to 64 Feb 19 06:00:53 halley [ 0.233360] pci 0000:00:09.0: setting latency timer to 64 Feb 19 06:00:53 halley [ 0.233368] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Feb 19 06:00:53 halley [ 0.233371] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] Feb 19 06:00:53 halley [ 0.233373] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] Feb 19 06:00:53 halley [ 0.233375] pci_bus 0000:01: resource 1 mem: [0x92200000-0x923fffff] Feb 19 06:00:53 halley [ 0.233377] pci_bus 0000:01: resource 2 mem: [0x80000000-0x8fffffff] Feb 19 06:00:53 halley [ 0.233379] pci_bus 0000:01: resource 3 mem: [0x0-0x0] Feb 19 06:00:53 halley [ 0.233382] pci_bus 0000:02: resource 0 io: [0x2000-0x3fff] Feb 19 06:00:53 halley [ 0.233384] pci_bus 0000:02: resource 1 mem: [0x91100000-0x921fffff] Feb 19 06:00:53 halley [ 0.233386] pci_bus 0000:02: resource 2 mem: [0x90000000-0x90ffffff] Feb 19 06:00:53 halley [ 0.233388] pci_bus 0000:02: resource 3 mem: [0x0-0x0] Feb 19 06:00:53 halley [ 0.233390] pci_bus 0000:03: resource 0 mem: [0x0-0x0] Feb 19 06:00:53 halley [ 0.233392] pci_bus 0000:03: resource 1 mem: [0x91000000-0x910fffff] Feb 19 06:00:53 halley [ 0.233394] pci_bus 0000:03: resource 2 mem: [0x0-0x0] Feb 19 06:00:53 halley [ 0.233396] pci_bus 0000:03: resource 3 mem: [0x0-0x0] Feb 19 06:00:53 halley [ 0.233398] pci_bus 0000:80: resource 0 io: [0x1000-0x1fff] Feb 19 06:00:53 halley [ 0.233400] pci_bus 0000:80: resource 1 mem: [0x0-0x0] Feb 19 06:00:53 halley [ 0.233402] pci_bus 0000:80: resource 2 mem: [0x0-0x0] Feb 19 06:00:53 halley [ 0.233404] pci_bus 0000:80: resource 3 io: [0x00-0xffff] Feb 19 06:00:53 halley [ 0.233406] pci_bus 0000:80: resource 4 mem: [0x000000-0xffffffffffffffff] Feb 19 06:00:53 halley [ 0.233438] NET: Registered protocol family 2 Feb 19 06:00:53 halley [ 0.275883] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Feb 19 06:00:53 halley [ 0.276593] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Feb 19 06:00:53 halley [ 0.279957] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Feb 19 06:00:53 halley [ 0.280490] TCP: Hash tables configured (established 262144 bind 65536) Feb 19 06:00:53 halley [ 0.280617] TCP reno registered Feb 19 06:00:53 halley [ 0.291848] NET: Registered protocol family 1 Feb 19 06:00:53 halley [ 0.292647] microcode: CPU0: patch_level=0x2000032 Feb 19 06:00:53 halley [ 0.292772] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba Feb 19 06:00:53 halley [ 0.295433] msgmni has been set to 3509 Feb 19 06:00:53 halley [ 0.295721] alg: No test for stdrng (krng) Feb 19 06:00:53 halley [ 0.295940] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Feb 19 06:00:53 halley [ 0.296167] io scheduler noop registered Feb 19 06:00:53 halley [ 0.296235] io scheduler anticipatory registered Feb 19 06:00:53 halley [ 0.296304] io scheduler deadline registered Feb 19 06:00:53 halley [ 0.296420] io scheduler cfq registered (default) Feb 19 06:00:53 halley [ 0.296663] pci 0000:01:05.0: Boot video device Feb 19 06:00:53 halley [ 0.296755] pcieport-driver 0000:00:04.0: setting latency timer to 64 Feb 19 06:00:53 halley [ 0.296814] pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X Feb 19 06:00:53 halley [ 0.296919] pcieport-driver 0000:00:09.0: setting latency timer to 64 Feb 19 06:00:53 halley [ 0.296965] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X Feb 19 06:00:53 halley [ 0.304005] ACPI: AC Adapter [AC] (on-line) Feb 19 06:00:53 halley [ 0.363805] ACPI: Battery Slot [BAT0] (battery present) Feb 19 06:00:53 halley [ 0.364545] input: Power Button (FF) as /class/input/input0 Feb 19 06:00:53 halley [ 0.364670] ACPI: Power Button (FF) [PWRF] Feb 19 06:00:53 halley [ 0.364792] input: Sleep Button (CM) as /class/input/input1 Feb 19 06:00:53 halley [ 0.364916] ACPI: Sleep Button (CM) [SLPB] Feb 19 06:00:53 halley [ 0.365027] input: Lid Switch as /class/input/input2 Feb 19 06:00:53 halley [ 0.365222] ACPI: Lid Switch [LID] Feb 19 06:00:53 halley [ 0.365609] fan PNP0C0B:00: registered as cooling_device0 Feb 19 06:00:53 halley [ 0.365737] ACPI: Fan [FAN0] (off) Feb 19 06:00:53 halley [ 0.366018] fan PNP0C0B:01: registered as cooling_device1 Feb 19 06:00:53 halley [ 0.366147] ACPI: Fan [FAN1] (off) Feb 19 06:00:53 halley [ 0.366426] fan PNP0C0B:02: registered as cooling_device2 Feb 19 06:00:53 halley [ 0.366553] ACPI: Fan [FAN2] (off) Feb 19 06:00:53 halley [ 0.366832] fan PNP0C0B:03: registered as cooling_device3 Feb 19 06:00:53 halley [ 0.366960] ACPI: Fan [FAN3] (off) Feb 19 06:00:53 halley [ 0.367209] processor ACPI_CPU:00: registered as cooling_device4 Feb 19 06:00:53 halley [ 0.367345] ACPI: Processor [CPU0] (supports 8 throttling states) Feb 19 06:00:53 halley [ 0.377298] thermal LNXTHERM:01: registered as thermal_zone0 Feb 19 06:00:53 halley [ 0.384693] ACPI: Thermal Zone [CPUZ] (55 C) Feb 19 06:00:53 halley [ 0.420020] Non-volatile memory driver v1.3 Feb 19 06:00:53 halley [ 0.420148] Linux agpgart interface v0.103 Feb 19 06:00:53 halley [ 0.420206] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Feb 19 06:00:53 halley [ 0.421725] brd: module loaded Feb 19 06:00:53 halley [ 0.422350] loop: module loaded Feb 19 06:00:53 halley [ 0.422478] Uniform Multi-Platform E-IDE driver Feb 19 06:00:53 halley [ 0.422613] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Feb 19 06:00:53 halley [ 0.422839] Probing IDE interface ide0... Feb 19 06:00:53 halley [ 0.503247] Switched to high resolution mode on CPU 0 Feb 19 06:00:53 halley [ 0.984142] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Feb 19 06:00:53 halley [ 0.984245] Probing IDE interface ide1... Feb 19 06:00:53 halley [ 1.544057] ide1 at 0x170-0x177,0x376 on irq 15 Feb 19 06:00:53 halley [ 1.544176] ide-gd driver 1.18 Feb 19 06:00:53 halley [ 1.544257] ide-cd driver 5.00 Feb 19 06:00:53 halley [ 1.544377] Loading iSCSI transport class v2.0-870. Feb 19 06:00:53 halley [ 1.544646] Driver 'sd' needs updating - please use bus_type methods Feb 19 06:00:53 halley [ 1.544794] Driver 'sr' needs updating - please use bus_type methods Feb 19 06:00:53 halley [ 1.544914] ahci 0000:00:11.0: version 3.0 Feb 19 06:00:53 halley [ 1.545000] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Feb 19 06:00:53 halley [ 1.545292] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Feb 19 06:00:53 halley [ 1.545444] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio Feb 19 06:00:53 halley [ 1.546551] scsi0 : ahci Feb 19 06:00:53 halley [ 1.546750] scsi1 : ahci Feb 19 06:00:53 halley [ 1.546931] scsi2 : ahci Feb 19 06:00:53 halley [ 1.547114] scsi3 : ahci Feb 19 06:00:53 halley [ 1.547293] scsi4 : ahci Feb 19 06:00:53 halley [ 1.547468] scsi5 : ahci Feb 19 06:00:53 halley [ 1.547792] ata1: SATA max UDMA/133 abar m1024@0x92409000 port 0x92409100 irq 20 Feb 19 06:00:53 halley [ 1.547942] ata2: SATA max UDMA/133 abar m1024@0x92409000 port 0x92409180 irq 20 Feb 19 06:00:53 halley [ 1.548062] ata3: SATA max UDMA/133 abar m1024@0x92409000 port 0x92409200 irq 20 Feb 19 06:00:53 halley [ 1.548211] ata4: SATA max UDMA/133 abar m1024@0x92409000 port 0x92409280 irq 20 Feb 19 06:00:53 halley [ 1.548360] ata5: SATA max UDMA/133 abar m1024@0x92409000 port 0x92409300 irq 20 Feb 19 06:00:53 halley [ 1.548509] ata6: SATA max UDMA/133 abar m1024@0x92409000 port 0x92409380 irq 20 Feb 19 06:00:53 halley [ 1.868074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 19 06:00:53 halley [ 1.868572] ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100 Feb 19 06:00:53 halley [ 1.868632] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) Feb 19 06:00:53 halley [ 1.869322] ata1.00: configured for UDMA/100 Feb 19 06:00:53 halley [ 1.900133] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 8909 PQ: 0 ANSI: 5 Feb 19 06:00:53 halley [ 1.900459] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) Feb 19 06:00:53 halley [ 1.900682] sd 0:0:0:0: [sda] Write Protect is off Feb 19 06:00:53 halley [ 1.900742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 19 06:00:53 halley [ 1.900758] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 19 06:00:53 halley [ 1.900955] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) Feb 19 06:00:53 halley [ 1.901175] sd 0:0:0:0: [sda] Write Protect is off Feb 19 06:00:53 halley [ 1.901234] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 19 06:00:53 halley [ 1.901249] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 19 06:00:53 halley [ 1.901400] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > Feb 19 06:00:53 halley [ 1.952168] sd 0:0:0:0: [sda] Attached SCSI disk Feb 19 06:00:53 halley [ 1.952373] sd 0:0:0:0: Attached scsi generic sg0 type 0 Feb 19 06:00:53 halley [ 2.272073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 19 06:00:53 halley [ 2.284929] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0400, max UDMA/100 Feb 19 06:00:53 halley [ 2.300078] ata2.00: configured for UDMA/100 Feb 19 06:00:53 halley [ 2.336902] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633L 0400 PQ: 0 ANSI: 5 Feb 19 06:00:53 halley [ 2.349189] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Feb 19 06:00:53 halley [ 2.349339] Uniform CD-ROM driver Revision: 3.20 Feb 19 06:00:53 halley [ 2.349511] sr 1:0:0:0: Attached scsi CD-ROM sr0 Feb 19 06:00:53 halley [ 2.349577] sr 1:0:0:0: Attached scsi generic sg1 type 5 Feb 19 06:00:53 halley [ 2.668070] ata3: SATA link down (SStatus 0 SControl 300) Feb 19 06:00:53 halley [ 3.020069] ata4: SATA link down (SStatus 0 SControl 300) Feb 19 06:00:53 halley [ 3.372069] ata5: SATA link down (SStatus 0 SControl 300) Feb 19 06:00:53 halley [ 3.724069] ata6: SATA link down (SStatus 0 SControl 300) Feb 19 06:00:53 halley [ 3.756161] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Feb 19 06:00:53 halley [ 3.759078] i8042.c: Detected active multiplexing controller, rev 1.1. Feb 19 06:00:53 halley [ 3.760627] serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 19 06:00:53 halley [ 3.760689] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Feb 19 06:00:53 halley [ 3.760748] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Feb 19 06:00:53 halley [ 3.760807] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Feb 19 06:00:53 halley [ 3.760865] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Feb 19 06:00:53 halley [ 3.760974] mice: PS/2 mouse device common for all mice Feb 19 06:00:53 halley [ 3.804337] rtc_cmos 00:06: RTC can wake from S4 Feb 19 06:00:53 halley [ 3.804446] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 Feb 19 06:00:53 halley [ 3.804601] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs Feb 19 06:00:53 halley [ 3.804697] cpuidle: using governor ladder Feb 19 06:00:53 halley [ 3.804757] cpuidle: using governor menu Feb 19 06:00:53 halley [ 3.805143] ip_tables: (C) 2000-2006 Netfilter Core Team Feb 19 06:00:53 halley [ 3.805286] TCP cubic registered Feb 19 06:00:53 halley [ 3.805343] NET: Registered protocol family 17 Feb 19 06:00:53 halley [ 3.805660] Magic number: 13:783:9 Feb 19 06:00:53 halley [ 3.805951] rtc_cmos 00:06: setting system clock to 2009-02-19 04:00:44 UTC (1235016044) Feb 19 06:00:53 halley [ 3.825700] input: AT Translated Set 2 keyboard as /class/input/input3 Feb 19 06:00:53 halley [ 4.498437] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0x200000 Feb 19 06:00:53 halley [ 4.540565] input: SynPS/2 Synaptics TouchPad as /class/input/input4 Feb 19 06:00:53 halley [ 4.677668] EXT3-fs: mounted filesystem with ordered data mode. Feb 19 06:00:53 halley [ 4.677737] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Feb 19 06:00:53 halley [ 4.677810] Freeing unused kernel memory: 332k freed Feb 19 06:00:53 halley [ 4.678046] Write protecting the kernel read-only data: 3940k Feb 19 06:00:53 halley [ 4.678382] kjournald starting. Commit interval 5 seconds Feb 19 06:00:53 halley [ 6.963951] ACPI: WMI: Mapper loaded Feb 19 06:00:53 halley [ 7.052266] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 Feb 19 06:00:53 halley [ 7.097611] usbcore: registered new interface driver usbfs Feb 19 06:00:53 halley [ 7.097638] usbcore: registered new interface driver hub Feb 19 06:00:53 halley [ 7.098226] usbcore: registered new device driver usb Feb 19 06:00:53 halley [ 7.143646] sky2 driver version 1.22 Feb 19 06:00:53 halley [ 7.143738] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Feb 19 06:00:53 halley [ 7.143766] sky2 0000:02:00.0: setting latency timer to 64 Feb 19 06:00:53 halley [ 7.143882] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0 Feb 19 06:00:53 halley [ 7.144140] sky2 0000:02:00.0: irq 27 for MSI/MSI-X Feb 19 06:00:53 halley [ 7.144466] sky2 eth0: addr 00:22:64:4f:71:6b Feb 19 06:00:53 halley [ 7.294601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Feb 19 06:00:53 halley [ 7.294606] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 Feb 19 06:00:53 halley [ 7.294714] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Feb 19 06:00:53 halley [ 7.294740] ehci_hcd 0000:00:12.2: setting latency timer to 64 Feb 19 06:00:53 halley [ 7.294744] ehci_hcd 0000:00:12.2: EHCI Host Controller Feb 19 06:00:53 halley [ 7.294787] drivers/usb/core/inode.c: creating file 'devices' Feb 19 06:00:53 halley [ 7.294791] drivers/usb/core/inode.c: creating file '001' Feb 19 06:00:53 halley [ 7.294795] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 Feb 19 06:00:53 halley [ 7.294869] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 Feb 19 06:00:53 halley [ 7.294873] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 Feb 19 06:00:53 halley [ 7.294902] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround Feb 19 06:00:53 halley [ 7.294910] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Feb 19 06:00:53 halley [ 7.294927] ehci_hcd 0000:00:12.2: debug port 1 Feb 19 06:00:53 halley [ 7.294931] ehci_hcd 0000:00:12.2: MWI active Feb 19 06:00:53 halley [ 7.294933] ehci_hcd 0000:00:12.2: supports USB remote wakeup Feb 19 06:00:53 halley [ 7.294947] ehci_hcd 0000:00:12.2: irq 17, io mem 0x92409500 Feb 19 06:00:53 halley [ 7.294952] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Feb 19 06:00:53 halley [ 7.294958] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1 period=256 RUN Feb 19 06:00:53 halley [ 7.304083] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 Feb 19 06:00:53 halley [ 7.304124] usb usb1: default language 0x0409 Feb 19 06:00:53 halley [ 7.304130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Feb 19 06:00:53 halley [ 7.304132] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 19 06:00:53 halley [ 7.304134] usb usb1: Product: EHCI Host Controller Feb 19 06:00:53 halley [ 7.304136] usb usb1: Manufacturer: Linux 2.6.29-rc4 ehci_hcd Feb 19 06:00:53 halley [ 7.304138] usb usb1: SerialNumber: 0000:00:12.2 Feb 19 06:00:53 halley [ 7.304191] usb usb1: uevent Feb 19 06:00:53 halley [ 7.304206] usb usb1: usb_probe_device Feb 19 06:00:53 halley [ 7.304208] usb usb1: configuration #1 chosen from 1 choice Feb 19 06:00:53 halley [ 7.304215] usb usb1: adding 1-0:1.0 (config #1, interface 0) Feb 19 06:00:53 halley [ 7.304226] usb 1-0:1.0: uevent Feb 19 06:00:53 halley [ 7.304237] hub 1-0:1.0: usb_probe_interface Feb 19 06:00:53 halley [ 7.304238] hub 1-0:1.0: usb_probe_interface - got id Feb 19 06:00:53 halley [ 7.304240] hub 1-0:1.0: USB hub found Feb 19 06:00:53 halley [ 7.304250] hub 1-0:1.0: 6 ports detected Feb 19 06:00:53 halley [ 7.304251] hub 1-0:1.0: standalone hub Feb 19 06:00:53 halley [ 7.304253] hub 1-0:1.0: no power switching (usb 1.0) Feb 19 06:00:53 halley [ 7.304254] hub 1-0:1.0: individual port over-current protection Feb 19 06:00:53 halley [ 7.304256] hub 1-0:1.0: power on to power good time: 20ms Feb 19 06:00:53 halley [ 7.304260] hub 1-0:1.0: local power source is good Feb 19 06:00:53 halley [ 7.304262] hub 1-0:1.0: trying to enable port power on non-switchable hub Feb 19 06:00:53 halley [ 7.304392] drivers/usb/core/inode.c: creating file '001' Feb 19 06:00:53 halley [ 7.304509] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Feb 19 06:00:53 halley [ 7.304538] ehci_hcd 0000:00:13.2: setting latency timer to 64 Feb 19 06:00:53 halley [ 7.304541] ehci_hcd 0000:00:13.2: EHCI Host Controller Feb 19 06:00:53 halley [ 7.304561] drivers/usb/core/inode.c: creating file '002' Feb 19 06:00:53 halley [ 7.304566] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 Feb 19 06:00:53 halley [ 7.304575] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 Feb 19 06:00:53 halley [ 7.304579] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 Feb 19 06:00:53 halley [ 7.304606] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround Feb 19 06:00:53 halley [ 7.304614] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Feb 19 06:00:53 halley [ 7.304630] ehci_hcd 0000:00:13.2: debug port 1 Feb 19 06:00:53 halley [ 7.304635] ehci_hcd 0000:00:13.2: MWI active Feb 19 06:00:53 halley [ 7.304637] ehci_hcd 0000:00:13.2: supports USB remote wakeup Feb 19 06:00:53 halley [ 7.304652] ehci_hcd 0000:00:13.2: irq 19, io mem 0x92409400 Feb 19 06:00:53 halley [ 7.304656] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Feb 19 06:00:53 halley [ 7.304663] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN Feb 19 06:00:53 halley [ 7.316071] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 Feb 19 06:00:53 halley [ 7.316107] usb usb2: default language 0x0409 Feb 19 06:00:53 halley [ 7.316113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Feb 19 06:00:53 halley [ 7.316115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 19 06:00:53 halley [ 7.316118] usb usb2: Product: EHCI Host Controller Feb 19 06:00:53 halley [ 7.316120] usb usb2: Manufacturer: Linux 2.6.29-rc4 ehci_hcd Feb 19 06:00:53 halley [ 7.316121] usb usb2: SerialNumber: 0000:00:13.2 Feb 19 06:00:53 halley [ 7.316184] usb usb2: uevent Feb 19 06:00:53 halley [ 7.316199] usb usb2: usb_probe_device Feb 19 06:00:53 halley [ 7.316202] usb usb2: configuration #1 chosen from 1 choice Feb 19 06:00:53 halley [ 7.316208] usb usb2: adding 2-0:1.0 (config #1, interface 0) Feb 19 06:00:53 halley [ 7.316219] usb 2-0:1.0: uevent Feb 19 06:00:53 halley [ 7.316229] hub 2-0:1.0: usb_probe_interface Feb 19 06:00:53 halley [ 7.316230] hub 2-0:1.0: usb_probe_interface - got id Feb 19 06:00:53 halley [ 7.316232] hub 2-0:1.0: USB hub found Feb 19 06:00:53 halley [ 7.316241] hub 2-0:1.0: 6 ports detected Feb 19 06:00:53 halley [ 7.316242] hub 2-0:1.0: standalone hub Feb 19 06:00:53 halley [ 7.316244] hub 2-0:1.0: no power switching (usb 1.0) Feb 19 06:00:53 halley [ 7.316245] hub 2-0:1.0: individual port over-current protection Feb 19 06:00:53 halley [ 7.316247] hub 2-0:1.0: power on to power good time: 20ms Feb 19 06:00:53 halley [ 7.316250] hub 2-0:1.0: local power source is good Feb 19 06:00:53 halley [ 7.316253] hub 2-0:1.0: trying to enable port power on non-switchable hub Feb 19 06:00:53 halley [ 7.316365] drivers/usb/core/inode.c: creating file '001' Feb 19 06:00:53 halley [ 7.338976] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Feb 19 06:00:53 halley [ 7.338980] ohci_hcd: block sizes: ed 80 td 96 Feb 19 06:00:53 halley [ 7.339079] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Feb 19 06:00:53 halley [ 7.339105] ohci_hcd 0000:00:12.0: setting latency timer to 64 Feb 19 06:00:53 halley [ 7.339108] ohci_hcd 0000:00:12.0: OHCI Host Controller Feb 19 06:00:53 halley [ 7.339139] drivers/usb/core/inode.c: creating file '003' Feb 19 06:00:53 halley [ 7.339146] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 Feb 19 06:00:53 halley [ 7.339225] ohci_hcd 0000:00:12.0: enabled AMD ISO transfers quirk Feb 19 06:00:53 halley [ 7.339240] ohci_hcd 0000:00:12.0: created debug files Feb 19 06:00:53 halley [ 7.339242] ohci_hcd 0000:00:12.0: supports USB remote wakeup Feb 19 06:00:53 halley [ 7.339260] ohci_hcd 0000:00:12.0: irq 16, io mem 0x92408000 Feb 19 06:00:53 halley [ 7.396069] ohci_hcd 0000:00:12.0: OHCI controller state Feb 19 06:00:53 halley [ 7.396075] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers Feb 19 06:00:53 halley [ 7.396080] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3 Feb 19 06:00:53 halley [ 7.396084] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 Feb 19 06:00:53 halley [ 7.396088] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF Feb 19 06:00:53 halley [ 7.396092] ohci_hcd 0000:00:12.0: intrenable 0x8000001a MIE UE RD WDH Feb 19 06:00:53 halley [ 7.396102] ohci_hcd 0000:00:12.0: hcca frame #0005 Feb 19 06:00:53 halley [ 7.396106] ohci_hcd 0000:00:12.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) Feb 19 06:00:53 halley [ 7.396110] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 Feb 19 06:00:53 halley [ 7.396113] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE Feb 19 06:00:53 halley [ 7.396118] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.396122] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.396125] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.396145] usb usb3: default language 0x0409 Feb 19 06:00:53 halley [ 7.396151] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Feb 19 06:00:53 halley [ 7.396153] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 19 06:00:53 halley [ 7.396156] usb usb3: Product: OHCI Host Controller Feb 19 06:00:53 halley [ 7.396157] usb usb3: Manufacturer: Linux 2.6.29-rc4 ohci_hcd Feb 19 06:00:53 halley [ 7.396159] usb usb3: SerialNumber: 0000:00:12.0 Feb 19 06:00:53 halley [ 7.396218] usb usb3: uevent Feb 19 06:00:53 halley [ 7.396233] usb usb3: usb_probe_device Feb 19 06:00:53 halley [ 7.396236] usb usb3: configuration #1 chosen from 1 choice Feb 19 06:00:53 halley [ 7.396242] usb usb3: adding 3-0:1.0 (config #1, interface 0) Feb 19 06:00:53 halley [ 7.396253] usb 3-0:1.0: uevent Feb 19 06:00:53 halley [ 7.396264] hub 3-0:1.0: usb_probe_interface Feb 19 06:00:53 halley [ 7.396265] hub 3-0:1.0: usb_probe_interface - got id Feb 19 06:00:53 halley [ 7.396267] hub 3-0:1.0: USB hub found Feb 19 06:00:53 halley [ 7.396342] hub 3-0:1.0: 3 ports detected Feb 19 06:00:53 halley [ 7.396343] hub 3-0:1.0: standalone hub Feb 19 06:00:53 halley [ 7.396345] hub 3-0:1.0: no power switching (usb 1.0) Feb 19 06:00:53 halley [ 7.396347] hub 3-0:1.0: global over-current protection Feb 19 06:00:53 halley [ 7.396348] hub 3-0:1.0: power on to power good time: 4ms Feb 19 06:00:53 halley [ 7.396353] hub 3-0:1.0: local power source is good Feb 19 06:00:53 halley [ 7.396355] hub 3-0:1.0: no over-current condition exists Feb 19 06:00:53 halley [ 7.396357] hub 3-0:1.0: trying to enable port power on non-switchable hub Feb 19 06:00:53 halley [ 7.396391] drivers/usb/core/inode.c: creating file '001' Feb 19 06:00:53 halley [ 7.396509] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Feb 19 06:00:53 halley [ 7.396542] ohci_hcd 0000:00:12.1: setting latency timer to 64 Feb 19 06:00:53 halley [ 7.396546] ohci_hcd 0000:00:12.1: OHCI Host Controller Feb 19 06:00:53 halley [ 7.396566] drivers/usb/core/inode.c: creating file '004' Feb 19 06:00:53 halley [ 7.396571] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 Feb 19 06:00:53 halley [ 7.396578] ohci_hcd 0000:00:12.1: enabled AMD ISO transfers quirk Feb 19 06:00:53 halley [ 7.396595] ohci_hcd 0000:00:12.1: created debug files Feb 19 06:00:53 halley [ 7.396597] ohci_hcd 0000:00:12.1: supports USB remote wakeup Feb 19 06:00:53 halley [ 7.396605] ohci_hcd 0000:00:12.1: irq 16, io mem 0x92407000 Feb 19 06:00:53 halley [ 7.404110] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 Feb 19 06:00:53 halley [ 7.416091] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 Feb 19 06:00:53 halley [ 7.456394] ohci_hcd 0000:00:12.1: OHCI controller state Feb 19 06:00:53 halley [ 7.456434] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers Feb 19 06:00:53 halley [ 7.456439] ohci_hcd 0000:00:12.1: control 0x283 RWC HCFS=operational CBSR=3 Feb 19 06:00:53 halley [ 7.456443] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0 Feb 19 06:00:53 halley [ 7.456447] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF Feb 19 06:00:53 halley [ 7.456451] ohci_hcd 0000:00:12.1: intrenable 0x8000001a MIE UE RD WDH Feb 19 06:00:53 halley [ 7.456462] ohci_hcd 0000:00:12.1: hcca frame #0005 Feb 19 06:00:53 halley [ 7.456466] ohci_hcd 0000:00:12.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) Feb 19 06:00:53 halley [ 7.456470] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000 Feb 19 06:00:53 halley [ 7.456473] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE Feb 19 06:00:53 halley [ 7.456478] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.456482] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.456486] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.456506] usb usb4: default language 0x0409 Feb 19 06:00:53 halley [ 7.456512] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Feb 19 06:00:53 halley [ 7.456514] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 19 06:00:53 halley [ 7.456516] usb usb4: Product: OHCI Host Controller Feb 19 06:00:53 halley [ 7.456518] usb usb4: Manufacturer: Linux 2.6.29-rc4 ohci_hcd Feb 19 06:00:53 halley [ 7.456520] usb usb4: SerialNumber: 0000:00:12.1 Feb 19 06:00:53 halley [ 7.456557] usb usb4: uevent Feb 19 06:00:53 halley [ 7.456569] usb usb4: usb_probe_device Feb 19 06:00:53 halley [ 7.456571] usb usb4: configuration #1 chosen from 1 choice Feb 19 06:00:53 halley [ 7.456578] usb usb4: adding 4-0:1.0 (config #1, interface 0) Feb 19 06:00:53 halley [ 7.456590] usb 4-0:1.0: uevent Feb 19 06:00:53 halley [ 7.456600] hub 4-0:1.0: usb_probe_interface Feb 19 06:00:53 halley [ 7.456602] hub 4-0:1.0: usb_probe_interface - got id Feb 19 06:00:53 halley [ 7.456604] hub 4-0:1.0: USB hub found Feb 19 06:00:53 halley [ 7.456680] hub 4-0:1.0: 3 ports detected Feb 19 06:00:53 halley [ 7.456681] hub 4-0:1.0: standalone hub Feb 19 06:00:53 halley [ 7.456683] hub 4-0:1.0: no power switching (usb 1.0) Feb 19 06:00:53 halley [ 7.456684] hub 4-0:1.0: global over-current protection Feb 19 06:00:53 halley [ 7.456686] hub 4-0:1.0: power on to power good time: 4ms Feb 19 06:00:53 halley [ 7.456690] hub 4-0:1.0: local power source is good Feb 19 06:00:53 halley [ 7.456692] hub 4-0:1.0: no over-current condition exists Feb 19 06:00:53 halley [ 7.456694] hub 4-0:1.0: trying to enable port power on non-switchable hub Feb 19 06:00:53 halley [ 7.456726] drivers/usb/core/inode.c: creating file '001' Feb 19 06:00:53 halley [ 7.456849] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Feb 19 06:00:53 halley [ 7.456878] ohci_hcd 0000:00:13.0: setting latency timer to 64 Feb 19 06:00:53 halley [ 7.456882] ohci_hcd 0000:00:13.0: OHCI Host Controller Feb 19 06:00:53 halley [ 7.456903] drivers/usb/core/inode.c: creating file '005' Feb 19 06:00:53 halley [ 7.456907] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 Feb 19 06:00:53 halley [ 7.456917] ohci_hcd 0000:00:13.0: enabled AMD ISO transfers quirk Feb 19 06:00:53 halley [ 7.456933] ohci_hcd 0000:00:13.0: created debug files Feb 19 06:00:53 halley [ 7.456934] ohci_hcd 0000:00:13.0: supports USB remote wakeup Feb 19 06:00:53 halley [ 7.456941] ohci_hcd 0000:00:13.0: irq 17, io mem 0x92406000 Feb 19 06:00:53 halley [ 7.496093] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000 Feb 19 06:00:53 halley [ 7.516063] ohci_hcd 0000:00:13.0: OHCI controller state Feb 19 06:00:53 halley [ 7.516067] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers Feb 19 06:00:53 halley [ 7.516072] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3 Feb 19 06:00:53 halley [ 7.516076] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 Feb 19 06:00:53 halley [ 7.516080] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF Feb 19 06:00:53 halley [ 7.516084] ohci_hcd 0000:00:13.0: intrenable 0x8000001a MIE UE RD WDH Feb 19 06:00:53 halley [ 7.516094] ohci_hcd 0000:00:13.0: hcca frame #0005 Feb 19 06:00:53 halley [ 7.516098] ohci_hcd 0000:00:13.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) Feb 19 06:00:53 halley [ 7.516102] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 Feb 19 06:00:53 halley [ 7.516105] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE Feb 19 06:00:53 halley [ 7.516110] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.516113] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.516117] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.516132] usb usb5: default language 0x0409 Feb 19 06:00:53 halley [ 7.516138] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Feb 19 06:00:53 halley [ 7.516140] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 19 06:00:53 halley [ 7.516142] usb usb5: Product: OHCI Host Controller Feb 19 06:00:53 halley [ 7.516144] usb usb5: Manufacturer: Linux 2.6.29-rc4 ohci_hcd Feb 19 06:00:53 halley [ 7.516145] usb usb5: SerialNumber: 0000:00:13.0 Feb 19 06:00:53 halley [ 7.516207] usb usb5: uevent Feb 19 06:00:53 halley [ 7.516223] usb usb5: usb_probe_device Feb 19 06:00:53 halley [ 7.516226] usb usb5: configuration #1 chosen from 1 choice Feb 19 06:00:53 halley [ 7.516233] usb usb5: adding 5-0:1.0 (config #1, interface 0) Feb 19 06:00:53 halley [ 7.516244] usb 5-0:1.0: uevent Feb 19 06:00:53 halley [ 7.516255] hub 5-0:1.0: usb_probe_interface Feb 19 06:00:53 halley [ 7.516257] hub 5-0:1.0: usb_probe_interface - got id Feb 19 06:00:53 halley [ 7.516259] hub 5-0:1.0: USB hub found Feb 19 06:00:53 halley [ 7.516305] hub 5-0:1.0: 3 ports detected Feb 19 06:00:53 halley [ 7.516306] hub 5-0:1.0: standalone hub Feb 19 06:00:53 halley [ 7.516308] hub 5-0:1.0: no power switching (usb 1.0) Feb 19 06:00:53 halley [ 7.516310] hub 5-0:1.0: global over-current protection Feb 19 06:00:53 halley [ 7.516311] hub 5-0:1.0: power on to power good time: 4ms Feb 19 06:00:53 halley [ 7.516316] hub 5-0:1.0: local power source is good Feb 19 06:00:53 halley [ 7.516317] hub 5-0:1.0: no over-current condition exists Feb 19 06:00:53 halley [ 7.516320] hub 5-0:1.0: trying to enable port power on non-switchable hub Feb 19 06:00:53 halley [ 7.516351] drivers/usb/core/inode.c: creating file '001' Feb 19 06:00:53 halley [ 7.516412] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Feb 19 06:00:53 halley [ 7.516440] ohci_hcd 0000:00:13.1: setting latency timer to 64 Feb 19 06:00:53 halley [ 7.516443] ohci_hcd 0000:00:13.1: OHCI Host Controller Feb 19 06:00:53 halley [ 7.516463] drivers/usb/core/inode.c: creating file '006' Feb 19 06:00:53 halley [ 7.516471] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 Feb 19 06:00:53 halley [ 7.516478] ohci_hcd 0000:00:13.1: enabled AMD ISO transfers quirk Feb 19 06:00:53 halley [ 7.516494] ohci_hcd 0000:00:13.1: created debug files Feb 19 06:00:53 halley [ 7.516496] ohci_hcd 0000:00:13.1: supports USB remote wakeup Feb 19 06:00:53 halley [ 7.516504] ohci_hcd 0000:00:13.1: irq 17, io mem 0x92405000 Feb 19 06:00:53 halley [ 7.556064] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000 Feb 19 06:00:53 halley [ 7.576050] ohci_hcd 0000:00:13.1: OHCI controller state Feb 19 06:00:53 halley [ 7.576094] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers Feb 19 06:00:53 halley [ 7.576099] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3 Feb 19 06:00:53 halley [ 7.576102] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 Feb 19 06:00:53 halley [ 7.576107] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF Feb 19 06:00:53 halley [ 7.576110] ohci_hcd 0000:00:13.1: intrenable 0x8000001a MIE UE RD WDH Feb 19 06:00:53 halley [ 7.576121] ohci_hcd 0000:00:13.1: hcca frame #0005 Feb 19 06:00:53 halley [ 7.576125] ohci_hcd 0000:00:13.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) Feb 19 06:00:53 halley [ 7.576129] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 Feb 19 06:00:53 halley [ 7.576133] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE Feb 19 06:00:53 halley [ 7.576137] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.576141] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.576145] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.576164] usb usb6: default language 0x0409 Feb 19 06:00:53 halley [ 7.576170] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 Feb 19 06:00:53 halley [ 7.576172] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 19 06:00:53 halley [ 7.576174] usb usb6: Product: OHCI Host Controller Feb 19 06:00:53 halley [ 7.576176] usb usb6: Manufacturer: Linux 2.6.29-rc4 ohci_hcd Feb 19 06:00:53 halley [ 7.576178] usb usb6: SerialNumber: 0000:00:13.1 Feb 19 06:00:53 halley [ 7.576240] usb usb6: uevent Feb 19 06:00:53 halley [ 7.576255] usb usb6: usb_probe_device Feb 19 06:00:53 halley [ 7.576258] usb usb6: configuration #1 chosen from 1 choice Feb 19 06:00:53 halley [ 7.576265] usb usb6: adding 6-0:1.0 (config #1, interface 0) Feb 19 06:00:53 halley [ 7.576276] usb 6-0:1.0: uevent Feb 19 06:00:53 halley [ 7.576287] hub 6-0:1.0: usb_probe_interface Feb 19 06:00:53 halley [ 7.576289] hub 6-0:1.0: usb_probe_interface - got id Feb 19 06:00:53 halley [ 7.576291] hub 6-0:1.0: USB hub found Feb 19 06:00:53 halley [ 7.576366] hub 6-0:1.0: 3 ports detected Feb 19 06:00:53 halley [ 7.576368] hub 6-0:1.0: standalone hub Feb 19 06:00:53 halley [ 7.576369] hub 6-0:1.0: no power switching (usb 1.0) Feb 19 06:00:53 halley [ 7.576371] hub 6-0:1.0: global over-current protection Feb 19 06:00:53 halley [ 7.576373] hub 6-0:1.0: power on to power good time: 4ms Feb 19 06:00:53 halley [ 7.576378] hub 6-0:1.0: local power source is good Feb 19 06:00:53 halley [ 7.576379] hub 6-0:1.0: no over-current condition exists Feb 19 06:00:53 halley [ 7.576382] hub 6-0:1.0: trying to enable port power on non-switchable hub Feb 19 06:00:53 halley [ 7.576417] drivers/usb/core/inode.c: creating file '001' Feb 19 06:00:53 halley [ 7.576543] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Feb 19 06:00:53 halley [ 7.576576] ohci_hcd 0000:00:14.5: setting latency timer to 64 Feb 19 06:00:53 halley [ 7.576579] ohci_hcd 0000:00:14.5: OHCI Host Controller Feb 19 06:00:53 halley [ 7.576603] drivers/usb/core/inode.c: creating file '007' Feb 19 06:00:53 halley [ 7.576607] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 Feb 19 06:00:53 halley [ 7.576615] ohci_hcd 0000:00:14.5: enabled AMD ISO transfers quirk Feb 19 06:00:53 halley [ 7.576633] ohci_hcd 0000:00:14.5: created debug files Feb 19 06:00:53 halley [ 7.576635] ohci_hcd 0000:00:14.5: supports USB remote wakeup Feb 19 06:00:53 halley [ 7.576651] ohci_hcd 0000:00:14.5: irq 18, io mem 0x92404000 Feb 19 06:00:53 halley [ 7.616048] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000 Feb 19 06:00:53 halley [ 7.636516] ohci_hcd 0000:00:14.5: OHCI controller state Feb 19 06:00:53 halley [ 7.636523] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers Feb 19 06:00:53 halley [ 7.636528] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3 Feb 19 06:00:53 halley [ 7.636532] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0 Feb 19 06:00:53 halley [ 7.636536] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF Feb 19 06:00:53 halley [ 7.636540] ohci_hcd 0000:00:14.5: intrenable 0x8000001a MIE UE RD WDH Feb 19 06:00:53 halley [ 7.636550] ohci_hcd 0000:00:14.5: hcca frame #0005 Feb 19 06:00:53 halley [ 7.636554] ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2) Feb 19 06:00:53 halley [ 7.636558] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 Feb 19 06:00:53 halley [ 7.636561] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE Feb 19 06:00:53 halley [ 7.636566] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.636570] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS Feb 19 06:00:53 halley [ 7.636589] usb usb7: default language 0x0409 Feb 19 06:00:53 halley [ 7.636596] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 Feb 19 06:00:53 halley [ 7.636598] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 19 06:00:53 halley [ 7.636600] usb usb7: Product: OHCI Host Controller Feb 19 06:00:53 halley [ 7.636601] usb usb7: Manufacturer: Linux 2.6.29-rc4 ohci_hcd Feb 19 06:00:53 halley [ 7.636603] usb usb7: SerialNumber: 0000:00:14.5 Feb 19 06:00:53 halley [ 7.636663] usb usb7: uevent Feb 19 06:00:53 halley [ 7.636682] usb usb7: usb_probe_device Feb 19 06:00:53 halley [ 7.636684] usb usb7: configuration #1 chosen from 1 choice Feb 19 06:00:53 halley [ 7.636692] usb usb7: adding 7-0:1.0 (config #1, interface 0) Feb 19 06:00:53 halley [ 7.636703] usb 7-0:1.0: uevent Feb 19 06:00:53 halley [ 7.636714] hub 7-0:1.0: usb_probe_interface Feb 19 06:00:53 halley [ 7.636716] hub 7-0:1.0: usb_probe_interface - got id Feb 19 06:00:53 halley [ 7.636718] hub 7-0:1.0: USB hub found Feb 19 06:00:53 halley [ 7.636792] hub 7-0:1.0: 2 ports detected Feb 19 06:00:53 halley [ 7.636794] hub 7-0:1.0: standalone hub Feb 19 06:00:53 halley [ 7.636796] hub 7-0:1.0: no power switching (usb 1.0) Feb 19 06:00:53 halley [ 7.636797] hub 7-0:1.0: global over-current protection Feb 19 06:00:53 halley [ 7.636799] hub 7-0:1.0: power on to power good time: 4ms Feb 19 06:00:53 halley [ 7.636804] hub 7-0:1.0: local power source is good Feb 19 06:00:53 halley [ 7.636805] hub 7-0:1.0: no over-current condition exists Feb 19 06:00:53 halley [ 7.636808] hub 7-0:1.0: trying to enable port power on non-switchable hub Feb 19 06:00:53 halley [ 7.636845] drivers/usb/core/inode.c: creating file '001' Feb 19 06:00:53 halley [ 7.676048] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000 Feb 19 06:00:53 halley [ 7.736102] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 Feb 19 06:00:53 halley [ 7.739893] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 Feb 19 06:00:53 halley [ 7.739970] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Feb 19 06:00:53 halley [ 8.584076] ohci_hcd 0000:00:12.0: auto-stop root hub Feb 19 06:00:53 halley [ 8.584095] ohci_hcd 0000:00:12.1: auto-stop root hub Feb 19 06:00:53 halley [ 8.584109] ohci_hcd 0000:00:13.0: auto-stop root hub Feb 19 06:00:53 halley [ 8.584124] ohci_hcd 0000:00:13.1: auto-stop root hub Feb 19 06:00:53 halley [ 8.832050] ohci_hcd 0000:00:14.5: auto-stop root hub Feb 19 06:00:53 halley [ 8.855876] EXT3 FS on sda6, internal journal Feb 19 06:00:53 halley [ 9.339211] Adding 1004020k swap on /dev/sda5. Priority:-1 extents:1 across:1004020k Feb 19 06:00:53 halley acpid: starting up Feb 19 06:00:53 halley acpid: 1 rule loaded Feb 19 06:00:56 halley acpid: client connected from 2291[103:1003] Feb 19 06:00:56 halley acpid: 1 client rule loaded Feb 19 06:00:57 halley init: Entering runlevel: 5 Feb 19 06:00:59 halley [ 18.802140] sky2 eth0: enabling interface Feb 19 06:01:01 halley [ 20.873083] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both Feb 19 06:01:02 halley sshd[3621]: Server listening on 0.0.0.0 port 22. Feb 19 06:01:04 halley acpid: client connected from 3737[0:0] Feb 19 06:01:04 halley acpid: 1 client rule loaded Feb 19 06:01:21 halley [ 40.749552] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002 Feb 19 06:01:21 halley [ 40.749564] ehci_hcd 0000:00:12.2: GetStatus port 1 status 001003 POWER sig=se0 CSC CONNECT Feb 19 06:01:21 halley [ 40.749572] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s Feb 19 06:01:21 halley [ 40.780054] ehci_hcd 0000:00:12.2: GetStatus port 1 status 001002 POWER sig=se0 CSC Feb 19 06:01:21 halley [ 40.908074] hub 1-0:1.0: debounce: port 1: total 125ms stable 100ms status 0x100 Feb 19 06:01:21 halley [ 40.908077] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002 Feb 19 06:01:21 halley [ 41.480980] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002 Feb 19 06:01:21 halley [ 41.480987] ehci_hcd 0000:00:12.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT Feb 19 06:01:21 halley [ 41.480995] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s Feb 19 06:01:21 halley [ 41.608077] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 Feb 19 06:01:22 halley [ 41.664075] ehci_hcd 0000:00:12.2: port 1 high speed Feb 19 06:01:22 halley [ 41.664079] ehci_hcd 0000:00:12.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT Feb 19 06:01:22 halley [ 41.720053] usb 1-1: new high speed USB device using ehci_hcd and address 2 Feb 19 06:01:22 halley [ 41.776066] ehci_hcd 0000:00:12.2: port 1 high speed Feb 19 06:01:22 halley [ 41.776069] ehci_hcd 0000:00:12.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT Feb 19 06:01:22 halley [ 41.853404] usb 1-1: config 1 interface 1 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 9 Feb 19 06:01:22 halley [ 41.853517] usb 1-1: default language 0x0409 Feb 19 06:01:22 halley [ 41.853890] usb 1-1: New USB device found, idVendor=0644, idProduct=800e Feb 19 06:01:22 halley [ 41.853892] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Feb 19 06:01:22 halley [ 41.853894] usb 1-1: Product: US-122L Feb 19 06:01:22 halley [ 41.853895] usb 1-1: Manufacturer: TASCAM Feb 19 06:01:22 halley [ 41.853897] usb 1-1: SerialNumber: no serial number Feb 19 06:01:22 halley [ 41.853980] usb 1-1: uevent Feb 19 06:01:22 halley [ 41.858454] usb 1-1: usb_probe_device Feb 19 06:01:22 halley [ 41.858461] usb 1-1: configuration #1 chosen from 1 choice Feb 19 06:01:22 halley [ 41.858893] usb 1-1: adding 1-1:1.0 (config #1, interface 0) Feb 19 06:01:22 halley [ 41.858921] usb 1-1:1.0: uevent Feb 19 06:01:22 halley [ 41.858935] usb 1-1: adding 1-1:1.1 (config #1, interface 1) Feb 19 06:01:22 halley [ 41.858947] usb 1-1:1.1: uevent Feb 19 06:01:22 halley [ 41.858957] drivers/usb/core/inode.c: creating file '002' Feb 19 06:01:22 halley [ 41.937766] snd-usb-us122l 1-1:1.0: usb_probe_interface Feb 19 06:01:22 halley [ 41.937771] snd-usb-us122l 1-1:1.0: usb_probe_interface - got id Feb 19 06:01:22 halley [ 41.937778] snd-usb-us122l 1-1:1.1: usb_probe_interface Feb 19 06:01:22 halley [ 41.937780] snd-usb-us122l 1-1:1.1: usb_probe_interface - got id Feb 19 06:01:22 halley [ 42.001305] ALSA sound/usb/usx2y/usb_stream.c:619: 0 Feb 19 06:01:22 halley [ 42.007039] ALSA sound/usb/usx2y/usb_stream.c:619: 0 Feb 19 06:01:24 halley sshd[3811]: SSH: Server;Ltype: Version;Remote: 10.0.0.4-32799;Protocol: 2.0;Client: OpenSSH_5.1p1-hpn13v5 Feb 19 06:01:25 halley [ 45.400094] ALSA sound/usb/usx2y/us122l.c:330: us122l_start error -14 Feb 19 06:01:25 halley [ 45.400120] snd-usb-us122l: probe of 1-1:1.1 failed with error -5 Feb 19 06:01:25 halley [ 45.400150] usbcore: registered new interface driver snd-usb-us122l
