On Fri, Dec 16, 2016 at 01:19:05PM +0000, Aidan Thornton wrote: > On Wed, Dec 14, 2016 at 3:28 PM, Johan Hovold <johan@xxxxxxxxxx> wrote: > > The ch341 driver is based on reverse-engineering and contains some bits > > which appear to be redundant and some which appear incompatible which > > certain devices. > > > > Specifically, some CH340 devices seem unable to change the initial line > > settings, which have so far been set to 5N1. Let's use a more reasonable > > 8N1 default instead. > > > > Note that we also need to set the ENABLE_RX bit or receive will be > > disabled after a reset during resume. > > Lost track a little of the testing, but I don't think you ever got > Russel to test whether this worked using a driver that tried to change > this through direct register writes which seem to be the only thing > that has any effect on this strange hardware variant. Would be a > little surprised if it didn't at this point - changing the line > settings that way after initialization certainly works well enough to > cause us all a headache. I believe he did test this against my usb-linus branch, which did not have your recent changes. IIRC both removing that first LCR write and changing it to 0xc3 worked, but maybe you're right and we only verified removing it. In the same setup, changing the word size after successful initialisation using direct register writes did not work however, and the device appeared stuck at 5N1 or 8N1 depending on if the initial 0x50 LCR write was left in or not. > If so, I suggest it might be clearer to drop this patch altogether in > favour of patch 10 in the series, since the underlying problem is that > setting the baudrate and LCR register didn't work and patch 10 fixes > that. These two patches are definitely related, and I struggled a bit about how to order things as I wanted to find a way to backport this minimal change (from 5N1 to 8N1) without having to depend on the upcoming changes in 4.10 (your changes) as that may be enough to enable support in older kernels. I'll respin this, once we learn more about how those quirky devices work. Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
