From: Thierry Vignaud <tvignaud@xxxxxxxxxxxx> Remove old comments about USB_EHCI_HCD. Cc: Greg KH <greg@xxxxxxxxx> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/usb/host/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff -puN drivers/usb/host/Kconfig~usb-kill-prehistorical-comments-about-usb_ehci_hcd drivers/usb/host/Kconfig --- a/drivers/usb/host/Kconfig~usb-kill-prehistorical-comments-about-usb_ehci_hcd +++ a/drivers/usb/host/Kconfig @@ -24,10 +24,7 @@ config USB_EHCI_HCD The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. If your USB host controller supports USB 2.0, you will likely want to - configure this Host Controller Driver. At the time of this writing, - the primary implementation of EHCI is a chip from NEC, widely available - in add-on PCI cards, but implementations are in the works from other - vendors including Intel and Philips. Motherboard support is appearing. + configure this Host Controller Driver. EHCI controllers are packaged with "companion" host controllers (OHCI or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports _ -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
