* Felipe Balbi <balbi@xxxxxxxxxx> [161208 01:45]: > > Hi, > > Tony Lindgren <tony@xxxxxxxxxxx> writes: > > Somehow starting with v4.9-rc7 there have been imprecise > > There's nothing touching dwc3 since v4.9-rc5. Right, nothing obvious has changed. I think it's just a slight timing change in the code that started triggering it. > > external aborts on omap5-uevm dwc3 controller. I have not been > > able to bisect what exactly triggered this as it does not always > > happen. It seems that something changed with probing that > > now exposes the issue: > > > > Unhandled fault: imprecise external abort (0x1406) at 0x00000000 > > hmmm, clock disabled... dwc3-omap shouldn't have pm runtime at all. It does for the interconnect target module clkctrl register via PM runtime. That's the "usb_otg_ss" module. > > ... > > PC is at dwc3_omap_interrupt_thread+0x20/0x80 > > LR is at irq_thread_fn+0x1c/0x54 > > ... > > [<c0989fa8>] (dwc3_omap_interrupt_thread) from [<c038a4d8>] > > (irq_thread_fn+0x1c/0x54) > > [<c038a4d8>] (irq_thread_fn) from [<c038a7b0>] (irq_thread+0x12c/0x1f0) > > [<c038a7b0>] (irq_thread) from [<c035d6f0>] (kthread+0xdc/0xf4) > > [<c035d6f0>] (kthread) from [<c0307d78>] (ret_from_fork+0x14/0x3c) > > ... > > > > Unable to handle kernel paging request at virtual address ffffffec > > ... > > Internal error: Oops: 37 [#2] SMP ARM > > PC is at kthread_data+0x4/0xc > > LR is at irq_thread_dtor+0x28/0xd0 > > ... > > [<c035e0b4>] (kthread_data) from [<c038a5dc>] (irq_thread_dtor+0x28/0xd0) > > [<c038a5dc>] (irq_thread_dtor) from [<c035bef0>] (task_work_run+0xb8/0xdc) > > [<c035bef0>] (task_work_run) from [<c03448d4>] (do_exit+0x314/0xa20) > > [<c03448d4>] (do_exit) from [<c030bea8>] (die+0x410/0x474) > > [<c030bea8>] (die) from [<c0301350>] (do_DataAbort+0xb4/0xb8) > > [<c0301350>] (do_DataAbort) from [<c030c578>] (__dabt_svc+0x58/0x80) > > Exception stack(0xee777ec8 to 0xee777f10) > > 7ec0: 0000014d ee6e6f10 00000034 fc020034 ee6e6f10 ee1eec00 > > 7ee0: 00000000 00000000 ee6ec640 c038a4bc 00000000 00000000 00000000 ee777f18 > > 7f00: c038a4d8 c0989fa8 60000013 ffffffff > > [<c030c578>] (__dabt_svc) from [<c0989fa8>] (dwc3_omap_interrupt_thread+0x20/0x80) > > [<c0989fa8>] (dwc3_omap_interrupt_thread) from [<c038a4d8>] (irq_thread_fn+0x1c/0x54) > > [<c038a4d8>] (irq_thread_fn) from [<c038a7b0>] (irq_thread+0x12c/0x1f0) > > [<c038a7b0>] (irq_thread) from [<c035d6f0>] (kthread+0xdc/0xf4) > > [<c035d6f0>] (kthread) from [<c0307d78>] (ret_from_fork+0x14/0x3c) > > > > Fix the issue by making sure the dwc3 interrupts are disabled > > before we call devm_request_threaded_irq(). > > that should already be the case. Are you sure that register isn't zero > in probe? Looks like irq0_status = 0 and irqmisc_status = 0x2121. Also just clearing irqmisc with dwc3_omap_write_irqmisc_clr(omap, 0xffffffff) stops the issue from happening. There is some deferred probing happening but irqmisc is always 0x2121. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
