On Fri, Nov 18, 2016 at 2:17 PM, Tal Shorer <tal.shorer@xxxxxxxxx> wrote: > Currently, each hub class request constant is defined by a line like: > #define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) > > The "magic" number for the high byte is one of 0x20, 0xa0, 0x23, 0xa3. > The 0x80 bit that changes inditace USB_DIR_IN, and the 0x03 that > pops up is the difference between USB_RECIP_DEVICE (0x00) and > USB_RECIP_OTHER (0x03). The constant 0x20 bit is USB_TYPE_CLASS. > > This patch eliminates those magic numbers by defining a macro to help > construct these hub class request from simpler constants. > Note that USB_RT_HUB is defined as (USB_TYPE_CLASS | USB_RECIP_DEVICE) > and that USB_RT_PORT is defined as (USB_TYPE_CLASS | USB_RECIP_OTHER). > > Signed-off-by: Tal Shorer <tal.shorer@xxxxxxxxx> > --- > include/linux/usb/hcd.h | 19 ++++++++++--------- > 1 file changed, 10 insertions(+), 9 deletions(-) > > diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h > index 66fc137..40edf6a 100644 > --- a/include/linux/usb/hcd.h > +++ b/include/linux/usb/hcd.h > @@ -566,21 +566,22 @@ extern void usb_ep0_reinit(struct usb_device *); > ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) > > /* class requests from the USB 2.0 hub spec, table 11-15 */ > +#define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request)) > /* GetBusState and SetHubDescriptor are optional, omitted */ > -#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) > -#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE) > -#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR) > -#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS) > -#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS) > -#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE) > -#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE) > +#define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_CLEAR_FEATURE) > +#define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_CLEAR_FEATURE) > +#define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_DESCRIPTOR) > +#define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_STATUS) > +#define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, USB_REQ_GET_STATUS) > +#define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_SET_FEATURE) > +#define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_SET_FEATURE) > > > /*-------------------------------------------------------------------------*/ > > /* class requests from USB 3.1 hub spec, table 10-7 */ > -#define SetHubDepth (0x2000 | HUB_SET_DEPTH) > -#define GetPortErrorCount (0xa300 | HUB_GET_PORT_ERR_COUNT) > +#define SetHubDepth HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, HUB_SET_DEPTH) > +#define GetPortErrorCount HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_PORT_ERR_COUNT) > > /* > * Generic bandwidth allocation constants/support > -- > 2.5.0 > ping? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
