Currently the upper limit for the endpoint index during fifo size
config was always 16 instead of the available endpoints. So fix this
by using the determined amount of endpoints and avoid a warning about
"insufficient fifo memory" on bcm2835 which has only 8 endpoints.
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Fixes: 0a176279db68 ("usb: dwc2: gadget: configure fifos from device tree")
---
drivers/usb/dwc2/gadget.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Since revert of ("usb: dwc2: gadget: fix TX FIFO size and address") which
caused regressions on some platforms this is the second attempt to fix
gadget support for bcm2835.
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index b95930f..b00184c 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -228,7 +228,7 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
* them to endpoints dynamically according to maxpacket size value of
* given endpoint.
*/
- for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
+ for (ep = 1; ep < hsotg->num_of_eps; ep++) {
if (!txfsz[ep])
continue;
val = addr;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
