This series addresses a couple of FIFO issues in dwc2. The first it properly configures the GDIFIFOCFG registers in host/gadget mode. Next it configures the TX FIFOs to default values in gadget mode. These values should work for all cores. The old constant values were incorrect in some cases depending on the core configuration. These value may still be overridden on a per-platform basis and we add checks to make sure that overridden values are consistent with the hardware capabilities and fall-back to defaults if so. Test on Synopsys HAPS core version 3.30a. Appreciate any Tested-by's on other platforms. This series depends on the latest dwc2 patches for next and 4.10-rc5 [1] which you can find applied to my git tree for convenience [2]. Regards, John [1] https://www.spinics.net/lists/linux-usb/msg152258.html [2] https://github.com/synopsys-usb/linux.git Sevak Arakelyan (4): usb: dwc2: gadget: Set GDFIFOCFG usb: dwc2: host: Correct snpsid checking for GDFIFOCFG usb: dwc2: gadget: Set TX FIFO depths to calculated defaults usb: dwc2: gadget: Add checking for g-tx-fifo-size parameter drivers/usb/dwc2/core.h | 17 +++++---- drivers/usb/dwc2/gadget.c | 96 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc2/hcd.c | 3 +- drivers/usb/dwc2/params.c | 47 +++++++++++++++++++++-- 4 files changed, 151 insertions(+), 12 deletions(-) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
