Hi,
On Saturday 21 January 2017 12:20 AM, Stephen Boyd wrote:
> Some USB PHYs need to be told about vbus changing state
> explicitly. For example the qcom USB HS PHY needs to toggle a bit
> when vbus goes from low to high (VBUSVLDEXT) to cause the
> "session valid" signal to toggle. This signal will pull up D+
> when the phy starts running. If the vbus signal isn't routed to
> the PHY this "session valid" signal won't ever toggle, so we have
> to toggle it explicitly. This callback is used to do that.
>
> Cc: Peter Chen <peter.chen@xxxxxxx>
> Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
> ---
>
> New patch
>
> drivers/phy/phy-core.c | 15 +++++++++++++++
> include/linux/phy/phy.h | 10 ++++++++++
> 2 files changed, 25 insertions(+)
>
> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> index a268f4d6f3e9..8b1a6bfa5133 100644
> --- a/drivers/phy/phy-core.c
> +++ b/drivers/phy/phy-core.c
> @@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
> }
> EXPORT_SYMBOL_GPL(phy_set_mode);
>
> +int phy_set_vbus(struct phy *phy, int on)
> +{
> + int ret;
> +
> + if (!phy || !phy->ops->set_vbus)
> + return 0;
> +
> + mutex_lock(&phy->mutex);
> + ret = phy->ops->set_vbus(phy, on);
> + mutex_unlock(&phy->mutex);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(phy_set_vbus);
> +
> int phy_reset(struct phy *phy)
> {
> int ret;
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 78bb0d7f6b11..4d1ebde7fb14 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -36,6 +36,7 @@ enum phy_mode {
> * @power_on: powering on the phy
> * @power_off: powering off the phy
> * @set_mode: set the mode of the phy
> + * @set_vbus: enable/disable vbus in the phy (USB)
> * @reset: resetting the phy
> * @owner: the module owner containing the ops
> */
> @@ -45,6 +46,7 @@ struct phy_ops {
> int (*power_on)(struct phy *phy);
> int (*power_off)(struct phy *phy);
> int (*set_mode)(struct phy *phy, enum phy_mode mode);
> + int (*set_vbus)(struct phy *phy, int on);
please avoid adding usb specific ops in generic phy ops.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
