On Fri, Dec 09, 2016 at 05:06:39PM -0200, Sergio Prado wrote:
> Adds the device tree bindings description for Samsung S3C2410 and
> compatible USB device controller.
>
> Signed-off-by: Sergio Prado <sergio.prado@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/usb/s3c2410-usb.txt | 28 ++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
> index e45b38ce2986..4d3f9894c2d4 100644
> --- a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
> @@ -20,3 +20,31 @@ usb0: ohci@49000000 {
> clocks = <&clocks UCLK>, <&clocks HCLK_USBH>;
> clock-names = "usb-bus-host", "usb-host";
> };
> +
> +Samsung S3C2410 and compatible USB device controller
> +
> +Required properties:
> + - compatible: Should be one of the following
> + "samsung,s3c2410-udc"
> + "samsung,s3c2440-udc"
> + - reg: address and length of the controller memory mapped region
> + - interrupts: interrupt number for the USB device controller
> + - clocks: Should reference the bus and host clocks
> + - clock-names: Should contain two strings
> + "usb-bus-gadget" for the USB bus clock
Pretty sure the h/w clock name in the datasheet does not use the Linux
term gadget.
> + "usb-device" for the USB device clock
> +
> +Optional properties:
> + - samsung,vbus-gpio: If present, specifies a gpio that needs to be
> + activated for the bus to be powered.
Isn't it the host side that controls Vbus?
> + - samsung,pullup-gpio: If present, specifies a gpio to control the
Both GPIOs need to specify the active state.
> + USB D+ pullup.
> +
> +usb1: udc@52000000 {
> + compatible = "samsung,s3c2440-udc";
> + reg = <0x52000000 0x100000>;
> + interrupts = <0 0 25 3>;
> + clocks = <&clocks UCLK>, <&clocks HCLK_USBD>;
> + clock-names = "usb-bus-gadget", "usb-device";
> + samsung,pullup-gpio = <&gpc 5 GPIO_ACTIVE_HIGH>;
> +};
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
