Re: [PATCH v2] USB: OHCI: pxa27x:fix warnings and error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 07, 2016 at 11:37:45PM +0000, csmanjuvijay@xxxxxxxxx wrote:
> From: Manjunath Goudar <csmanjuvijay@xxxxxxxxx>
> 
> This patch will fix the checkpatch.pl following warnings and error:
> WARNING: Block comments use * on subsequent lines
> WARNING: Block comments use a trailing */ on a separate line
> WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev,
> ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
> ERROR: space prohibited after that open parenthesis '('
> 
> Signed-off-by: Manjunath Goudar <csmanjuvijay@xxxxxxxxx>
> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: linux-usb@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> ---
> changelog V1->V2:
> Warnings and error message is added to the patch discrition.
> 
>  drivers/usb/host/ohci-pxa27x.c | 24 +++++++++++-------------
>  1 file changed, 11 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
> index 79efde8f..73445ab 100644
> --- a/drivers/usb/host/ohci-pxa27x.c
> +++ b/drivers/usb/host/ohci-pxa27x.c
> @@ -106,7 +106,8 @@
>  #define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
>  #define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
>  #define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
> -					   Interrupt Enable*/
> +					 * Interrupt Enable
> +					 */
>  #define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
>  #define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
>  
> @@ -128,14 +129,14 @@ struct pxa27x_ohci {
>  #define to_pxa27x_ohci(hcd)	(struct pxa27x_ohci *)(hcd_to_ohci(hcd)->priv)
>  
>  /*
> -  PMM_NPS_MODE -- PMM Non-power switching mode
> -      Ports are powered continuously.
> -
> -  PMM_GLOBAL_MODE -- PMM global switching mode
> -      All ports are powered at the same time.
> -
> -  PMM_PERPORT_MODE -- PMM per port switching mode
> -      Ports are powered individually.
> + * PMM_NPS_MODE -- PMM Non-power switching mode
> + *     Ports are powered continuously.
> + *
> + * PMM_GLOBAL_MODE -- PMM global switching mode
> + *     All ports are powered at the same time.
> + *
> + * PMM_PERPORT_MODE -- PMM per port switching mode
> + *     Ports are powered individually.
>   */
>  static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode)
>  {
> @@ -157,10 +158,7 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode)
>  		uhcrhdb |= (0x7<<17);
>  		break;
>  	default:
> -		printk( KERN_ERR
> -			"Invalid mode %d, set to non-power switch mode.\n",
> -			mode );
> -
> +		dev_err(mode, "Invalid mode %d,set to non-power switch mode.\n");

Did you even compile this code?

Please do so...

And don't mix different types of fixes in the same patch please.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux