On Tue, Dec 13, 2016 at 4:28 AM, Vardan Mikayelyan
<Vardan.Mikayelyan@xxxxxxxxxxxx> wrote:
> On 12/13/2016 11:12 AM, John Stultz wrote:
>> When removing a USB-A to USB-otg adapter cable, we get a change
>> status irq, and then in dwc2_conn_id_status_change, we
>> erroniously see the GOTGCTL_CONID_B flag set. This causes us to
>> get stuck in the "while (!dwc2_is_device_mode(hsotg))" loop,
>> spitting out "Waiting for Peripheral Mode, Mode=Host" warnings
>> until it fails out many seconds later.
>>
>> This patch works around the issue by re-reading the GOTGCTL
>> state to check if the GOTGCTL_CONID_B is still set and if not
>> restarting the change status logic.
>>
>> I suspect this isn't the best solution, but it seems to work
>> well for me.
>>
>> Feedback would be greatly appreciated!
>>
>> Cc: Wei Xu <xuwei5@xxxxxxxxxxxxx>
>> Cc: Guodong Xu <guodong.xu@xxxxxxxxxx>
>> Cc: Amit Pundir <amit.pundir@xxxxxxxxxx>
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Cc: John Youn <johnyoun@xxxxxxxxxxxx>
>> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
>> Cc: Chen Yu <chenyu56@xxxxxxxxxx>
>> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
>> Cc: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
>> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>> Cc: linux-usb@xxxxxxxxxxxxxxx
>> Acked-by: John Youn <johnyoun@xxxxxxxxxxxx>
>> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
>> ---
>> drivers/usb/dwc2/hcd.c | 5 ++++-
>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
>> index df5a065..a3f34dd 100644
>> --- a/drivers/usb/dwc2/hcd.c
>> +++ b/drivers/usb/dwc2/hcd.c
>> @@ -3199,7 +3199,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
>> dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
>> dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
>> !!(gotgctl & GOTGCTL_CONID_B));
>> -
>> +again:
>> /* B-Device connector (Device Mode) */
>> if (gotgctl & GOTGCTL_CONID_B) {
>> /* Wait for switch to device mode */
>> @@ -3210,6 +3210,9 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
>> dwc2_is_host_mode(hsotg) ? "Host" :
>> "Peripheral");
>> usleep_range(20000, 40000);
>> + gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
>> + if (!(gotgctl & GOTGCTL_CONID_B))
>> + goto again;
>> if (++count > 250)
>> break;
>> }
>>
> Hi John Stultz,
>
> When it goes to ":again", it will go to else anyways. I'll suggest
> alternative way to do this. Please see below.
Sounds good. I've made the change.
> Also you can add "Reviewed-by: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>"
Thanks so much for your review!
-john
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
