Re: [PATCH 08/11] dmaengine: cppi41: Implement the glue for da8xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/09/2017 07:08 PM, Grygorii Strashko wrote:
> 
> 
> On 01/09/2017 10:06 AM, Alexandre Bailon wrote:
>> The da8xx has a cppi41 dma controller.
>> This is add the glue layer required to make it work on da8xx,
>> as well some changes in driver (e.g to manage clock).
>>
>> Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
>> ---
>>  drivers/dma/cppi41.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 95 insertions(+)
>>
>> diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
>> index 939398e..4318e53 100644
>> --- a/drivers/dma/cppi41.c
>> +++ b/drivers/dma/cppi41.c
>> @@ -1,3 +1,4 @@
>> +#include <linux/clk.h>
>>  #include <linux/delay.h>
>>  #include <linux/dmaengine.h>
>>  #include <linux/dma-mapping.h>
>> @@ -86,10 +87,19 @@
>>  
>>  #define USBSS_IRQ_PD_COMP	(1 <<  2)
>>  
>> +/* USB DA8XX */
>> +#define DA8XX_INTR_SRC_MASKED	0x38
>> +#define DA8XX_END_OF_INTR	0x3c
>> +
>> +#define DA8XX_QMGR_PENDING_MASK	(0xf << 24)
>> +
>> +
>> +
>>  /* Packet Descriptor */
>>  #define PD2_ZERO_LENGTH		(1 << 19)
>>  
>>  #define AM335X_CPPI41		0
>> +#define DA8XX_CPPI41		1
>>  
>>  struct cppi41_channel {
>>  	struct dma_chan chan;
>> @@ -158,6 +168,9 @@ struct cppi41_dd {
>>  
>>  	/* context for suspend/resume */
>>  	unsigned int dma_tdfdq;
>> +
>> +	/* da8xx clock */
>> +	struct clk *clk;
>>  };
>>  
>>  static struct chan_queues am335x_usb_queues_tx[] = {
>> @@ -232,6 +245,20 @@ static const struct chan_queues am335x_usb_queues_rx[] = {
>>  	[29] = { .submit = 30, .complete = 155},
>>  };
>>  
>> +static const struct chan_queues da8xx_usb_queues_tx[] = {
>> +	[0] = { .submit =  16, .complete = 24},
>> +	[1] = { .submit =  18, .complete = 24},
>> +	[2] = { .submit =  20, .complete = 24},
>> +	[3] = { .submit =  22, .complete = 24},
>> +};
>> +
>> +static const struct chan_queues da8xx_usb_queues_rx[] = {
>> +	[0] = { .submit =  1, .complete = 26},
>> +	[1] = { .submit =  3, .complete = 26},
>> +	[2] = { .submit =  5, .complete = 26},
>> +	[3] = { .submit =  7, .complete = 26},
>> +};
>> +
>>  struct cppi_glue_infos {
>>  	irqreturn_t (*isr)(int irq, void *data);
>>  	const struct chan_queues *queues_rx;
>> @@ -366,6 +393,26 @@ static irqreturn_t am335x_cppi41_irq(int irq, void *data)
>>  	return cppi41_irq(cdd);
>>  }
>>  
>> +static irqreturn_t da8xx_cppi41_irq(int irq, void *data)
>> +{
>> +	struct cppi41_dd *cdd = data;
>> +	u32 status;
>> +	u32 usbss_status;
>> +
>> +	status = cppi_readl(cdd->qmgr_mem + QMGR_PEND(0));
>> +	if (status & DA8XX_QMGR_PENDING_MASK)
>> +		cppi41_irq(cdd);
>> +	else
>> +		return IRQ_NONE;
>> +
>> +	/* Re-assert IRQ if there no usb core interrupts pending */
>> +	usbss_status = cppi_readl(cdd->usbss_mem + DA8XX_INTR_SRC_MASKED);
>> +	if (!usbss_status)
>> +		cppi_writel(0, cdd->usbss_mem + DA8XX_END_OF_INTR);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>>  static dma_cookie_t cppi41_tx_submit(struct dma_async_tx_descriptor *tx)
>>  {
>>  	dma_cookie_t cookie;
>> @@ -972,8 +1019,19 @@ static const struct cppi_glue_infos am335x_usb_infos = {
>>  	.platform = AM335X_CPPI41,
>>  };
>>  
>> +static const struct cppi_glue_infos da8xx_usb_infos = {
>> +	.isr = da8xx_cppi41_irq,
>> +	.queues_rx = da8xx_usb_queues_rx,
>> +	.queues_tx = da8xx_usb_queues_tx,
>> +	.td_queue = { .submit = 31, .complete = 0 },
>> +	.first_completion_queue = 24,
>> +	.qmgr_num_pend = 2,
>> +	.platform = DA8XX_CPPI41,
>> +};
>> +
>>  static const struct of_device_id cppi41_dma_ids[] = {
>>  	{ .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos},
>> +	{ .compatible = "ti,da8xx-cppi41", .data = &da8xx_usb_infos},
>>  	{},
>>  };
>>  MODULE_DEVICE_TABLE(of, cppi41_dma_ids);
>> @@ -995,6 +1053,13 @@ static int is_am335x_cppi41(struct device *dev)
>>  	return cdd->platform == AM335X_CPPI41;
>>  }
>>  
>> +static int is_da8xx_cppi41(struct device *dev)
>> +{
>> +	struct cppi41_dd *cdd = dev_get_drvdata(dev);
>> +
>> +	return cdd->platform == DA8XX_CPPI41;
>> +}
>> +
>>  #define CPPI41_DMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
>>  				BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
>>  				BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
>> @@ -1058,6 +1123,21 @@ static int cppi41_dma_probe(struct platform_device *pdev)
>>  	cdd->first_completion_queue = glue_info->first_completion_queue;
>>  	cdd->platform = glue_info->platform;
>>  
>> +	if (is_da8xx_cppi41(dev)) {
>> +		cdd->clk = devm_clk_get(&pdev->dev, "usb20");
>> +		ret = PTR_ERR_OR_ZERO(cdd->clk);
>> +		if (ret) {
>> +			dev_err(&pdev->dev, "failed to get clock\n");
>> +			goto err_clk_en;
>> +		}
>> +
>> +		ret = clk_prepare_enable(cdd->clk);
>> +		if (ret) {
>> +			dev_err(dev, "failed to enable clock\n");
>> +			goto err_clk_en;
>> +		}
>> +	}
> 
> if this is functional clock then why not to use ./arch/arm/mach-davinci/pm_domain.c ?
> wouldn't it work for use if you will just rename "usb20" -> "fck" -
> so PM runtime should manage this clock for you?
As is, I don't think it will work.
The usb20 is shared by the cppi41 and the usb otg.
So, if we rename "usb20" to "fck", clk_get() won't be able to find the
clock.
But may be adding "usb20" to "con_ids" in
arch/arm/mach-davinci/pm_domain.c could work.
But I think it will require some changes in da8xx musb driver.
I will take look.

Thanks,
Alexandre
> 
>> +
>>  	ret = of_property_read_u32(dev->of_node,
>>  				   "#dma-channels", &cdd->n_chans);
>>  	if (ret)
>> @@ -1112,6 +1192,9 @@ static int cppi41_dma_probe(struct platform_device *pdev)
>>  err_init_cppi:
>>  	pm_runtime_dont_use_autosuspend(dev);
>>  err_get_n_chans:
>> +	if (is_da8xx_cppi41(dev))
>> +		clk_disable_unprepare(cdd->clk);
>> +err_clk_en:
>>  err_get_sync:
>>  	pm_runtime_put_sync(dev);
>>  	pm_runtime_disable(dev);
>> @@ -1146,6 +1229,8 @@ static int cppi41_dma_remove(struct platform_device *pdev)
>>  	pm_runtime_dont_use_autosuspend(&pdev->dev);
>>  	pm_runtime_put_sync(&pdev->dev);
>>  	pm_runtime_disable(&pdev->dev);
>> +	if (is_da8xx_cppi41(&pdev->dev))
>> +		clk_disable_unprepare(cdd->clk);
>>  	return 0;
>>  }
>>  
>> @@ -1158,6 +1243,9 @@ static int __maybe_unused cppi41_suspend(struct device *dev)
>>  		cppi_writel(0, cdd->usbss_mem + USBSS_IRQ_CLEARR);
>>  	disable_sched(cdd);
>>  
>> +	if (is_da8xx_cppi41(dev))
>> +		clk_disable_unprepare(cdd->clk);
>> +
>>  	return 0;
>>  }
>>  
>> @@ -1165,8 +1253,15 @@ static int __maybe_unused cppi41_resume(struct device *dev)
>>  {
>>  	struct cppi41_dd *cdd = dev_get_drvdata(dev);
>>  	struct cppi41_channel *c;
>> +	int ret;
>>  	int i;
>>  
>> +	if (is_da8xx_cppi41(dev)) {
>> +		ret = clk_prepare_enable(cdd->clk);
>> +		if (ret)
>> +			return ret;
>> +	}
>> +
>>  	for (i = 0; i < DESCS_AREAS; i++)
>>  		cppi_writel(cdd->descs_phys, cdd->qmgr_mem + QMGR_MEMBASE(i));
>>  
>>
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux