Replace a couple of dev_info with dev_dbg and remove another.
Also use the port device for logging, and include a radix prefix when
logging the baudrate.
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/kl5kusb105.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 6cb45757818f..e6e083dace4b 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -143,10 +143,12 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
if (rc < 0)
dev_err(&port->dev,
"Change port settings failed (error = %d)\n", rc);
- dev_info(&port->serial->dev->dev,
- "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
- settings->pktlen, settings->baudrate, settings->databits,
- settings->unknown1, settings->unknown2);
+
+ dev_dbg(&port->dev,
+ "pktlen %u, baudrate 0x%02x, databits %u, u1 %u, u2 %u\n",
+ settings->pktlen, settings->baudrate, settings->databits,
+ settings->unknown1, settings->unknown2);
+
return rc;
}
@@ -175,8 +177,6 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
u8 *status_buf;
__u16 status;
- dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
-
status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
if (!status_buf)
return -ENOMEM;
@@ -199,8 +199,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
} else {
status = get_unaligned_le16(status_buf);
- dev_info(&port->serial->dev->dev, "read status %x %x\n",
- status_buf[0], status_buf[1]);
+ dev_dbg(&port->dev, "read status %02x %02x\n",
+ status_buf[0], status_buf[1]);
*line_state_p = klsi_105_status2linestate(status);
}
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
